J. Ecker

Effects of the infill pattern on mechanical properties of fused layer modeling (FLM) 3D printed wood/polylactic acid (PLA) composites

A. Haider, A. Petutschnigg, S. Kain, 2019, European Journal of Wood and Wood Products.

Bending Properties of Lightweight Copper Specimens with Different Infill Patterns Produced by Material Extrusion Additive Manufacturing, Solvent Debinding and Sintering

J. Gonzalez-Gutierrez, C. Kukla, F. Arbeiter, 2021, Applied Sciences.

3D computed tomography as Quality Control Tool in Advanced Composite Manufacturing

A. Haider, C. Fürst, B. Plank, 2018 .

Mechanical properties and water absorption behaviour of PLA and PLA/wood composites prepared by 3D printing and injection moulding

A. Haider, S. Hild, I. Burzic, 2019, Rapid Prototyping Journal.

“Improving the impact strength of PLA and its blends with PHA in fused layer modelling ”

A. Haider, H. Rennhofer, S. Hild, 2019, Polymer Testing.

Additive Manufacturing of Steel and Copper Using Fused Layer Modelling: Material and Process Development

J. Gonzalez-Gutierrez, C. Gierl-Mayer, H. Danninger, 2019 .

3D - Material Extrusion - Printing with Biopolymers: A Review

Milan Kracalik, Andreas Haider, Josef Valentin Ecker, 2017 .

Effects of the infill pattern on mechanical properties of fused layer modeling (FLM) 3D printed wood/polylactic acid (PLA) composites

A. Haider, A. Petutschnigg, S. Kain, 2019, European Journal of Wood and Wood Products.