Zhenguo Yang

发表

Combining the converse humidity/resistance response behaviors of rGO films for flexible logic devices

Tushar Kanti Bera, Gilles Lubineau, Yanlong Tai, 2017 .

Toward Flexible Wireless Pressure‐Sensing Device via Ionic Hydrogel Microsphere for Continuously Mapping Human‐Skin Signals

Yanlong Tai, Zhenguo Yang, 2017 .

Fabrication of paper-based conductive patterns for flexible electronics by direct-writing

Yanlong Tai, Yanlong Tai, Zhen-Guo Yang, 2011 .

Synthesis and Crystallization Behavior of Acetal Copolymer/Silica Nanocomposite by In Situ Cationic Ring-Opening Copolymerization of Trioxane and 1,3-Dioxolane

Zhenguo Yang, Xiao-hui Li, Lan Sun, 2008 .

Effect of Magnesium on the Austenite Grain Growth of the Heat-Affected Zone in Low-Carbon High-Strength Steels

Zhenguo Yang, K. Zhu, 2011 .

Effect of Mg Addition on Inhibiting Austenite Grain Growth in Heat Affected Zones of Ti-Bearing Low Carbon Steels

Jian Yang, Zhenguo Yang, K. Zhu, 2011 .

Effect of Mg Addition on the Ferrite Grain Boundaries Misorientation in HAZ of Low Carbon Steels

Zhenguo Yang, K. Zhu, 2011 .

Green approach to prepare silver nanoink with potentially high conductivity for printed electronics

Yanlong Tai, Zhenguo Yang, Zhimin Chai, 2011 .

Preparation and characterization of printable solder resist inks based on hyperbranched polyester

Chao Yang, Yu Chang, Zhenguo Yang, 2015 .

Preparation of stable aqueous conductive ink with silver nanoflakes and its application on paper‐based flexible electronics

Yanlong Tai, Zhenguo Yang, 2012 .

A promising approach to conductive patterns with high efficiency for flexible electronics

Yanlong Tai, Yanlong Tai, Zhenguo Yang, 2011 .

Preparation, characterization and reaction mechanism of a novel silver-organic conductive ink

Yu Chang, Yanlong Tai, Zhenguo Yang, 2012 .

Tensile and tribological properties of PTFE and nanoparticles modified epoxy-based polyester fabric composites

Zhenguo Yang, Xiao-hui Li, Lan Sun, 2008 .

Mechanical and tribological properties of polyoxymethylene modified with nanoparticles and solid lubricants

Zhenguo Yang, Xiao-hui Li, Lan Sun, 2008 .

Pulverized polyurethane foam particles reinforced rigid polyurethane foam and phenolic foam

Chao Yang, Zhenguo Yang, Z. Zhuang, 2014 .

Preparation and characterization of colloidal carbon sphere/rigid polyurethane foam composites

Zhenguo Yang, Z. Zhuang, 2009 .

Synthesis of submicrometer HfB2 powder and its densification

Guo‐Jun Zhang, Weiming Guo, Zhenguo Yang, 2012 .

Pressureless Sintering of Zirconium Diboride Ceramics with Boron Additive

Guo‐Jun Zhang, Weiming Guo, Zhenguo Yang, 2012 .

Self-propagating high-temperature reductive synthesis of TiB2-Al2O3 composite powders

Zhiqiang Yu, Zhenguo Yang, 2007 .

Microstructural evolution of ZrB2–MoSi2 composites during heat treatment

Guo‐Jun Zhang, Weiming Guo, Zhenguo Yang, 2011 .

High-temperature deformation of ZrB2 ceramics with WC additive in four-point bending

Guo‐Jun Zhang, Weiming Guo, Zhenguo Yang, 2011 .

Effect of high temperature heat treatment on ZrB2–SiC composites added with Yb2O3

Guo‐Jun Zhang, Weiming Guo, Zhenguo Yang, 2013 .

Comparison of ZrB2–SiC ceramics with Yb2O3 additive prepared by hot pressing and spark plasma sintering

Guo‐Jun Zhang, Weiming Guo, Zhenguo Yang, 2011 .

Effect of Carbon Impurities on Hot‐Pressed ZrB2–SiC Ceramics

Guo‐Jun Zhang, Weiming Guo, Zhenguo Yang, 2011 .

Effect of pressure loading cycle on spark plasma sintered ZrB2–SiC–Yb2O3 ceramics

J. Vleugels, Guo‐Jun Zhang, Weiming Guo, 2012 .

Failure analysis of bursting on the inner pipe of a jacketed pipe in a tubular heat exchanger

Yi Gong, Y. Gong, Jing Zhong, 2010 .

Effect of CTBN Concentration on Thermal and Morphological Properties of Binary Copolymers of o-Cresol Novolac Epoxy Resin and Bismaleimide

Zhenguo Yang, Xiao-Wei Tian, 2011 .

Numerical Simulation Study on Failure of Graphite Heat Exchanger with Orifice Block

Liang Dong, Zhenguo Yang, Chongyang Liu, 2021 .

Study on performance change of phenolic resin impregnated graphite in acid environment

Liang Dong, Zhenguo Yang, Jinsha Xu, 2021 .

Failure case study on porous block impregnated graphite heat exchanger

Liang Dong, Zhenguo Yang, Chongyang Liu, 2021 .

Effect of Surface Functional Modification of Nano-Alumina Particles on Thermal and Mechanical Properties of Epoxy Nanocomposites

H. Baier, S. You, Zhenguo Yang, 2011 .

Ortho-Substituted Ortho-Cresol Novolac Resins as an Epoxy Resin Curing Agent

Zhenguo Yang, Xiao-Wei Tian, 2012 .

Controlled synthesis of ortho-substitution ortho-cresol novolac resins

Chuang Jiang, Zhenguo Yang, Zheng Ji, 2009, 2009 International Conference on Electronic Packaging Technology & High Density Packaging.

Preparation and characterization of Si3N4/SBR nanocomposites with high performance

R. Xia, J. Qian, Yuchuan Zhang, 2012 .

Study on the friction and wear behavior of POM/Al2O3 nanocomposites

Zhenguo Yang, Xiao-hui Li, Lan Sun, 2008 .

Preparation, characterization, and modeling of carbon nanofiber/epoxy nanocomposites

Z. Ounaies, Xin-Lin Gao, Zhenguo Yang, 2011 .

Study on the mechanical properties of hybrid reinforced rigid polyurethane composite foam

Jian-Hua Wang, Bin Zhao, Zhenguo Yang, 2004 .

Influence of filler morphology on percolation threshold of isotropical conductive adhesives (ICA)

Haiping Wu, Yanping Xia, G. Tao, 2012 .

Influence of filler morphology on percolation threshold of isotropical conductive adhesives (ICA)

Yanping Xia, G. Tao, Zhenguo Yang, 2011, Science China Technological Sciences.

Twisting patterning: electrochemical deposition of stretchable spiral metallic conductors on elastic polymer threads

Tingrui Pan, Yu Chang, Yu Chang, 2018 .

Light‐Activated Rapid‐Response Polyvinylidene‐Fluoride‐Based Flexible Films

G. Lubineau, Yanlong Tai, Zhenguo Yang, 2016, Advanced materials.

Self‐healing Ag/epoxy electrically conductive adhesive using encapsulated epoxy‐amine healing chemistry

Yu Chang, Zhenguo Yang, Y. Tao, 2015 .

Self-healing isotropical conductive adhesives filled with Ag nanowires

Haiping Wu, Yu Chang, Zhenguo Yang, 2014 .

High-reproducibility, flexible conductive patterns fabricated with silver nanowire by drop or fit-to-flow method

Zhenguo Yang, Yanlong Tai, Biaobing Wang, 2013, Nanoscale Research Letters.

Synthesis, morphology, and melting behavior of poly(ether ether ketone) of different molecular weights

Xiaohui Li, Zhenguo Yang, Qian Lu, 2009 .

Synthesis of low viscosity, fast UV curing solder resist based on epoxy resin for ink‐jet printing

Chao Yang, Chao Yang, Zhen-Guo Yang, 2013 .

Leveraging a temperature-tunable, scale-like microstructure to produce multimodal, supersensitive sensors.

Gilles Lubineau, Zhenguo Yang, Yanlong Tai, 2017, Nanoscale.

Optimization on the thermal and tensile influencing factors of polyurethane-based polyester fabric composites

Zhenguo Yang, Xiao-hui Li, Lan Sun, 2010 .

Flexible pressure sensing film based on ultra-sensitive SWCNT/PDMS spheres for monitoring human pulse signals.

Yanlong Tai, Zhenguo Yang, 2015, Journal of materials chemistry. B.

Effects of the treatment of attapulgite and filler contents on tensile properties of PTFE and attapulgite reinforced fabric composites

Zhenguo Yang, Xiao-hui Li, Lan Sun, 2009 .