Sandro Campos Amico

发表

The Optimal Match of Streams for Maximum Heat Transfer from a Gas Fired Absorption Refrigeration Unit

Marcus Vinicius Alves Pereira, Pe J. V. C. Vargas, Sandro Campos Amico, 2010 .

Investigation to Appraise the Abrasive Water Jet Response of Curaua/Basalt Hybrid Polyester Composites

J. T. Winowlin Jappes, Sandro Campos Amico, Siva Irulappasamy, 2019, Int. J. Manuf. Mater. Mech. Eng..

Stacking sequence optimization in composite tubes under internal pressure based on genetic algorithm accounting for progressive damage

Volnei Tita, José Humberto S. Almeida, Sandro Campos Amico, 2017 .

Effect of starch treatment and hybridisation on the mechanical properties of natural fibre composites

J. T. Winowlin Jappes, Sandro Campos Amico, Siva Irulappasamy, 2017, Int. J. Comput. Aided Eng. Technol..

A NUMERICAL METHODOLOGY FOR PERMEABILITY DETERMINATION OF REINFORCEMENTS FOR POLYMERIC COMPOSITES

Elizaldo Domingues dos Santos, Liércio André Isoldi, Sandro Campos Amico, 2012 .

Metallic and composite cables: a brief review

Carlos Alberto Cimini, Sandro Campos Amico, Eduardo A. W. De Menezes, 2018, Int. J. Comput. Aided Eng. Technol..

USE OF MECH-GCOMP ACADEMIC SOFTWARE FOR THE TEACHING OF PARTICULAR COMPOSITES

Alisson Aguiar Muller, Clarissa Coussirat Angrizani, Eduardo Antonio Wink de Menezes, 2017 .

Composite materials for mooring applications: Manufacturing, material characterization, and design

Eduardo Antonio Wink de Menezes, Sandro Campos Amico, Rogério J. Marczak, 2019, Marine Composites.

The Optimal Shape for a Unit PEM Fuel Cell

Adrian Bejan, Sandro Campos Amico, Juan C. Ordonez, 2005 .

Modeling, simulation and optimization of a beer pasteurization tunnel

Sandro Campos Amico, Juan C. Ordonez, Jose V. C. Vargas, 2006 .

Fibre loading effects on dynamic mechanical properties of compression moulded luffa fibre polyester composites

J. T. Winowlin Jappes, Xiao-Zhi Gao, Sandro Campos Amico, 2018, Int. J. Comput. Aided Eng. Technol..

The 3rd Brazilian Conference on Composite Materials - BCCM3

Sandro Campos Amico, Sérgio Henrique Pezzin, 2017 .

A two‐dimensional model for simulation, control, and optimization of FCC risers

W. P. Martignoni, Sandro Campos Amico, Jeferson Avila Souza, 2006 .

Hybrid composites: experimental and analytical assessment aided by online software

Eduardo Antonio Wink de Menezes, Sandro Campos Amico, Mário J. Kunz Filho, 2018 .

Composite structural behaviour prediction with the surrogate model and trace-based approach

Sandro Campos Amico, Rogério J. Marczak, Eduardo Gerhardt, 2018 .

Determination of a recyclability index for the PET glycolysis

Sandro Campos Amico, C. A. Ferreira, S. Amico, 2009 .

Mathematical modelling of capillary micro-flow through woven fabrics

Sandro Campos Amico, Constantina Lekakou, C. Lekakou, 2000 .

Resin Transfer Molding Process: Fundamentals, Numerical Computation and Experiments

Enivaldo Santos Barbosa, Sandro Campos Amico, Jeferson Avila Souza, 2012 .

Damage and failure in carbon/epoxy filament wound composite tubes under external pressure: Experimental and numerical approaches

Volnei Tita, José Humberto S. Almeida, Sandro Campos Amico, 2016 .

Carbon fiber-reinforced epoxy filament-wound composite laminates exposed to hygrothermal conditioning

José Humberto S. Almeida, Sandro Campos Amico, Edson Cocchieri Botelho, 2016, Journal of Materials Science.

Load sharing ability of the liner in type III composite pressure vessels under internal pressure

José Humberto S. Almeida, Sandro Campos Amico, António Marques, 2014 .

Glass fiber hybrid composites molded by RTM using a dispersion of carbon nanotubes/clay in epoxy

Sandro Campos Amico, Laís Vasconcelos da Silva, S. Amico, 2013 .

Influence of fiber content on the mechanical and dynamic mechanical properties of glass/ramie polymer composites

Sandro Campos Amico, S. Amico, A. J. Zattera, 2013 .

An experimental study of the permeability and capillary pressure in resin-transfer moulding

Sandro Campos Amico, Constantina Lekakou, C. Lekakou, 2001 .

Axial Impregnation of a Fiber Bundle. Part 2: Theoretical Analysis

Sandro Campos Amico, Constantina Lekakou, C. Lekakou, 2002 .

Buckling and post-buckling of filament wound composite tubes under axial compression: Linear, nonlinear, damage and experimental analyses

Volnei Tita, José Humberto S. Almeida, Sandro Campos Amico, 2018, Composites Part B: Engineering.

Sponge Gourd (Luffa Cylindrica) Reinforced Polyester Composites: Preparation and Properties

Sandro Campos Amico, K. G. Satyanarayana, K. Satyanarayana, 2014 .

The effect of post-consumer PET particles on the performance of flexible polyurethane foams

Sandro Campos Amico, Sérgio Henrique Pezzin, S. Amico, 2009 .

Damage modeling for carbon fiber/epoxy filament wound composite tubes under radial compression

Volnei Tita, José Humberto S. Almeida, Sandro Campos Amico, 2017 .

Microwave dewaxing applied to the investment casting process

J. A. Spim, Sandro Campos Amico, Fábio José Bento Brum, 2009 .

A geometric approach for filament winding pattern generation and study of the influence of the slippage coefficient

Rogério José Marczak, Sandro Campos Amico, Tales de Vargas Lisbôa, 2019 .

Experimental development of an intelligent refrigeration system

Sandro Campos Amico, J. A. R. Parise, Jose V. C. Vargas, 2005 .