M. Cabaleiro

发表

Metallic Industrial Structures. As-built and Structural Calculation

B. Riveiro, P. Arias, M. Cabaleiro, 2016 .

Combination of laser scanner and drilling resistance tests to measure geometry change for structural assessment of timber beams exposed to fire

M. Cabaleiro, J. Branco, C. Suñer, 2021 .

Filamentary actuation on the surface of bodies contoured by high-speed flows

G. Artana, M. Cabaleiro, G. DiPrimio, 2006 .

A case study of measurements of deformations due to different loads in pieces less than 1 m from lidar data

B. Riveiro, B. Conde, M. Cabaleiro, 2020 .

First Results of the Application of Infrared Thermography to the Crack Inspection in Wooden Beams

I. Garrido, M. Cabaleiro, M. Gallego, 2022, World Congress on Civil, Structural, and Environmental Engineering.

Use of BIM in rehabilitation and assessment of the built heritage: from the visible to the intangible

M. Cabaleiro, H. Sousa, C. Sguazzo, 2019, IABSE Symposium, Guimarães 2019: Towards a Resilient Built Environment Risk and Asset Management.

A holistic methodology for the non-destructive experimental characterization and reliability-based structural assessment of historical steel bridges

B. Riveiro, B. Conde, M. Cabaleiro, 2022, Engineering Structures.

Numerical model updating of an aging steel bridge based on a multidisciplinary experimental campaign

B. Riveiro, B. Conde, M. Cabaleiro, 2022, IABSE Symposium, Prague 2022: Challenges for Existing and Oncoming Structures.

Algorithm for the analysis of the geometric properties of cross-sections of timber beams with lack of material from LIDAR data

B. Riveiro, P. Arias, M. Cabaleiro, 2015, Materials and Structures.

Semi-automatic 3D frame modelling of wooden trusses using indoor point clouds

P. Arias, S. Lagüela, M. Cabaleiro, 2023, Structures.

First results on the combination of laser scanner and drilling resistance tests for the assessment of the geometrical condition of irregular cross-sections of timber beams

Manuel Cabaleiro, B. Conde, Hélder S. Sousa, 2018, Materials and Structures.

Reliability-based structural assessment of historical masonry arch bridges: the case study of Cernadela bridge

B. Conde, J. Matos, M. Cabaleiro, 2023, Case Studies in Construction Materials.

First results of a methodology to obtain a 1D variable geometry model for the structural analysis of corroded steel beams from the point cloud

B. Riveiro, B. Conde, M. Cabaleiro, 2021 .

Structural health control of historical steel structures using HBIM

B. Riveiro, B. Conde, M. Cabaleiro, 2022, Automation in Construction.

Automated Inspection of Railway Tunnels' Power Line Using LiDAR Point Clouds

Manuel Cabaleiro, Mario Soilán, Ana Sánchez-Rodríguez, 2019, Remote. Sens..

Apparent and resistant section parametric modelling of timber structures in HBIM

M. Cabaleiro, J. Branco, H. Sousa, 2022, Journal of Building Engineering.

Algorithm for automatic detection and analysis of cracks in timber beams from LiDAR data

Pedro Arias, W. F. Gard, J.W.G. van de Kuilen, 2017 .

Deterministic and probabilistic-based model updating of aging steel bridges

B. Riveiro, B. Conde, M. Cabaleiro, 2023, Structures.

HBIM Application in Historic Timber Structures: A Systematic Review

M. Cabaleiro, J. Branco, H. Sousa, 2022, International Journal of Architectural Heritage.

HBIM for storing life-cycle data regarding decay and damage in existing timber structures

Manuel Cabaleiro, Hélder S. Sousa, Jorge M. Branco, 2020 .

Analysis and storage of the decay degree level, cracks and lack of material in timber built heritage for HBIM

Manuel Cabaleiro, Hélder S. Sousa, Jorge M. Branco, 2019 .

Algorithm for beam deformation modeling from LiDAR data

Pedro Arias, Manuel Cabaleiro, Belén Riveiro, 2015 .

Automatic 3D modelling of metal frame connections from LiDAR data for structural engineering purposes

Pedro Arias, Manuel Cabaleiro, Belén Riveiro, 2014 .

Algorithm for the analysis of deformations and stresses due to torsion in a metal beam from LIDAR data

Pedro Arias, Manuel Cabaleiro, Belén Riveiro, 2016 .

Reliability-based structural assessment of a historical steel railway bridge

Manuel Cabaleiro, Belén Riveiro, Borja Conde, 2021, IABSE Congress, Ghent 2021: Structural Engineering for Future Societal Needs.

AUTOMATED CALIBRATION OF FEM MODELS USING LIDAR POINT CLOUDS

Manuel Cabaleiro, Belén Riveiro, B. Conde, 2018, The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences.

Parameterization of Structural Faults in Large Historical Constructions for Further Structural Modelling Thanks to Laser Scanning Technology and Computer Vision Algorithms

Paulo B. Lourenço, Ana M. Sánchez, I. Puente, 2019, RILEM Bookseries.

Design and testing of a decision tree algorithm for early failure detection in steel truss bridges

B. Riveiro, B. Conde, M. Cabaleiro, 2023, Engineering Structures.

Multi-objective optimization-based model calibration of masonry bridges

B. Riveiro, B. Conde, M. Cabaleiro, 2023, Case Studies in Construction Materials.

Analysis of Stiffness of Clamped Joints versus Bolted Joints in Steel Structures by Means of Accelerometers and Shaking Table Tests

Manuel Cabaleiro, Carlos Moutinho, Cristina González-Gaya, 2021, Sensors.

Remote Sens

Diego González-Aguilera, Manuel Cabaleiro, Alberto Villarino, 2015 .

Removable, Reconfigurable, and Sustainable Steel Structures: A State-of-the-Art Review of Clamp-Based Steel Connections

C. González-Gaya, B. Conde, M. Cabaleiro, 2023, Sustainability.