B. Ahmad

发表

Analysis of tribological behavior of medical-grade UHMW polyethylene under dry and lubricated conditions with human body fluids using Taguchi and GRA techniques

O. Hussain, B. Ahmad, S. Saleem, 2020, Journal of Thermoplastic Composite Materials.

Friction and wear performance evaluation of UHMWPE using Taguchi based grey approach: A study on the influence of load and bio-serum lubrication

S. S. Saleem, O. Hussain, B. Ahmad, 2020 .

Melting Phenomenon in a Squeezed Rheology of Reactive Rate Type Fluid

S. Rehman, M. Farooq, M. Rizwan, 2020, Frontiers in Physics.

In-situ preparation of PSSA functionalized ZWP/sulfonated PVDF composite electrolyte as proton exchange membrane for DMFC applications

B. Ahmad, F. Mir, Diyan ul Imaan, 2022, International Journal of Hydrogen Energy.

Proton exchange membrane based on poly (vinyl alcohol) as support and alpha alumina as filler and its performance in direct methanol fuel cell

B. Ahmad, F. Mir, Diyan ul Imaan, 2021 .

Chemically reactive hydromagnetic flow of a second-grade fluid in a semi-porous channel

Z. Abbas, B. Ahmad, S. Ali, 2015 .

Increase in Equilibrium Price by Fast Oscillations

B. Ahmad, Khalid Iqbal Mahr, 2014 .

Aspects of entropy generation for the non-similar three-dimensional bioconvection flow of nanofluids

D. Lu, S. Munir, U. Farooq, 2020 .

Decision letter for "Fabrication and tribological behavior of novel UHMWPE/vitamin-C/graphene nanoplatelets based hybrid composite for joint replacement"

O. Hussain, B. Ahmad, Shahid Saleem Sheikh, 2021, Industrial Lubrication and Tribology.

Open Loop Control Methods in Non-Linear Dynamical Equations

B. Ahmad, 2009 .

Stabilization of Kapitza oscillator by symmetric periodical forces

B. Ahmad, 2010 .

Editorial Advisory Board Design, Development and Calibration of Virtual System for Relative Humidity Measurement Fabricating Capacitive Micromachined Ultrasonic Transducers with Wafer Bonding Technique Remote Measurement of Electric Current Using Magneto-optic Technique Design and Implementation of

Yun, Andrew, Clive, 2022 .

Synthesis and characterization of a novel poly (vinyl alcohol)-based zinc oxide (PVA-ZnO) composite proton exchange membrane for DMFC

B. Ahmad, F. Mir, Diyan ul Imaan, 2020 .

Fabrication and characterization of poly (vinyl alcohol) – graphene nanoplatelets (GNPs) proton exchange membrane for direct methanol fuel cells

B. Ahmad, F. Mir, Diyan ul Imaan, 2020 .

Implant materials for knee and hip joint replacement: A review from the tribological perspective

O. Hussain, B. Ahmad, S. Saleem, 2019, IOP Conference Series: Materials Science and Engineering.

Surface moderation and composite fabrication of die-cast magnesium alloys via friction stir processing: a review

B. Ahmad, Suhail Ahmed, Manroo, Vinayak Malik, 2021, Advances in Materials and Processing Technologies.

Development of Nano-Composites on Rare-Earth Mg-ZE41 Alloy Via Friction Stir Processing (FSP): Microstructure, Mechanical, and Tribological Properties

Noor Zaman Khan, B. Ahmad, S. Manroo, 2022, JOM.

Study on surface modification and fabrication of surface composites of magnesium alloys by friction stir processing: a review

Noor Zaman Khan, B. Ahmad, S. Manroo, 2022, Journal of Engineering and Applied Science.

Study on surface modification and fabrication of surface composites of magnesium alloys by FSP (FSP): a review

Noor Zaman Khan, B. Ahmad, S. Manroo, 2022 .

Fabrication and machinability study of Zn-Al-TiC composite using wire EDM with different dielectric media

Noor Zaman Khan, A. N. Siddiquee, Tariq Ahmad, 2022, Advances in Materials and Processing Technologies.

Effect of process parameters on surface composite fabrication of newly commercialized Mg-ZE41 alloy by friction stir processing (FSP): microstructural development and microhardness

Vinayak R. Malik, Noor Zaman Khan, B. Ahmad, 2022, World Journal of Engineering.

Investigation of high temperature corrosion resistance of Ni25Cr coated and bare 347H SS in actual husk fired boiler atmosphere

D. Mudgal, B. Ahmad, S. Parvez, 2020 .

Nano-mechanical and nano-tribological characterization of Ni-Co-BN nano-composite coating for bearing applications.

S. S. Saleem, B. Ahmad, Shahid Manzoor Wani, 2023, Tribology International.

OPEN-LOOP CONTROL OF QUANTUM PARTICLE MOTION: EFFECTIVE SPLITTING IN MOMENTUM SPACE

Saifullah, B. Ahmad, Y. Rozhdestvensky, 2007, quant-ph/0703149.

Recent Advances in Machining of Composites and Super Alloys by Using Wire-EDM. A Review

Noor Zaman Khan, Tariq Ahmad, B. Ahmad, 2021, Recent Advances in Manufacturing, Automation, Design and Energy Technologies.

Analytical Evaluation of Squeeze Film Forces in a CMUT With Sealed Air-Filled Cavity

R. Pratap, R. Pratap, B. Ahmad, 2011, IEEE Sensors Journal.

Study of Entropy Generation with Multi-Slip Effects in MHD Unsteady Flow of Viscous Fluid Past an Exponentially Stretching Surface

Babar Ahmad, A. S. Butt, Sajjad Haider, 2020, Symmetry.

Mathematical analysis of a non-Newtonian polymer in the forward roll coating process

M. A. Rana, A. S. Awan, M. Zahid, 2020 .

MHD Three-Dimensional Free Convective Flow with Periodic Permeability and Heat Transfer of a Second-Grade Fluid

M. A. Rana, B. Ahmad, M. Hussan, 2021, Mathematical Problems in Engineering.

Effect of counter-face material on the tribological characteristics of UHMW polyethylene under synovial fluid lubrication

M. F. Wani, O. Hussain, B. Ahmad, 2019, Materials Today: Proceedings.

Elasto-Electrostatic Analysis of Circular Microplates Used in Capacitive Micromachined Ultrasonic Transducers

Rudra Pratap, Babar Ahmad, R. Pratap, 2010, IEEE Sensors Journal.

The effect of evacuated backside cavity on the dynamic characteristics of a capacitive micromachined ultrasonic transducer

R. Pratap, B. Ahmad, 2010 .

Entropy generation effects in MHD Casson nanofluid past a permeable stretching surface

A. S. Butt, K. Maqbool, S. M. Imran, 2020, International Journal of Exergy.

Mechanical, wear, and corrosion properties investigation of ZE41/TiB2 surface composites fabricated by friction stir processing

Noor Zaman Khan, B. Ahmad, S. Manroo, 2022, Journal of Manufacturing Science and Engineering.

Biotribological performance of medical-grade UHMW polyethylene-based hybrid composite for joint replacement

O. Hussain, B. Ahmad, Shahid Saleem Sheikh, 2021, Polymers and Polymer Composites.

Tribological performance of biomedical grade UHMWPE/nano-Al2O3/Vitamin-C hybrid composite for cartilage replacements

O. Hussain, B. Ahmad, S. Saleem, 2021 .

Analysis of thermally stratified flow of Sutterby nanofluid with zero mass flux condition

Saif-ur-Rehman, M. Farooq, F. Ahmad, 2020 .

Time-delayed dual-rate haptic rendering: stability analysis and reduced order modeling

Majid H. Koul, Babar Ahmad, Suhail Ganiny, 2021, International Journal of Intelligent Robotics and Applications.

Inverse Numerical Iterative Technique for Finding all Roots of Nonlinear Equations with Engineering Applications

Nazir Ahmad Mir, Babar Ahmad, Mudassir Shams, 2021, Journal of Mathematics.

On Computer Implementation for Comparison of Inverse Numerical Schemes for Non-Linear Equations

Nazir Ahmad Mir, Babar Ahmad, Masood ur Rehman Kayani, 2021, Comput. Syst. Sci. Eng..

Fabrication and tribological behavior of novel UHMWPE/vitamin-C/graphene nanoplatelets based hybrid composite for joint replacement

O. Hussain, B. Ahmad, Shahid Saleem Sheikh, 2021, Industrial Lubrication and Tribology.

Boundary Layer Flow through Darcy-Brinkman Porous Medium in the Presence of Slip Effects and Porous Dissipation

Mustafa Mamat, Abid Hussanan, Muhammad Salman Kausar, 2019, Symmetry.

Control of effective potential minima for Kapitza oscillator by periodical kicking pulses

B. Ahmad, S. Borisenok, 2009 .