A. Péntek

发表

Developing an anti-spastic orthosis for daily home-use of stroke patients using smart memory alloys and 3D printing technologies

P. Maróti, L. Tóth, Adam Schiffer, 2020 .

The Effect of Printing Parameters on Electrical Conductivity and Mechanical Properties of PLA and ABS Based Carbon Composites in Additive Manufacturing of Upper Limb Prosthetics

P. Maróti, Adam Schiffer, M. Nyitrai, 2020 .

Early Upper Paleolithic surface collections from loess-like sediments in the northern Carpathian Basin

G. Lengyel, A. Péntek, C. Zeeden, 2017, Quaternary International.

Vertical distribution of zooplankton in a shallow peatland pond: the limiting role of dissolved oxygen

Z. Horváth, A. Péntek, É. Ács, 2013 .

Origin and formation of Metabreccia in the Parkin Offset Dike, Sudbury impact structure, Canada

R. Grieve, G. Osinski, A. Péntek, 2020 .

Multi-stage hydrothermal processes involved in “low-sulfide” Cu(–Ni)–PGE mineralization in the footwall of the Sudbury Igneous Complex (Canada): Amy Lake PGE zone, East Range

Peter C. Jones, F. Molnár, D. Ames, 2013, Mineralium Deposita.

Partial melting and melt segregation in footwall units within the contact aureole of the Sudbury Igneous Complex (North and East Ranges, Sudbury structure), with implications for their relationship to footwall Cu–Ni–PGE mineralization

Peter C. Jones, F. Molnár, A. Péntek, 2011 .

EFFECT OF FOLIAR FERTILIZERS APPLICATIONS ON THE NECTAR PRODUCTION OF SUNFLOWER ( Heliathus Annuus L . ) AND ON THE FORAGING BEHAVIOUR OF HONEYBEES ( Apis Mellifera L . )

A. Péntek, C. Fazekas, 2019 .

Footwall-type Cu-Ni-PGE Mineralization in the Broken Hammer Area, Wisner Township, North Range, Sudbury Structure

Peter C. Jones, F. Molnár, A. Péntek, 2008 .

A state-of-the-art guide to the sterilization of thermoplastic polymers and resin materials used in the additive manufacturing of medical devices

P. Szabó, Krisztina Bánfai, J. Pongrácz, 2022, Materials & Design.

The Significance of Partial Melting Processes in Hydrothermal Low Sulfide Cu-Ni-PGE Mineralization Within the Footwall of the Sudbury Igneous Complex, Ontario, Canada

F. Molnár, A. Péntek, G. Tuba, 2013 .

Partial melting and melt segregation within the contact aureole of the Sudbury Igneous Complex (Ontario, Canada) and their significance in hydrothermal Cu-Ni-PGE mineralization of the footwall

A. Péntek, 2010 .

Agricultural stone implements from the Paria Basin (Oruro Department, Bolivia)

A. Péntek, J. Gyarmati, 2022, Archeometriai Műhely.

Wartime scars or reservoirs of biodiversity? The value of bomb crater ponds in aquatic conservation.

R. Ptáčník, A. Móra, Z. Horváth, 2017, Biological conservation.

TRIASSIC ADVANCED RIFTING RELATED AND JURASSIC OPHIOLITE-LIKE MAGMATIC ROCKS IN THE BÜKK UNIT, NE-HUNGARY - AN OVERVIEW

F. Molnár, Gabriella B. Kiss, A. Péntek, 2011 .

Metacommunity dynamics of amphibians in years with differing rainfall

Z. Horváth, A. Péntek, C. F. Vad, 2017, Aquatic Ecology.

Manufacturing a First Upper Molar Dental Forceps Using Continuous Fiber Reinforcement (CFR) Additive Manufacturing Technology with Carbon-Reinforced Polyamide

Bálint Nagy, P. Maróti, A. Péntek, 2021, Polymers.

Novel PLA-CaCO3 composites in additive manufacturing of upper limb casts and orthotics—A feasibility study

P. Varga, Luca Toth, D Lorinczy, 2019, Materials Research Express.

Detailed Thermal Characterization of Acrylonitrile Butadiene Styrene and Polylactic Acid Based Carbon Composites Used in Additive Manufacturing

P. Maróti, Adam Schiffer, M. Nyitrai, 2020, Polymers.

Magmatic fluid segregation and overprinting hydrothermal processes in gabbro pegmatites of the Neotethyan ophiolitic Szarvaskö Complex (Bükk Mountains, NE Hungary)

F. Molnár, A. Péntek, D. H. Watkinson, 2006 .

An Overview on Personal Protective Equipment (PPE) Fabricated with Additive Manufacturing Technologies in the Era of COVID-19 Pandemic

Szilard Rendeki, Balint Nagy, Matyas Bene, 2020, Polymers.

Wartime scars or reservoirs of biodiversity? The value of bomb crater ponds in aquatic conservation.

R. Ptáčník, A. Móra, Z. Horváth, 2017, Biological conservation.

Surface disinfection change the mechanical, structural and biological properties of flexible materials used for additive manufacturing of medical devices

E. Telek, Krisztina Bánfai, J. Pongrácz, 2024, Materials & Design.