B. Linke

发表

Biomechanical Evaluation of the Proximal Femoral Nail

A. V. van Vugt, E. Schneider, I. Schipper, 2002, Clinical orthopaedics and related research.

Mechanical Comparison in Cadaver Specimens of Three Different 90-Degree Double-Plate Osteosyntheses for Simulated C2-Type Distal Humerus Fractures With Varying Bone Densities

K. Schwieger, J. Korner, G. Diederichs, 2008, Journal of orthopaedic trauma.

Lateral Insertion Points in Antegrade Femoral Nailing and Their Influence on Femoral Bone Strains

K. Schwieger, M. Verhofstad, B. Linke, 2008, Journal of orthopaedic trauma.

Correlation of biomechanical stiffness with plain radiographic and ultrasound data in an experimental mandibular distraction wound.

J. Glowacki, L. Kaban, M. Troulis, 2003, International journal of oral and maxillofacial surgery.

Improved anchorage in osteoporotic vertebrae with new implant designs

J. Goldhahn, E. Schneider, M. Reinhold, 2006, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Factors affecting the stability of screws in human cortical osteoporotic bone: a cadaver study.

E. Schneider, C. Lill, B. Linke, 2007, The Journal of bone and joint surgery. British volume.

A Biomechanical Evaluation of Methods of Distal Humerus Fracture Fixation Using Locking Compression Plates Versus Conventional Reconstruction Plates

E. Schneider, H. Lill, J. Korner, 2004, Journal of orthopaedic trauma.

Angle stable interlocking screws improve construct stability of intramedullary nailing of distal tibia fractures: a biomechanical study.

K Schwieger, K. Schwieger, B. Gueorguiev, 2009, Injury.

Assessment of stiffness and strength of 4 different implants available for equine fracture treatment: a study on a 20 degrees oblique long-bone fracture model using a bone substitute.

M. Florin, B. Linke, J. Auer, 2005, Veterinary surgery : VS.

Comparison of double dynamic compression plating versus two configurations of an internal veterinary fixation device: Results of in vitro mechanical testing using a bone substitute.

E. Schneider, J. Auer, A. Steiner, 2002, Veterinary surgery : VS.

Osteosynthesis of supracondylar humerus fractures in children: a biomechanical comparison of four techniques.

E. Schneider, C. Castellani, A. Weinberg, 2007, Clinical biomechanics.

„Cutting out“ bei pertrochantären Frakturen – ein Problem der Osteoporose?

F. Bonnaire, A. Weber, K. Schwieger, 2007, Der Unfallchirurg.

["Cutting out" in pertrochanteric fractures--problem of osteoporosis?].

F. Bonnaire, A. Weber, K. Schwieger, 2007, Der Unfallchirurg.

Aspects of internal fixation of fractures in porotic bone. Principles, technologies and procedures using locked plate screws.

E. Schneider, K. Schwieger, S. Perren, 2005, Acta chirurgiae orthopaedicae et traumatologiae Cechoslovaca.

Three-dimensional distribution of trabecular bone density and cortical thickness in the distal humerus.

Stefan Greiner, Gerd Diederichs, Berend Linke, 2009, Journal of shoulder and elbow surgery.

Assessment of bone quality in the proximal humerus by measurement of the contralateral site: a cadaveric analyze

J. Goldhahn, J. Korner, G. Diederichs, 2006, Archives of Orthopaedic and Trauma Surgery.

Range of Motion in Reconstruction Situations Following Corpectomy in the Lumbar Spine: A Question of Bone Mineral Density?

E. Schneider, G. Meyer, C. Lill, 2005, Spine.

Transverse fractures of the olecranon: a biomechanical comparison of three fixation techniques

P. Hoffmeyer, K. Schwieger, R. Stern, 2010, Archives of Orthopaedic and Trauma Surgery.

The LCP-concept in the operative treatment of distal humerus fractures--biological, biomechanical and surgical aspects.

E. Schneider, P. Rommens, L. Müller, 2003, Injury.

Pullout strength of anterior spinal instrumentation: a product comparison of seven screws in calf vertebral bodies

Rüdiger Krauspe, Erich Schneider, Dieter Wahl, 2007, European Spine Journal.

Osseointegration of hollow cylinder based spinal implants in normal and osteoporotic vertebrae: a sheep study

J. Goldhahn, E. Schneider, M. Aebi, 2006, Archives of Orthopaedic and Trauma Surgery.

Influence of Preload in Flexibility Testing of Native and Instrumented Lumbar Spine Specimens

E. Schneider, G. Meyer, S. Knöller, 2003 .

A new method of pre-clinical spine implant testing in six degrees of freedom-based on the hexapod principle

Erich Schneider, B. Linke, Kay Sellenschloh, 1998 .

Mechanical comparison of 3 different clamp and 2 different rod types of a new veterinary internal fixation system, 4.5/5.5-mm VetFix.

A. Steiner, B. Linke, J. Auer, 2003, Veterinary surgery : VS.

Influence of Screw Positioning in a New Anterior Spine Fixator on Implant Loosening in Osteoporotic Vertebrae

M. Reinhold, M. Blauth, K. Schwieger, 2006, Spine.

Biomechanical Analysis of Transpedicular Screw Fixation in the Subaxial Cervical Spine

E. Schneider, W. Rüther, R. Kothe, 2004, Spine.

Treatment strategies for proximal femur fractures in osteoporotic patients

F. Bonnaire, A. Weber, C. Lill, 2005, Osteoporosis International.

Intermethod Comparison and Evaluation of Measured Near Surface Residual Stress in Milled Aluminum

J. Aurich, M. R. Hill, B. Kirsch, 2021, Experimental Mechanics.

Biomechanical testing of different osteosynthesis systems for segmental resection of the mandible.

R. Gutwald, B. Linke, M. Arzdorf, 2007, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.

Development of a mechanical testing system for a mandibular distraction wound.

M. Troulis, B. Rahn, D. Perrott, 2003, International journal of oral and maxillofacial surgery.