Shih-Feng Tseng

发表

Aligning and measuring the curvature and thickness of high-precision lens

Kun-Huan Wu, Shenq-Tsong Chang, Ming-Ying Hsu, 2015, SPIE Optical Engineering + Applications.

Dual-photoresist complementary lithography technique for the formation of submicron patterns on sapphire substrates

Chun-Ming Chang, Shih-Feng Tseng, Chao-Te Lee, 2014 .

A novel absolute measurement for the low-frequency figure correction of aspheric surfaces

Shenq-Tsong Chang, Wei-Yao Hsu, Shih-Feng Tseng, 2015, International Conference on Optical and Photonic Engineering.

Process of opto-mechanical design and assembly for reflective mirror subsystem of lithographic projection lens

Shenq-Tsong Chang, Shih-Feng Tseng, Yu-Chuan Lin, 2017, Advanced Lithography.

Dual photoresist complimentary lithography technique produces sub-micro patterns on sapphire substrates

Chun-Ming Chang, Shih-Feng Tseng, Chao-Te Lee, 2014, Advanced Lithography.

Effects of UV laser milling parameters on the profile cutting of Gorilla glass substrates

Shih-Feng Tseng, Wen-Tse Hsiao, Chien-Kai Chung, 2016, 2016 IEEE International Conference on Industrial Technology (ICIT).

Cutting device for cutting of hard-brittle material

Shih-Feng Tseng, Wen-Hong Wu, Chien-Yao Huang, 2007 .

Low-Cost Vibration and Acceleration Sensors Module for the Drilling Processes Monitoring

Shih-Feng Tseng, Wen-Tse Hsiao, Kuo-Cheng Huang, 2019, 2019 IEEE Sensors Applications Symposium (SAS).

Parameters optimization of laser electrode patterning on ITO/glass using multi-performance characteristics analysis

Shih-Feng Tseng, Ming-Fei Chen, Wen-Tse Hsiao, 2016, 2016 IEEE International Conference on Industrial Technology (ICIT).

Design, fabrication, identification and test of a closed-loop moving magnetic scanning module for RGB laser projector

Shih-Feng Tseng, Ming-Fu Chen, Chien-Kai Chung, 2019, International Symposium on Precision Engineering Measurement and Instrumentation.

Investigation of Profile Cutting on Glass Plates Using a Pulsed UV Laser System

Shih-Feng Tseng, Wen-Tse Hsiao, Chien-Yao Huang, 2011, Int. J. Autom. Technol..

Surface Formation of Nano- / Micro- Structures on Titanium Alloy Composites using Picosecond Laser Scanning Technology

Shih-Feng Tseng, Yu-Hsuan Lin, Wen-Tse Hsiao, 2018, PHOTOPTICS.

Absolute measurement method for correction of low-spatial frequency surface figures of aspherics

Shenq-Tsong Chang, Wei-Yao Hsu, Shih-Feng Tseng, 2017 .

Development of textile-based triboelectric nanogenerators integrated with plastic metal electrodes for wearable devices

Shih-Feng Tseng, Rong-Tsong Lee, Yuang-Cherng Chiou, 2019, The International Journal of Advanced Manufacturing Technology.

Direct fabrication of nanofiber scaffolds in pillar-based microfluidic device by using electrospinning and picosecond laser pulses

Shih-Feng Tseng, Tien-Li Chang, S. Tseng, 2017 .

Laser scribing of indium tin oxide (ITO) thin films deposited on various substrates for touch panels

Shih-Feng Tseng, Ming-Fei Chen, Donyau Chiang, 2010 .

Characteristics of Ni–Ir and Pt–Ir hard coatings surface treated by pulsed Nd:YAG laser

Shih-Feng Tseng, Ming-Fei Chen, Chang-Pin Chou, 2010 .

Development of portable laser machining system for laser writing applications

Shih-Feng Tseng, Ming-Fei Chen, Wen-Tse Hsiao, 2013 .

Mechanical and optoelectric properties of post-annealed fluorine-doped tin oxide films by ultraviolet laser irradiation

Shih-Feng Tseng, Wen-Tse Hsiao, Donyau Chiang, 2011 .

Laser micromilling of convex microfluidic channels onto glassy carbon for glass molding dies

Shih-Feng Tseng, Ming-Fei Chen, Wen-Tse Hsiao, 2014 .

Development of a Novel Rapid Manufacturing Process for Micro-Cylindrical Lens Array

Shih-Feng Tseng, Chang-Pin Chou, C. Chou, 2011 .

Mechanical properties of Pt-Ir and Ni-Ir binary alloys for glass-molding dies coating.

Shih-Feng Tseng, Donyau Chiang, Chien-Yao Huang, 2011, Journal of nanoscience and nanotechnology.

The effect of laser patterning parameters on fluorine-doped tin oxide films deposited on glass substrates

Shih-Feng Tseng, Wen-Tse Hsiao, Donyau Chiang, 2011 .

Glass biochip fabrication by laser micromachining and glass-molding process

Shih-Feng Tseng, Wen-Tse Hsiao, Chien-Yao Huang, 2012 .

Optimized laser cutting on light guide plates using grey relational analysis

Shih-Feng Tseng, Ming-Fei Chen, S. Tseng, 2011 .

Temperature profile of the multilayer structure irradiated by pulsed laser

Shih-Feng Tseng, Wen-Tse Hsiao, Donyau Chiang, 2013 .

Electrode patterning and annealing processes of aluminum-doped zinc oxide thin films using a UV laser system

Shih-Feng Tseng, Wen-Tse Hsiao, Donyau Chiang, 2013 .