Y. Fukui

发表

Homogenization Analysis for Particulate Composite Materials using the Boundary Element Method

N. Kumazawa, H. Okada, Y. Fukui, 2004 .

Elastic Analysis for Thick-Walled Tubes of Functionally Graded Material Subjected to Internal Pressure

Y. Fukui, N. Yamanaka, 1992 .

Microstructures of functionally graded materials fabricated by centrifugal solid-particle andin-situ methods

I. Kim, Yoshimi Watanabe, Y. Fukui, 2005 .

Wear behavior of Al-Al3Ti composite manufactured by a centrifugal method

Yoshimi Watanabe, Y. Fukui, N. Yamanaka, 1999 .

The Stresses and Strains in a Thick-Walled Tube for Functionally Graded Material under Uniform Thermal Loading

Y. Fukui, N. Yamanaka, K. Wakashima, 1993 .

Evaluation of the Rheological Behavior of a Semi-Solid Al–SiC Composite using a Parallel-Plate Drop-Forge Viscometer

N. Kumazawa, Y. Fukui, D. Nara, 2014 .

Backward extrusion of Al–Al3Ti functionally graded material: Volume fraction gradient and anisotropic orientation of Al3Ti platelets

Yoshimi Watanabe, Y. Fukui, P. D. Sequeira, 2005 .

Near-net-shape forming of Al-Al3Ni functionally graded material over eutectic melting temperature

N. Kumazawa, H. Okada, Y. Fukui, 2000 .

Evaluation of the Deformation Behavior of a Semi-solid Hypereutectic Al-Si Alloy Compressed in a Drop-Forge Viscometer

N. Kumazawa, Y. Fukui, D. Nara, 2015, Metallurgical and Materials Transactions A.

Analyses of Progressive Damage and Fracture of Particulate Composite Materials Using s-FEM Technique

N. Kumazawa, Satoyuki Tanaka, H. Okada, 2006 .

Analysis of thermal residual stress in a thick-walled ring of duralcan-base Al-SiC functionally graded material

Yoshimi Watanabe, Y. Fukui, 1996 .

Fundamental Investigation of Functionally Gradient Material Manufacturing System using Centrifugal Force

Yasuyoshi Fukui, Y. Fukui, 1991 .

Manufacturing of Al-Al3Fe functionally graded material using the vacuum centrifugal method and measurements of its mechanical properties.

Yoshimi Watanabe, N. Kumazawa, H. Okada, 1999 .

Measurement of Young's modulus and internal friction of an in situ Al-Al3Ni functionally gradient material

C. Ponton, K. Takashima, Y. Fukui, 1994, Journal of Materials Science.

Bending strength of an AlAl3Ni functionally graded material

Y. Fukui, N. Yamanaka, Y. Enokida, 1997 .

Semi-Solid Forming of Al-Si Functionally Graded Material and Refinement of Si Particles

N. Kumazawa, Y. Fukui, D. Nara, 2012 .

Evaluation of particle size and shape distributions in Al-Al3Ni Functionally Graded Materials fabricated by a semi-solid forming process

I. Kim, Yoshimi Watanabe, K. Matsuda, 2010 .

Control of composition gradient in a metal-ceramic functionally graded material manufactured by the centrifugal method

Yoshimi Watanabe, Yasuyoshi Fukui, Yoshimi Watanabe, 1998 .

Crystallographic Dependence of Fatigue Crack Propagation in bcc Metals

Y. Higo, S. Nunomura, Y. Fukui, 1977 .

On the Transcrystal Fatigue Crack Propagation Mechanism of bcc Metals

S. Nunomura, Y. Fukui, 1977 .

Fabrication of in-situ Al-Al3Ni functionally graded material by centrifugal method.

Yoshimi Watanabe, Y. Fukui, N. Yamanaka, 1994 .

Fully automated mixed mode crack propagation analyses based on tetrahedral finite element and VCCM (virtual crack closure-integral method)

Hiroshi Kawai, Hiroshi Okada, Yasuyoshi Fukui, 2010 .

Numerical analysis on near net shape forming of Al–Al3Ni functionally graded material

N. Kumazawa, H. Okada, Y. Fukui, 2003 .

Fabrication of Magnetic Functionally Graded Material by Martensitic Transformation Technique

Yuzo Nakamura, Y. Fukui, Yoshimi Watanab, 1997 .

A magnetic-functionally graded material manufactured with deformation-induced martensitic transformation

K. Nakanishi, Y. Fukui, Y. Nakamura, 1993 .

Novel Concept to Detect an Optimum Thixoforming Condition of Al-Al3Ni Functionally Graded Material by Wavelet Analysis for Online Operation

Yasuyoshi Fukui, Noriyoshi Kumazawa, Daisaku Nara, 2011, Materials.

Fundamental investigation of functionally gradient material manufacturing system using centrifugal force.

Y. Fukui, 1990 .

Fabrication of aluminium based functionally graded materials by centrifugal method and their physical properties.

Yoshimi Watanabe, Y. Fukui, 1996 .

Novel Recycling System of Aluminum and Iron Wastes-in-situ Al-Al3Fe Functionally Graded Material Manufactured by a Centrifugal Method-

Yoshimi Watanabe, Y. Fukui, P. Kapranos, 2003 .

Characteristics of a near-net-shape formed Al–Al3Fe eco-functionally graded material produced over its eutectic melting temperature

Yoshimi Watanabe, K. Matsuda, Y. Fukui, 2006 .

Theoretical study on fabrication of functionally graded material with density gradient by a centrifugal solid-particle method

I. Kim, Yoshimi Watanabe, T. Ogawa, 2006 .

Homogenization method for heterogeneous material based on boundary element method

Hiroshi Okada, Yasuyoshi Fukui, Noriyoshi Kumazawa, 2001 .

Forming limit of sheet metal considering surface roughness.

K. Nakanishi, Y. Fukui, 1986 .

Wear Properties of Intermetallic Compound Reinforced Functionally Graded Materials Fabricated by Centrifugal Solid-particle and In-Situ Methods

Yoshimi Watanabe, Y. Fukui, H. Sato, 2008 .

Orientation of Al3Ti Platelets in Al-Al3Ti Functionally Graded Material Manufactured by Centrifugal Method

Yoshimi Watanabe, Y. Fukui, N. Yamanaka, 1997 .

Evaluation of Particle Size and Particle Shape Distributions in Al-Al3Ni FGMs Fabricated by a Centrifugal in-situ Method

Yoshimi Watanabe, K. Matsuda, Y. Fukui, 2004 .

320 Anisotropy of Wear Resistance in Al-Al_3Ti FGMs Fabricated by a Centrifugal Method

Yoshimi Watanabe, Y. Fukui, Hiroyuki Eryu, 2000 .

705 Analysis of Deformation Behavior of Semi-Solid Hypereutectic Al-Si Alloy Compressed in the Drop-Forge Viscometer

N. Kumazawa, T. Ando, Y. Fukui, 2012 .

Deformation of Semi-Solid Al-SiC Alloy Compressed in the Drop-Forge Viscometer

N. Kumazawa, Y. Fukui, Hiroki Kamibayashi, 2010 .

Characterization of Al3Fe Particle within Al-Al3Fe Functionally Graded Material Fabricated by Semi-Solid Forming

Yoshimi Watanabe, K. Matsuda, Y. Fukui, 2005 .

Three dimensional virtual crack closure-integral method (VCCM) with skewed and non-symmetric mesh arrangement at the crack front

Yasuyoshi Fukui, Noriyoshi Kumazawa, Hiroshi Okada, 2005 .

Fully Automated Mixed Mode Crack Propagation Analyses Using VCCM (Virtual Crack Closure-Integral Method) for Tetrahedral Finite Element

H. Kawai, H. Okada, Y. Fukui, 2011 .

Creation of the S-FEM analysis model using the digital section image

Yosuke Sakasegawa, Hiroshi Okada, Yasuyoshi Fukui, 2003 .