Guangyao Meng

发表

Electrode performance and analysis of reversible solid oxide fuel cells with proton conducting electrolyte of BaCe0.5Zr0.3Y0.2O3−δ

Fei He, Shangfeng Yang, G. Meng, 2010 .

A high-performance ammonia-fueled SOFC based on a YSZ thin-film electrolyte

Jianjun Ma, Qianli Ma, Jianfeng Gao, 2007 .

Fabrication and characterization of low cost tubular mineral-based ceramic membranes for micro-filtration from natural zeolite

G. Meng, Xing-qin Liu, Yingchao Dong, 2006 .

Direct liquid methanol-fueled solid oxide fuel cell

Dehua Dong, Mingfei Liu, Jianfeng Gao, 2008 .

YSZ-based SOFC with modified electrode/electrolyte interfaces for operating at temperature lower than 650 °C

Dehua Dong, Mingfei Liu, Jianfeng Gao, 2008 .

Effect of NiO/YSZ compositions on the co-sintering process of anode-supported fuel cell

Qibing Chang, G. Meng, Guangyao Meng, 2005 .

High sintering ability and electrical conductivity of Zn doped La(Ca)CrO3 based interconnect ceramics for SOFCs

Ling Zhao, Dehua Dong, Mingfei Liu, 2008 .

Electrostatic Spray Assembly of Nanostructured La0.7Ca0.3CrO3 − δ Films

Yan Yu, Yan Yu, Wenping Sun, 2007 .

Preparation of LiMO2 (M = Co, Ni) cathode materials for intermediate temperature fuel cells by sol-gel processes

Shanwen Tao, G. Meng, S. Tao, 1999 .

Intermediate-temperature proton-conducting fuel cells — Present experience and future opportunities

Bin Zhu, Bengt-Erik Mellander, G. Meng, 1999 .

An anode-supported micro-tubular solid oxide fuel cell with redox stable composite cathode

Bin Lin, Yihan Ling, G. Meng, 2010 .