A. Silva

发表

Performance of a PEMFC system integrated with a biogas chemical looping reforming processor: A theoretical analysis and comparison with other fuel processors (steam reforming, partial oxidation and auto-thermal reforming)

Iduvirges Lourdes Muller, I. L. Muller, Luis Frederico Pinheiro Dick, 2012 .

Oxide incorporation into Ni-based solid oxide fuel cell anodes for enhanced sulfur tolerance during operation on hydrogen or biogas fuels: A comprehensive thermodynamic study

A. Silva, N. C. Heck, 2015 .

EFFICIENT ENERGETIC UTILIZATION OF GLYCEROL– STEADY STATE MODELING OF HYBRID SOLID OXIDE FUEL CELL (SOFC) AND GAS TURBINE (GT) SYSTEM*

A. Silva, 2018 .

Operation of solid oxide fuel cells on glycerol fuel: A thermodynamic analysis using the Gibbs free energy minimization approach

I. L. Muller, A. Silva, 2010 .

Biohydrogen production from dairy industry wastewater in an anaerobic fluidized-bed reactor

I. Sakamoto, M. Varesche, M. Damianovic, 2019, Biomass and Bioenergy.

Effect of High Energy Milling Time of the Aluminum Bronze Alloy Obtained by Powder Metallurgy with Niobium Carbide Addition

A. Silva, G. Rodrigues, M. Melo, 2017 .

Mechanical Properties Analysis of Al2024 alloy Submitted to Different Aging Time and different Cold Plastic Deformation degree

M. L. Siqueira, A. Silva, G. Rodrigues, 2019, Materials Research.

Hydrogen production by sorption enhanced steam reforming of oxygenated hydrocarbons (ethanol, glycer

I. L. Muller, A. Silva, 2011 .

Thermodynamics of sulfur poisoning in solid oxide fuel cells revisited: The effect of H 2 S concentration, temperature, current density and fuel utilization

A. Silva, N. C. Heck, 2015 .

Thermodynamic analysis of ethanol steam reforming using Gibbs energy minimization method: A detailed study of the conditions of carbon deposition

Iduvirges Lourdes Muller, Célia de Fraga Malfatti, I. L. Muller, 2009 .

Cetane Number Assessment in Diesel Fuel by 1H or Hydrogen Nuclear Magnetic Resonance-Based Multivariate Calibration

A. Barison, A. Silva, N. Nagata, 2014 .

Study of soft magnetic iron cobalt based alloys processed by powder injection molding

P. Wendhausen, R. Machado, J. Lozano, 2008 .

Magnetic Properties Obtained for Fe-50Co Alloy Produced by MIM with Elemental Powders

P. Wendhausen, R. Machado, A. Silva, 2007 .

Study of Soft Magnetic Nickel-Iron Based Alloys Processed by Powder Injection Molding

P. Wendhausen, R. Machado, A. Silva, 2008 .

On the Use of Elemental Powders to Process Fe-50Co Alloys by Powder Injection Molding

P. Wendhausen, R. Machado, A. Silva, 2006 .

Towards H2-rich gas production from unmixed steam reforming of methane: Thermodynamic modeling

I. L. Muller, A. Silva, 2011 .

VISCOSITY PREDICTION OF C-A-S AND C-A-S-M-SLAG SYSTEMS BY MEANS OF AN ARTIFICIAL NEURAL NETWORK*

A. Silva, N. C. Heck, GuilhermeCarvalho Heck, 2018 .

Slag Splashing: simulation and analysis of the slags conditions

A. Silva, W. Lima, J. R. Oliveira, 2019, Journal of Materials Research and Technology.

Thermodynamic study on glycerol-fuelled intermediate-temperature solid oxide fuel cells (IT-SOFCs) with different electrolytes

I. L. Muller, A. Silva, 2010 .

Using static, kinetic and metal mobility procedures to evaluate possibilities of coal waste land disposal at Moatize Mine, Mozambique

I. Schneider, Jéssica Weiler, B. Firpo, 2020, REM - International Engineering Journal.

Processing of the Fe3Si Alloy from Prealloyed Powder Fe45Si by Metal Injection Molding

P. Wendhausen, R. Machado, A. Silva, 2008 .