Kenji Yoshida

发表

Reduction of the BPF Noise Radiated from an Engine Cooling Fan

Itsuhei Kohri, Yoshihiro Kato, Kenji Yoshida, 2014 .

Virtual lithography system to improve the productivity of high-mix low-volume production

Eiji Yamanaka, Shoji Mimotogi, Takashi Sato, 2007, Photomask Japan.

Proceedings of the 2000 Asia and South Pacific Design Automation Conference

Kenji Yoshida, 2000 .

Introduction to “Pauling File (the Basic Database for Alloys, Intermetallics and Inorganics) ”

Ying Chen, Kenji Yoshida, Naoko Tatara, 2002 .

Supersonic Flight Testing of Unmanned Experimental Airplane for Next-generation SST

Shigeru Machida, Takeshi Ohnuki, Kenji Yoshida, 2007 .

The semiconductor integrated circuits

Osamu Ichikawa, Kenji Yoshida, 1969 .

WARP DESIGN OF A SUPERSONIC WING USING A NONLINEAR OPTIMIZATION METHOD

Kenji Yoshida, Yoshikazu Makino, Zhong Lei, 2004 .

Development of Integrated Retrieval System for Material Databases

Kenji Yoshida, Tadaaki Mashimo, 2005 .

Nonaxisymmetrical Fuselage Shape Modification for Drag Reduction of Low-Sonic-Boom Airplane

Masayoshi Noguchi, Kenji Yoshida, Yoshikazu Makino, 2003 .

An m-derived ladder high-pass SAW filter

Shusou Wadaka, Koji Murai, Tsutomu Nagatsuka, 2005 .

9.6 A 150MHz Graphics Rendering Processor with 256Mb Embedded DRAM

Tadashi Matsumoto, Katsuhiko Sato, Hidetaka Magoshi, 2001 .

Development of central?scotoma simulator and its applicability to basic studies

Yoshinobu Maeda, Michio Miyakawa, Kenji Yoshida, 2007 .

The science objectives for CALET

Kenji Yoshida, 2011 .

Supersonic drag reduction technology in the scaled supersonic experimental airplane project by JAXA

Kenji Yoshida, Kenji Yoshida, 2009 .

Balloon-borne electron telescope with scintillating fibers

Tadashi Kobayashi, Takamasa Yamagami, Kenji Yoshida, 1996, Optics & Photonics.

Study on Velocity Characteristics and Mechanics of Paper Feeding with Rubber-Covered Roller Drive.

Kenji Yoshida, Noriaki Okamoto, Kazuhiro Ohtani, 2001 .

AERODYNAMIC DESIGN OF UNMANNED AND SCALED SUPERSONIC EXPERIMENTAL AIRPLANE IN JAPAN

Kenji Yoshida, Yoshikazu Makino, Y. Makino, 2004 .

Force Measurement of Laparoscopic Instrument Tip during Dissection Procedure

Osamu Oshiro, Yoshihiro Kuroda, Kenji Yoshida, 2014 .

MODEL TESTS AND FEM SIMULATION OF SOME FACTORS AFFECTING THE BEARING CAPACITY OF A FOOTING ON SAND

Kazuo Tani, Fumio Tatsuoka, Kenji Yoshida, 2001 .

A Study on Recognition and Visualization of Batting Swing Patterns

Tadashi Horiuchi, Keisuke Hayashi, Kenji Yoshida, 2015 .

Proper Orthogonal Decomposition Analysis of Flow Structures Generated around Engine Cooling Fan

Itsuhei Kohri, Yuji Kobayashi, Hideaki Nagano, 2014 .

Study on MAX-MIN Ant System with Random Selection in Quadratic Assignment Problem

Ken Ishibashi, Ichiro Iimura, Shigeru Nakayama, 2009 .

Scanner fleet management utilizing programmed hotspot patterns

Eiji Yamanaka, Hiroyuki Morinaga, Soichi Inoue, 2008, Photomask Japan.

Patterning strategy and performance of 1.3NA tool for 32nm node lithography

Soichi Inoue, Shoji Mimotogi, Masafumi Asano, 2008, SPIE Advanced Lithography.

Detailed numerical simulation on development of end-gas auto-ignition

Kenji Yoshida, Yoji Shibutani, Shuntaro Yokoi, 2017 .

A data mining approach to recognizing source classes for unassociated gamma-ray sources

Kenji Yoshida, 2015 .

Between Design and Manufacturing of IC

Kenji Yoshida, 2003 .

Non-Axisymmetrical Fuselage Shape Modification for Drag Reduction of a Low Sonic-Boom Airplane

Masayoshi Noguchi, Kenji Yoshida, Yoshikazu Makino, 2003 .

Hot spot management with die-to-database wafer inspection system

Soichi Inoue, Kohji Hashimoto, Satoshi Usui, 2008, SPIE Advanced Lithography.

Stability Characteristics of Supersonic Natural Laminar Flow Wing Design Concept

Kenji Yoshida, Yoshine Ueda, Yuki Ide, 2012 .

Fundamental Study on Aerodynamic Configuration of Second Generation SST-Two Examples Based on KHI Aerodynamic Research.

Kenji Yoshida, 1994 .

Procedure input / output of information using a dot pattern.

Kenji Yoshida, 2003 .

CorrigendumCorrigendum to “Fatigue of headed studs welded with improved ferrules under rotating shear force” [J Constr Steel Res 92 (2014) 211–218]

Shigeyuki Matsui, Kenji Yoshida, Hiroshi Higashiyama, 2014 .

Multi-scale speed of sound analysis by comparing of histological image and ultrasonic microscopic images at multiple frequencies

Hideaki Haneishi, Takashi Ohnishi, Takuya Ogawa, 2019, Other Conferences.

Research on Drag Reduction in Hydraulic System of Construction Machines

Kenji Yoshida, Kenji Yoshida, 2013 .

Application of computer aided mechanism analysis to reduction of vibration of the sewing machines

Kenji Yoshida, Ikuya Takeda, Masaaki Taguchi, 2000 .

Research on Low Sonic Boom Technology.

Kenji Yoshida, Ayano Yamamoto, 1995 .

Frequency-domain multiplexing of TES microcalorimeter array with CABBAGE

Ryuichi Fujimoto, Yoshitaka Ishisaki, Yoh Takei, 2004 .

Balloon Borne Experiment with CALET Prototype

Kenji Yoshida, Yosui Akaike, Shoji Torii, 2009 .

Atmospheric gammmaray observation with the BETS detector for calibrating atmospheric neutrino flux

Takamasa Yamagami, Kenji Yoshida, Shoji Torii, 2002 .

The Diamond Compton Recoil Telescope

Kenji Yoshida, Hisashi Kitamura, S. Okuno, 2003 .

Fabrication of multi-pixel TES microcalorimeters with an electrodeposited Sn absorber and Bi absorber

Ryuichi Fujimoto, Yoshitaka Ishisaki, Tetsuya Osaka, 2004 .

CALET Mission for the Observation of Cosmic Rays on the International Space Station

Gabriele Bigongiari, Riccardo Zei, Kazutaka Yamaoka, 2009 .

Performance analyses of TES microcalorimeters with mushroom shaped X-ray absorbers made of Sn or Bi

Ryuichi Fujimoto, Yoshitaka Ishisaki, Tetsuya Osaka, 2004 .

The CALET, CALorimetric Electron Telescope, mission for the International Space Station

Takamasa Yamagami, Yukio Uchihori, Masahiro Takayanagi, 2002 .

Evaluation of 256-pixel TES microcalorimeter arrays with electrodeposited Bi absorbers

Ryuichi Fujimoto, Yoshitaka Ishisaki, Yoh Takei, 2006 .