Cing-Dao Kan

发表

Injury Risk Investigation of the Small, Rear-seat Occupant in Side Impact

Richard M. Morgan, Paul Scullion, Lilly Nix, 2012 .

Comparison of vehicle kinematics and occupant responses between Jordan rollover system and an over-the-road rollover

Cing-Dao Kan, Pradeep Mohan, Lingbo Yan, 2012 .

Versatility and Limitations of a Fully Detailed Finite Element Model of a 1997 Dodge Grand Caravan for Crashworthiness Applications

Cing-Dao Kan, Nabih E. Bedewi, Jesus Monclus-Gonzalez, 2000 .

Further Considerations for Effective Median Barrier Lateral Placement for Varying Highway Cross Sections

Cing-Dao Kan, Dhafer Marzougui, Kenneth S Opiela, 2014 .

Crashworthiness Evaluation Using Integrated Vehicle and Occupant Finite Element Models

Cing-Dao Kan, Dhafer Marzougui, George Bahouth, 2001 .

Extended Validation of the Finite Element Model for the 2007 Chevrolet Silverado Pick-Up Truck (MASH 2270kg Vehicle)

Lilly Nix, Cing-Dao Kan, Dhafer Marzougui, 2013 .

Safety Performance Evaluation of Concrete Barriers on Curved and Superelevated Roads

Cing-Dao Kan, Dhafer Marzougui, Kenneth S Opiela, 2012 .

Thermo-plastic effects on structural behaviour during crush and impact

Cing-Dao Kan, Yan Chen, A. Eskandarian, 2002 .

Automated design of threats and shields under hypervelocity impacts by using successive optimization methodology

Hasan Kurtaran, Cing-Dao Kan, Dhafer Marzougui, 2008 .

Extended Validation of the Finite Element Model for the 2010 Toyota Yaris Passenger Sedan (MASH 1100kg Vehicle)

Lilly Nix, Cing-Dao Kan, Dhafer Marzougui, 2013 .

Evaluation of Rail Height Effects of the Safety Performance of W-Beam Barriers

Cing-Dao Kan, Pradeep Mohan, Dhafer Marzougui, 2007 .

Analyzing the Effects of Cable Barriers Behind Curbs Using Computer Simulation

Cing-Dao Kan, Dhafer Marzougui, Kenneth S Opiela, 2009 .

Determination of the Ballistic Performance of a Cold-Rolled, Deep-Drawing Sheet Metal

Cing-Dao Kan, Dhafer Marzougui, Murat Buyuk, 2005 .

Development and validation of a vehicle suspension finite element model for use in crash simulations

Cing-Dao Kan, Dhafer Marzougui, Nabih E. Bedewi, 2004 .

Component and Full Scale Tests for Suspension Model Validation

Cing-Dao Kan, Pradeep Mohan, Dhafer Marzougui, 2009 .

Investigation of Vehicle Crash Pulse Severity Using Frontal New Car Assessment Program (NCAP) Test Data

Cing-Dao Kan, Eun-Young Kim, Chung-Kyu Park, 2013 .

Validation of a Toyota Camry Finite Element Model for Multiple Impact Configurations

Cing-Dao Kan, Pradeep Mohan, Dhafer Marzougui, 2016 .

Development of a New End Treatment for Steel-Backed Timber Guardrail: Phase I Conceptual Design

Cing-Dao Kan, Dhafer Marzougui, Kenneth S Opiela, 2009 .

Analyses of Vehicle Trajectories When Leaving the Traveled Way on Curved, Superelevated Road Sections

Cing-Dao Kan, Dhafer Marzougui, Kenneth S Opiela, 2015 .

Child safety analysis for forward-facing child restraint system in frontal impact

Cing-Dao Kan, Seong-Wook Hong, Hanil Bae, 2009 .

Investigation of Crashworthiness of Structural Composite Components in Vehicle Crash Test Simulations

Cing-Dao Kan, Chung-Kyu Park, William Thomas Hollowell, 2013 .

Development of Structural Countermeasures for NHTSA’s Oblique Impact

Cing-Dao Kan, Rudolf Reichert, 2018 .

Comparison of Crash Test and Simulation Results for Impact of Silverado Pickup into New Jersey Barrier under Manual for assessing Safety Hardware

Cing-Dao Kan, Dhafer Marzougui, Kenneth S Opiela, 2012 .

The Influence of Sub-Frame Geometry on a Vehicle’s Frontal Crash Response

Cing-Dao Kan, Robert Thomson, Chung-Kyu Park, 2009 .

Evaluation of crashworthiness of a carbon-fibre-reinforced polymer (CFRP) ladder frame in a body-on-frame vehicle

Cing-Dao Kan, Chung-Kyu Park, William Thomas Hollowell, 2014 .

Analyzing the Potential Interface Effectiveness for Cable Barriers in Elevated Median Cross Sections

Cing-Dao Kan, Dhafer Marzougui, Kenneth S Opiela, 2012 .

Assessment of a Dynamic Test Device to Evaluate Vehicle Rollover Safety

Cing-Dao Kan, Kennerly Digges, Fadi Tahan, 2013 .

Crashworthiness and Numerical Analysis of Composite Inserts in Vehicle Structure

Cing-Dao Kan, Chung-Kyu Park, Steven Reagan, 2012 .

Comparison of the Crash Test and Simulation of an Angle Impact of a 2007 Chevrolet Silverado Pick-Up Truck into a W-Beam Transition for MASH Conditions

Cing-Dao Kan, Dhafer Marzougui, Kenneth S Opiela, 2014 .

Effect of increase in weight and stiffness of vehicles on the safety of rear seat occupants

Cing-Dao Kan, Dhafer Marzougui, Kennerly Digges, 2011 .

A Study on Vehicle Crash Pulse Severity in Frontal NCAP Tests

Cing-Dao Kan, Chung-Kyu Park, C. Kan, 2016 .

Analysis of the Sensitivity of Bridge Rail Face Slope on Crashworthiness Performance

Cing-Dao Kan, Dhafer Marzougui, Kenneth S Opiela, 2015 .

Investigation of Opportunities for Lightweight Vehicles Using Advanced Plastics and Composites

Cing-Dao Kan, Chung-Kyu Park, William Thomas Hollowell, 2012 .

Modeling, Testing, and Validation of the 2007 Chevy Silverado Finite Element Model

Cing-Dao Kan, Pradeep Mohan, Dhafer Marzougui, 2010 .

Frontal pole impacts

Richard M. Morgan, Cing-Dao Kan, Dhafer Marzougui, 2012 .

Analyzing Effects of End-Anchor Spacing and Initial Tension on Cable Barrier Deflection Using Computer Simulation

Cing-Dao Kan, Dhafer Marzougui, Kenneth S Opiela, 2010 .

Evaluation of Car-to-Car Frontal Offset Impact Finite Element Models Using Full Scale Crash Data

Cing-Dao Kan, Nabih E. Bedewi, Carl Ragland, 1995 .

An Integrated Modeling Method to Evaluate Fleet Safety Performance of New Vehicle Designs

Cing-Dao Kan, Azim Eskandarian, Dhafer Marzougui, 2013 .

Hybrid III 5% 성인 여성 더미의 유한요소 모델 개발

이상일, 박경진, Cing-Dao Kan, 2010 .

Comparative analysis of a vehicle impacting a rigid barrier, an offset deformable barrier, and a rigid pole

Richard M. Morgan, Cing-Dao Kan, Pradeep Mohan, 2008 .

Injury Mechanism of the Head and Face of Children in Side Impacts

Richard M. Morgan, Lilly Nix, Cing-Dao Kan, 2009 .

DEVELOPMENT AND VALIDATION OF AN NCAP SIMULATION USING LS-DYNA3D

Cing-Dao Kan, Nabih E. Bedewi, 1996 .