S. Duchesne

发表

Eddy current influence on electromagnetic emissions of laminated cores

Daniel Roger, Ewa Napieralska-Juszczak, Stephane Duchesne, 2007 .

Effect of mineral charge with high relative permittivity in impregnation varnish on the life expectancy of electrical machines

G. Vélu, S. Duchesne, D. Cozonac, 2012, 2012 IEEE International Symposium on Electrical Insulation.

Modeling and Experimental Characterization of Nickel-Coated Copper Wires for the Design of Extremely High-Temperature Electrical Machines

G. Vélu, S. Duchesne, O. Ninet, 2020, IEEE Transactions on Magnetics.

High-power density induction machines with increased windings temperature

G. Vélu, Aïcha Laidoudi, S. Duchesne, 2020 .

A New Concept for Deeper Integration of Converters and Drives in Electrical Machines: Simulation and Experimental Investigations

Hossam Al Ghossini, S. Duchesne, T. Dang, 2019, Open Physics.

A simulation method to predict the turn-to-turn voltage spikes in a PWM fed motor winding

Vasile Mihaila, Stephane Duchesne, Daniel Roger, 2011, IEEE transactions on dielectrics and electrical insulation.

High temperature machine: Characterization of materials for the electrical insulation

K. Komeza, G. Vélu, J. Lecointe, 2020 .

An insulation solution for coils of high temperature motors (500°C)

D. Roger, D. Malec, S. Duchesne, 2016, 2016 IEEE International Conference on Dielectrics (ICD).

Voltage stress predetermination for long-life design of windings for electric actuators in aircrafts

D. Roger, S. Duchesne, V. Iosif, 2015, 2015 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP).

Materials characterization and geometry of a high temperature induction machine

G. Vélu, S. Duchesne, J. Lecointe, 2014, 2014 International Conference on Electrical Machines (ICEM).

Experimental characterization of the maximum turnto-turn voltage for inorganic high temperature motor

G. Vélu, D. Roger, S. Duchesne, 2014, 2014 IEEE Electrical Insulation Conference (EIC).

Determination of Partial Discharge Inception Voltage and Location of Partial Discharges by Means of Paschen’s Theory and FEM

P. Dular, M. Rossi, G. Parent, 2019, IEEE Transactions on Magnetics.

Predictive Diagnostic Based on HF Modeling of Electrical Machines Windings

Stéphane Duchesne, Guillaume Parent, Mustapha Toudji, 2019, 2019 IEEE International Electric Machines & Drives Conference (IEMDC).

Capacitive short circuit detection in transformer core laminations

Daniel Roger, Stephane Duchesne, D. Roger, 2008 .

High temperature motors: Investigations on the voltage distribution in windings at a short scale times for a PWM supply

Daniel Roger, Vadim Iosif, Stéphane Duchesne, 2017, 2017 IEEE International Electric Machines and Drives Conference (IEMDC).

Assessment and improvements of inorganic insulation for high temperature low voltage motors

Daniel Roger, Vadim Iosif, David Malec, 2016, IEEE Transactions on Dielectrics and Electrical Insulation.

Power density improvement of axial flux permanent magnet synchronous motor by using different magnetic materials

S. Duchesne, Vincent Mallard, A. Abdenour, 2023, COMPEL - The international journal for computation and mathematics in electrical and electronic engineering.

Increase the power-to-weight ratio of induction machines by increasing their operating temperature

N. Takorabet, Aïcha Laidoudi, S. Duchesne, 2019, 2019 19th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering (ISEF).

Is thermo-bonded coils a good solution for electric machines fed by fast PWM inverters?

D. Roger, S. Duchesne, J. Moeneclaey, 2014, 2014 IEEE Electrical Insulation Conference (EIC).

Assessment of Finite Element Simulation Methodologies for the Use of Paschen’s Law in the Prediction of Partial Discharge Risk in Electrical Windings

Guillaume Parent, THéo Mathurin, Stephane Duchesne, 2020, IEEE Access.

Experimental Method for Characterizing Electrical Steel Sheets in the Normal Direction

Jean-Philippe Lecointe, Ewa Napieralska, Thierry Belgrand, 2010, Sensors.