D. Coutellier

H. Naceur, M. Klingler, D. Coutellier, 2014, 2014 15th International Conference on Thermal, Mechanical and Mulit-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE).

Meshless modeling of bending behavior of bi-directional functionally graded beam structures

Guoqun Zhao, Yanjin Guan, H. Naceur, 2018, Composites Part B: Engineering.

Geometrically nonlinear analysis of thin-walled structures using efficient Shell-based SPH method

H. Naceur, A. Laksimi, Jun Lin, 2014 .

Meshless SPH analysis for transient heat conduction in the functionally graded structures

Yanjin Guan, H. Naceur, Guangchun Wang, 2021 .

Meshless analysis of bi-directional functionally graded beam structures based on physical neutral surface

Guoqun Zhao, Yanjin Guan, H. Naceur, 2021 .

NEW METHODOLOGY TO STUDY THE BEHAVIOUR OF DELAMINATED COMPOSITE STRUCTURES

D. Coutellier, J. Walrick, P. Geoffroy, 1999 .

Study of the influence of the number of inter-ply interfaces on the bearing rupture of riveted composite assemblies

E. Deletombe, D. Coutellier, D. Delsart, 2008 .

Development of a new nonlinear numerical material model for woven composite materials accounting for permanent deformation and damage

H. Naceur, P. Camanho, D. Coutellier, 2013 .

Numerical modeling of nonlinearity, plasticity and damage in CFRP-woven composites for crash simulations

H. Naceur, P. Camanho, D. Coutellier, 2014 .

Numerical modeling of the low-velocity impact of composite plates using a shell-based SPH method

S. Abrate, H. Naceur, J. Lin, 2015, Meccanica.

Measurements of dynamic properties of ballistic yarns using innovative testing devices

F. Boussu, D. Coutellier, C. Chevalier, 2016 .

Damage evolution in a filled epoxy resin

A. Zimmermann, Y. Cai, D. Coutellier, 2006 .

Efficient smoothed particle hydrodynamics method for the analysis of planar structures undergoing geometric nonlinearities

H. Naceur, A. Laksimi, Jun Lin, 2015, Journal of Mechanical Science and Technology.

Effect of the compatilizer and chemical treatments on the performance of poly(lactic acid)/ramie fiber composites

Guoqun Zhao, Yanjin Guan, H. Naceur, 2021 .

Through-thickness strength measurements using Arcan’s method

P. Gning, D. Coutellier, D. Delsart, 2010 .

Strain rate effects on the compressive response of wood and energy absorption capabilities – Part A: Experimental investigations

H. Morvan, M. Oudjene, D. Coutellier, 2016 .

On the development of a modified button shear specimen to characterize the mixed mode delamination toughness

Daniel Coutellier, B. Wunderle, B. Wunderle, 2012 .

Power Cycling Reliability of Power Module: A Survey

C. Durand, M. Klingler, D. Coutellier, 2016, IEEE Transactions on Device and Materials Reliability.

Investigations on Damage in a Filled Epoxy Resin

R. Gmbh, A. Zimmermann, Y. Cai, 2006 .

Solder fatigue failures in a new designed power module under Power Cycling

M. Klingler, M. Bigerelle, C. Durand, 2016, Microelectron. Reliab..

Efficient thermomechanical analysis of functionally graded structures using the symmetric SPH method

Guoqun Zhao, Hakim Naceur, Daniel Coutellier, 2021 .

New Textile Composite Solutions for Armouring of Vehicles

F. Boussu, D. Coutellier, B. Provost, 2019, Advances in Materials Science and Engineering.

Efficient smoothed particle hydrodynamics method for the analysis of planar structures undergoing geometric nonlinearities

H. Naceur, A. Laksimi, Jun Lin, 2015 .

Multi-layered multi-material finite element for crashworthiness studies

Daniel Coutellier, Patrick Rozycki, P. Rozycki, 2000 .

A new reduced model of scavenging to optimize cylinder design

Xavier Fischer, Daniel Coutellier, Bertrand Carré, 2016, Simul..

Simulation of dry and lubricated contacts in multi-body systems

Daniel Coutellier, Johannes Müllers, Éric Quetel, 2008 .

On the modeling and design of composite multilayered structures using solid-shell finite element model

Hakim Naceur, Daniel Coutellier, Jean-Louis Batoz, 2013 .

Strain rate effects on the compressive response of wood and energy absorption capabilities – Part B: Experimental investigation under rigid lateral confinement

H. Morvan, M. Oudjene, D. Coutellier, 2018, Composite Structures.

Study of fatigue failure in Al-chip-metallization during power cycling

Hakim Naceur, Daniel Coutellier, Markus Klingler, 2015 .

Modelling Laminate Failure

P. Camanho, S. Hartmann, D. Coutellier, 2016 .

Influence of the advanced joint path strategies on the energy absorption capacity of Ti-6Al-4V Taylor bar based on additive manufacturing

Huayan Pu, H. Naceur, D. Coutellier, 2022, Journal of Thermal Stresses.

Armouring solutions against high-velocity impact using 2D laminates and 3D warp interlock composites

F. Boussu, D. Vallée, D. Coutellier, 2014 .

Thermo-mechanical analysis of Ti-6Al-4V Taylor bar using advanced joint path strategies based on additive manufacturing

Huayan Pu, H. Naceur, D. Coutellier, 2023, CIRP Journal of Manufacturing Science and Technology.

Outcomes of MADMAX the European network on composites for transport applications

D. Coutellier, M. Vouters, C. Magniez, 2017 .

Research in Interactive Design: Proceedings of Virtual Concept 2005

Xavier Fischer, Daniel Coutellier, X. Fischer, 2006 .

Composites and Dynamic Failures: Experimental and Numerical Solving Strategies and Solutions

Daniel Coutellier, D. Coutellier, 2013 .

Presentation of a methodology for delamination detection within laminated structures

D. Coutellier, J. Walrick, P. Geoffroy, 2006 .

Development of a New Methodology for Delamination Detection in Laminated Structures

D. Coutellier, J. Walrick, P. Geoffroy, 2002 .

Exact forming for additive manufacturing using an irregular element-based compensating approach: Simulation, experiment, and detection

Huayan Pu, H. Naceur, D. Coutellier, 2023, Mechanics of Advanced Materials and Structures.

Advances in Integrated Design and Manufacturing in Mechanical Engineering

Alan N Bramley, Daniel Brissaud, Daniel Coutellier, 2006 .