Y. Kişioğlu

发表

Comparison of the Lag Screw Placements for the Treatment of Stable and Unstable Intertrochanteric Femoral Fractures regarding Trabecular Bone Failure

A. Ozkan, Talip Çelik, I. Mutlu, 2016, Journal of medical engineering.

Evaluation of new hip prosthesis design with finite element analysis

Talip Çelik, Y. Kişioğlu, 2019, Australasian Physical & Engineering Sciences in Medicine.

EVALUATIONS OF MECHANICAL PROPERTIES FOR FREE-RANGE AND CAGED CHICKEN FEMURS

Talip Çelik, Y. Kişioğlu, Büsra Ağın, 2022, Australian Journal of Mechanical Engineering.

The effect of proximal tibial corrective osteotomy on menisci, tibia and tarsal bones: a finite element model study of tibia vara

Talip Çelik, I. Mutlu, Y. Kişioğlu, 2014, The international journal of medical robotics + computer assisted surgery : MRCAS.

Stress distribution comparisons of foot bones in patient with tibia vara: a finite element study.

A. Ozkan, Talip Çelik, I. Mutlu, 2013, Acta of bioengineering and biomechanics.

COMPARATION OF THREE DIMENSIONAL SIMULATION AND TWO DIMENSIONAL IMAGE EDITOR SOFTWARES AT THE PRE SURGERY PLANNING

Talip Çelik, I. Mutlu, Y. Kişioğlu, 2012 .

Improving the fatigue life of produced dental implants by the thread-rolling process

S. Aktas, Y. Kişioğlu, 2022, Materials Testing.

Effects of thread rolling processing parameters on mechanical properties and microstructures of high-strength bolts

S. Aktas, Y. Kişioğlu, 2020, Materials Testing.

New Hip Prosthesis Design and Evaluation with Using Finite Element Analysis

Talip Çelik, Yasin Kişioğlu, Talip Çelik, 2020, Journal of Polytechnic.

The evaluation of the relation between dynamic hip screw positions and its failure in unstable femur fractures

A. Ozkan, Talip Çelik, I. Mutlu, 2019, Australian Journal of Mechanical Engineering.

The effect of cement on hip stem fixation: a biomechanical study

Talip Çelik, I. Mutlu, Y. Kişioğlu, 2017, Australasian Physical & Engineering Sciences in Medicine.

Evaluation of contact characteristics of a patient-specific artificial dysplastic hip joint.

Yasin Kisioglu, Levent Buluc, Ibrahim Mutlu, 2014, Acta of bioengineering and biomechanics.

EFFECTS OF SALTER PELVIC OSTEOTOMY ANGLE ON CONTACT AREA AND PRESSURE DISTRIBUTION IN THE HIP JOINT: AN EXPERIMENTAL STUDY

Talip Çelik, I. Mutlu, Y. Kişioğlu, 2014 .

Metatarsal bone model production using 3D printing and comparison of material properties with results obtained from CT-based modeling and real bone

Talip Çelik, Y. Kişioğlu, Z. Coşkun, 2023, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Design and Manufacture of the Torque Test Setup For Small and Shapeless Materials

Talip Çelik, Y. Kişioğlu, Z. Coşkun, 2021 .

Development of a New Universal Test Bench for Endosseous Dental Implants

E. Kelebekler, S. Aktas, Y. Kişioğlu, 2021, Experimental Techniques.

Burst tests and volume expansions of vehicle toroidal LPG fuel tanks

Yasin Kişioğlu, Y. Kişioğlu, 2009 .

Minimum Material Design for Propane Cylinder End Closures

G. L. Kinzel, Yasin Kisioglu, Jerald R. Brevick, 2008 .

The Gray-level Co-occurrence Matrix Approach to Measure Uniformity of Fuji Prescale Pressure Sensitive Film Samples

Talip Çelik, I. Mutlu, Y. Kişioğlu, 2021 .

Higher order regression functions result better fit for the calibration curve

I. Mutlu, Y. Kişioğlu, İ. Mutlu, 2013, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Optimization of processing parameters of a developed new driller system for orthopedic surgery applications using Taguchi method

Kadir Gok, Arif Gok, Yasin Kisioglu, 2014, The International Journal of Advanced Manufacturing Technology.

Determination of burst pressure and location of the DOT-39 refrigerant cylinders

G. L. Kinzel, Yasin Kisioglu, Jerald R. Brevick, 2001 .

Failure analysis of support during profile cutting process using horizontal milling machine

Kadir Gok, Suleyman Neseli, Erol Turkes, 2014 .

Failure analysis of support during profile cutting process using horizontal milling machine

E. Turkes, Suleyman Neseli, Y. Kişioğlu, 2013, The International Journal of Advanced Manufacturing Technology.

Fatigue properties of die cast magnesium alloys

P. Rodrigo, Y. Kişioğlu, V. Chandrasekar, 2000 .

Kalça protezi stabilitesinin harmonik cevap analizi ile değerlendirilmesi Evaluation of hip prosthesis stability via harmonic response analysis

Talip Çelik, Y. Kişioğlu, Kalça Protezi, 2019 .

Development of a new driller system to prevent the osteonecrosis in orthopedic surgery applications

Kadir Gok, Yasin Kisioglu, Levent Buluc, 2015 .

Development of a new driller system to prevent the osteonecrosis in orthopedic surgery applications

Y. Kişioğlu, L. Buluç, U. S. Muezzinoglu, 2014, Journal of the Brazilian Society of Mechanical Sciences and Engineering.

Effects of Weld Zone Properties on Burst Pressures and Failure Locations

Y. Kişioğlu, 2005 .

A New End-Closure Design for DOT-4BA Propane Cylinders

Yasin Kişioğlu, Y. Kişioğlu, 2007 .