L. Zema

发表

Impact of needle-like crystals on wet and solid-lipid extrusion processes

P. Kleinebudde, A. Gazzaniga, G. Pretoro, 2012 .

Injection-molded capsular device for oral pulsatile release: development of a novel mold.

A. Gazzaniga, L. Zema, E. Macchi, 2013, Journal of pharmaceutical sciences.

Polymeric coatings for a multiple-unit pulsatile delivery system: preliminary study on free and applied films.

A. Gazzaniga, L. Zema, M. Cerea, 2013, International journal of pharmaceutics.

Evaluation of hot-melt extrusion technique in the preparation of HPC matrices for prolonged release.

A. Gazzaniga, L. Zema, G. Loreti, 2014, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

Modeling of drug release from partially coated matrices made of a high viscosity HPMC.

F. Giordano, A. Gazzaniga, M. Sangalli, 2004, International journal of pharmaceutics.

Film coatings for oral pulsatile release.

A. Gazzaniga, L. Zema, G. Loreti, 2013, International journal of pharmaceutics.

Optimisation and scale-up of a highly-loaded 5-ASA multi-particulate dosage form using a factorial approach.

S. L. Rough, D. I. Wilson, D. Wilson, 2012, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

The use of beta-cyclodextrin as a pelletization agent in the extrusion/spheronization process.

G. Bruni, F. Giordano, A. Gazzaniga, 1998, Drug development and industrial pharmacy.

3 D printing of medicinal products and the challenge of personalized therapy

A. Gazzaniga, L. Zema, A. Maroni, 2017 .

Evaluation of hot-melt extrusion and injection molding for continuous manufacturing of immediate-release tablets.

A. Gazzaniga, L. Zema, G. Loreti, 2015, Journal of pharmaceutical sciences.

Expandable drug delivery system for gastric retention based on shape memory polymers: Development via 4D printing and extrusion.

F. Auricchio, G. Scalet, F. Baldi, 2019, International journal of pharmaceutics.

Feasibility, stability and release performance of a time-dependent insulin delivery system intended for oral colon release.

A. Gazzaniga, M. Sangalli, L. Zema, 2009, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

A study on the release mechanism of drugs from hydrophilic partially coated perforated matrices.

A. Gazzaniga, M. Sangalli, L. Zema, 2003, Farmaco.

Influence of temperature and relative humidity conditions on the pan coating of hydroxypropyl cellulose molded capsules.

P. Pandey, A. Gazzaniga, L. Felton, 2016, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

What's next in the use of opacifiers for cosmetic coatings of solid dosage forms? Insights on current titanium dioxide alternatives.

A. Gazzaniga, L. Zema, M. Cerea, 2022, International journal of pharmaceutics.

Assessment of hot‐processability and performance of ethylcellulose‐based materials for injection‐molded prolonged‐release systems: An investigational approach

F. Baldi, A. Gazzaniga, F. Briatico-Vangosa, 2018, International journal of pharmaceutics.

Retentive drug delivery systems based on shape memory materials

A. Gazzaniga, L. Zema, A. Foppoli, 2020 .

In vitro and in vivo evaluation of an oral multiple-unit formulation for colonic delivery of insulin.

P. Caliceti, S. Salmaso, A. Gazzaniga, 2016, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

Gastroresistant capsular device prepared by injection molding.

A. Gazzaniga, L. Zema, G. Loreti, 2013, International journal of pharmaceutics.

Dry coating of solid dosage forms: an overview of processes and applications

A. Gazzaniga, L. Zema, M. Cerea, 2017, Drug development and industrial pharmacy.

Oral pulsatile drug delivery systems

M. Sangalli, L. Zema, M. Cerea, 2005, Expert opinion on drug delivery.

Administration strategies and smart devices for drug release in specific sites of the upper GI tract.

A. Gazzaniga, L. Zema, M. Cerea, 2022, Journal of controlled release : official journal of the Controlled Release Society.

Dehydration kinetics of theophylline-7-acetic acid monohydrate

A. Gazzaniga, M. Caira, M. Sangalli, 2010 .

Enteric coatings for colonic drug delivery: state of the art

A. Gazzaniga, L. Zema, A. Maroni, 2017, Expert opinion on drug delivery.

Coated pellets for oral colon delivery

A. Gazzaniga, L. Zema, M. Cerea, 2015 .

Film coatings for oral colon delivery.

A. Gazzaniga, L. Zema, A. Foppoli, 2013, International journal of pharmaceutics.

Expandable Drug Delivery Systems Based on Shape Memory Polymers: Impact of Film Coating on Mechanical Properties and Release and Recovery Performance

S. Pandini, A. Gazzaniga, F. Briatico-Vangosa, 2022, Pharmaceutics.

Development of Tailored Graphene Nanoparticles: Preparation, Sorting and Structure Assessment by Complementary Techniques

C. Bertarelli, L. Brambilla, C. Castiglioni, 2023, Molecules.

Oral colon delivery of insulin with the aid of functional adjuvants.

A. Gazzaniga, L. Zema, A. Foppoli, 2012, Advanced drug delivery reviews.

Oral pulsatile delivery: rationale and chronopharmaceutical formulations.

A. Gazzaniga, L. Zema, G. Loreti, 2010, International journal of pharmaceutics.

Time-controlled oral delivery systems for colon targeting

Andrea Gazzaniga, Maria Edvige Sangalli, Lucia Zema, 2006, Expert opinion on drug delivery.

In vitro and in vivo evaluation of an oral system for time and/or site-specific drug delivery.

F. Giordano, A. Gazzaniga, M. Sangalli, 2001, Journal of Controlled Release.

Solubility and conversion of carbamazepine polymorphs in supercritical carbon dioxide.

F. Giordano, A. Gazzaniga, L. Zema, 2001, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

Novel hydrophilic matrix system with non‐uniform drug distribution for zero‐order release kinetics

M. Bellini, A. Gazzaniga, L. Zema, 2018, Journal of controlled release : official journal of the Controlled Release Society.

Hot-melt extruded filaments based on pharmaceutical grade polymers for 3D printing by fused deposition modeling.

Federico Parietti, Andrea Gazzaniga, Alice Melocchi, 2016, International journal of pharmaceutics.

Erodible drug delivery systems for time-controlled release into the gastrointestinal tract

A. Gazzaniga, L. Zema, M. Cerea, 2016 .

Enteric-coating of pulsatile-release HPC capsules prepared by injection molding.

A. Gazzaniga, L. Felton, L. Zema, 2013, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

ERODIBLE DRUG DELIVERY SYSTEMS FOR TIME-CONTROLLED 1 RELEASE INTO THE GASTROINTESTINAL TRACT 2 3

A. Gazzaniga, L. Zema, M. Cerea, 2015 .

Erodible time-dependent colon delivery systems with improved efficiency in delaying the onset of drug release.

A. Gazzaniga, L. Zema, A. Foppoli, 2014, Journal of pharmaceutical sciences.

Thermal and structural properties of ambroxol polymorphs

F. Giordano, M. Caira, M. Sangalli, 2004 .

Three-Dimensional Printing of Medicinal Products and the Challenge of Personalized Therapy.

Andrea Gazzaniga, Alice Melocchi, Lucia Zema, 2017, Journal of pharmaceutical sciences.

3D printing by fused deposition modeling of single- and multi-compartment hollow systems for oral delivery - A review.

Andrea Gazzaniga, Alice Melocchi, Lucia Zema, 2020, International journal of pharmaceutics.

Different HPMC viscosity grades as coating agents for an oral time and/or site-controlled delivery system: a study on process parameters and in vitro performances.

F. Giordano, A. Gazzaniga, M. Sangalli, 2004, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

Retentive device for intravesical drug delivery based on water‐induced shape memory response of poly(vinyl alcohol): design concept and 4D printing feasibility

S. Pandini, A. Maroni, F. Baldi, 2019, International journal of pharmaceutics.

Extrusion-spheronisation of highly loaded 5-ASA multiparticulate dosage forms.

S. L. Rough, D. Wilson, A. Gazzaniga, 2010, International journal of pharmaceutics.

Insights into the Safety and Versatility of 4D Printed Intravesical Drug Delivery Systems

C. Moscheni, A. Gazzaniga, C. Perrotta, 2023, Pharmaceutics.

Intravesical drug delivery approaches for improved therapy of urinary bladder diseases

A. Gazzaniga, L. Zema, M. Cerea, 2021, International journal of pharmaceutics: X.

Dataset on a Small-Scale Film-Coating Process Developed for Self-Expanding 4D Printed Drug Delivery Devices

A. Gazzaniga, L. Zema, M. Cerea, 2021, Coatings.

Experimental and computational analysis of a pharmaceutical-grade shape memory polymer applied to the development of gastroretentive drug delivery systems.

F. Auricchio, G. Scalet, F. Baldi, 2021, Journal of the mechanical behavior of biomedical materials.

The Chronotopic™ System for Pulsatile and Colonic Delivery of Active Molecules in the Era of Precision Medicine: Feasibility by 3D Printing via Fused Deposition Modeling (FDM)

A. Gazzaniga, F. Briatico-Vangosa, L. Zema, 2021, Pharmaceutics.

Shape memory materials and 4D printing in pharmaceutics.

A. Gazzaniga, L. Zema, M. Cerea, 2021, Advanced drug delivery reviews.

Effect of Polyethylene Glycol Content and Molar Mass on Injection Molding of Hydroxypropyl Methylcellulose Acetate Succinate-Based Gastroresistant Capsular Devices for Oral Drug Delivery

A. Gazzaniga, F. Briatico-Vangosa, L. Zema, 2019, Polymers.

Newly designed punch for scored tablets: Evaluation by an expert system based on quality by design

Andrea Gazzaniga, Matteo Cerea, Alice Melocchi, 2021 .

Dry Coating of Soft Gelatin Capsules with HPMCAS

M. Sangalli, L. Zema, M. Cerea, 2008 .

Quality considerations on the pharmaceutical applications of fused deposition modeling 3D printing.

Andrea Gazzaniga, Alice Melocchi, Francesco Briatico-Vangosa, 2020, International journal of pharmaceutics.

A graphical review on the escalation of fused deposition modeling (FDM) 3D printing in the pharmaceutical field.

Andrea Gazzaniga, Alice Melocchi, Lucia Zema, 2020, Journal of pharmaceutical sciences.

3D printing by fused deposition modeling (FDM) of a swellable/erodible capsular device for oral pulsatile release of drugs

Federico Parietti, Andrea Gazzaniga, Lucia Zema, 2015 .

Lego-inspired capsular devices for the development of personalized dietary supplements: proof of concept with multimodal release of caffeine.

A. Gazzaniga, L. Zema, M. Cerea, 2020, Journal of pharmaceutical sciences.

AAPS PharmSciTech Industrial development of a 3D printed nutraceutical delivery platform in the form of a multicompartment HPC capsule

--Manuscript Draft, A. Gazzaniga, S. Maccagnan, 2018 .

3D printed multi‐compartment capsular devices for two‐pulse oral drug delivery

A. Gazzaniga, L. Zema, A. Foppoli, 2017, Journal of controlled release : official journal of the Controlled Release Society.

Rheological Characterization of Ethylcellulose-Based Melts for Pharmaceutical Applications

F. Baldi, F. Bignotti, F. Briatico-Vangosa, 2017, AAPS PharmSciTech.

Injection Molding and its application to drug delivery.

Andrea Gazzaniga, Alice Melocchi, Lucia Zema, 2012, Journal of controlled release : official journal of the Controlled Release Society.

A Novel Injection-Molded Capsular Device for Oral Pulsatile Delivery Based on Swellable/Erodible Polymers

Andrea Gazzaniga, Matteo Cerea, Lucia Zema, 2011, AAPS PharmSciTech.

Oral colon-specific drug delivery: Design strategies

Andrea Gazzaniga, Maria Edvige Sangalli, Ferdinando Giordano, 1994 .

Oral hydrophilic matrices having non uniform drug distribution for zero-order release: A literature review.

A. Gazzaniga, L. Zema, M. Cerea, 2020, Journal of controlled release : official journal of the Controlled Release Society.

Injection Molded Capsules for Colon Delivery Combining Time-Controlled and Enzyme-Triggered Approaches

J. Siepmann, C. Neut, F. Siepmann, 2020, International Journal of Molecular Sciences.

Different HPMC viscosity grades as coating agents for an oral time and/or site-controlled delivery system: an investigation into the mechanisms governing drug release.

A. Gazzaniga, M. Sangalli, L. Zema, 2007, Journal of pharmaceutical sciences.

In Vitro and Human Pharmacoscintigraphic Evaluation of an Oral 5-ASA Delivery System for Colonic Release.

A. Gazzaniga, L. Zema, M. Cerea, 2019, International journal of pharmaceutics.

Oral colon delivery platform based on a novel combination approach: Design concept and preliminary evaluation

J. Siepmann, C. Neut, F. Siepmann, 2021, Journal of Drug Delivery Science and Technology.

The Use of ß-Cyclodextrin in the Manufacturing of Disintegrating Pellets with Improved Dissolution Performances

A. Gazzaniga, M. Sangalli, L. Zema, 2008, AAPS PharmSciTech.

Oral delivery system for two-pulse colonic release of protein drugs and protease inhibitor/absorption enhancer compounds.

A. Gazzaniga, M. Sangalli, L. Zema, 2011, Journal of pharmaceutical sciences.

Active packaging for topical cosmetic/drug products: a hot-melt extruded preservative delivery device.

A. Gazzaniga, M. Sangalli, L. Zema, 2010, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

Rotary tangential spray technique for aqueous film coating of indobufen pellets.

A. Gazzaniga, C. Vecchio, M. Sangalli, 1998, Drug development and industrial pharmacy.

Solid-state chemistry of ambroxol theophylline-7-acetate.

F. Giordano, A. Gazzaniga, M. Caira, 2007, Journal of pharmaceutical sciences.

Evaluation of powder-layering vs. spray-coating techniques in the manufacturing of a swellable/erodible pulsatile delivery system

A. Gazzaniga, L. Zema, M. Cerea, 2020, Drug development and industrial pharmacy.

Non-Uniform Drug Distribution Matrix System (NUDDMat) for Zero-Order Release of Drugs with Different Solubility.

A. Gazzaniga, L. Zema, M. Cerea, 2020, International journal of pharmaceutics.

Investigation on the use of fused deposition modeling for the production of IR dosage forms containing Timapiprant

A. Gazzaniga, L. Zema, A. Foppoli, 2022, International journal of pharmaceutics: X.

Printing by Fused Deposition Modeling of Capsular Devices for Oral Pulsatile Release Based on Swellable / Erodible Polymers

A. Gazzaniga, L. Zema, A. Maroni, 2015 .