É. Martin

发表

Development of a Macroscopic Damage Model for Woven Ceramic Matrix Composites

J.-F. Maire, Eric Martin, Nicolas Carrère, 2011 .

Damage assessment of thin SiC/SiC composite plates subjected to quasi-static indentation loading

É. Martin, V. Herb, G. Couégnat, 2010 .

Finite Fracture Mechanics: A Useful Tool to Analyze Cracking Mechanisms in Composite Materials

D. Leguillon, N. Carrère, É. Martin, 2017 .

Assessment of crack-related problems in layered ceramics using the finite fracture mechanics and coupled stress-energy criterion

O. Ševeček, D. Leguillon, R. Bermejo, 2016 .

Application of the coupled stress-energy criterion to predict the fracture behaviour of layered ceramics designed with internal compressive stresses

O. Ševeček, D. Leguillon, R. Bermejo, 2015 .

A twofold strength and toughness criterion for the onset of free-edge shear delamination in angle-ply laminates

D. Leguillon, N. Carrère, É. Martin, 2010 .

An energy criterion for the initiation of interface failure ahead of a matrix crack in brittle matrix composites

D. Leguillon, É. Martin, C. Lacroix, 2002 .

A revisited criterion for crack deflection at an interface in a brittle bimaterial

D. Leguillon, É. Martin, C. Lacroix, 2001 .

Crack deflection by an interface – asymptotics of the residual thermal stresses

D. Leguillon, É. Martin, C. Lacroix, 2001 .

Design and finite element assessment of fully uncoupled multi-directional layups for delamination tests

D. Fanteria, A. Catapano, É. Martin, 2020, Journal of Composite Materials.

5277 - A CRITERION FOR INTERFACIAL DEBONDING IN THE VICINITY OF A MATRIX CRACK

D. Leguillon, S. Kourkoulis, É. Martin, 2013 .

Competition between deflection and penetration at an interface in the vicinity of a main crack

D. Leguillon, É. Martin, J. Gatt, 2008 .

Initiation of Fracture Mechanisms at the Fibre/Matrix Interface

D. Leguillon, É. Martin, B. Poitou, 2006 .

CFC/Cu bond damage in actively cooled plasma facing components

C. Henninger, F. Escourbiac, J. Schlosser, 2007 .

Performance assessment of the augmented finite element method for the modeling of weak discontinuities

É. Martin, G. Couégnat, Simon Essongue, 2020, International Journal for Numerical Methods in Engineering.

Prediction of interfacial debonding between stiff spherical particles and a soft matrix with the coupled criterion

A. Catapano, D. Leguillon, N. Carrère, 2020 .

PREDICTION OF CRACK DEFLECTION AND KINKING IN CERAMIC LAMINATES

D. Leguillon, É. Martin, O. Tazi, 2006 .

A finite fracture model for the analysis of multi-cracking in woven ceramic matrix composites

D. Leguillon, Jia Li, É. Martin, 2018 .

The influence of the interphase and associated interfaces on the deflection of matrix cracks in ceramic matrix composites

J. Lamon, N. Carrère, É. Martin, 2000 .

Comparison between cohesive zone models and a coupled criterion for prediction of edge debonding

D. Leguillon, É. Martin, T. Vandellos, 2014 .

Prediction of the surface cracking pattern of an oxidized polymer induced by residual and bending stresses

D. Leguillon, M. Lafarie-Frenot, Y. Pannier, 2016 .

Initiation of edge debonding: coupled criterion versus cohesive zone model

D. Leguillon, N. Carrère, É. Martin, 2016, International Journal of Fracture.

What is the tensile strength of a ceramic to be used in numerical models for predicting crack initiation?

O. Ševeček, D. Leguillon, R. Bermejo, 2018, International Journal of Fracture.

CRACK NUCLEATION AT STRESS CONCENTRATION POINTS IN COMPOSITE MATERIALS — APPLICATION TO CRACK DEFLECTION BY AN INTERFACE

D. Leguillon, É. Martin, 2013 .

Prediction of crack deflection in porous/dense ceramic laminates

T. Chartier, D. Leguillon, J. Besson, 2006 .

CRACK DEFLECTION IN CERAMIC LAMINATES

D. Leguillon, É. Martin, S. Tariolle, 2004 .

A New Approach to Simulate Interface Damage in Brittle Matrix Composites

S. Morel, J. Saliba, J. E. Yagoubi, 2016 .

A MULTISCALE DAMAGE MODEL FOR THE MECHANICAL BEHAVIOUR OF CERAMIC MATRIX COMPOSITE MATERIALS

É. Martin, G. Couégnat, A. Coradi, 2012 .

Damage modelling in plasma facing components

J. Schlosser, É. Martin, G. Chevet, 2009 .

Fracture behaviour of model silicon carbide filaments

S. Auvray, É. Martin, A. Faucon, 2001 .

An extension of the point-stress criterion based on a coupled stress and energy fulfilment: Application to the prediction of the open-hole tensile strength of a composite plate

D. Leguillon, N. Carrère, É. Martin, 2015 .

Metal Matrix Composites: Continuous Silicon-Carbide Fibers/Titanium-Alloy Matrix

N. Carrère, É. Martin, 2012 .

Longitudinal Creep Behaviour of a SiC/Ti-6242 Composite in a Vacuum Atmosphere

N. Carrère, É. Martin, A. Faucon, 2002 .

In situ fibre strength determination in metal matrix composites

Eric Martin, G. Rousset, Jacques Lamon, 2009 .

Conditions for matrix crack deflection at an interface in ceramic matrix composites

D. Leguillon, É. Martin, P. Peters, 1998 .

Basic creep behavior of concretes investigation of the physical mechanisms by using acoustic emission

Jean-Louis Tailhan, Eric Martin, Laurent Gaillet, 2012 .

Compressive, tensile and bending basic creep behaviours related to the same concrete

Jean-Louis Tailhan, Eric Martin, C. Boulay, 2013 .

The Effect of Interfacial Reactions on Residual Stress Fields within Composites

Eric Martin, K. Debray, J. M. Quenisset, 1999 .

Modelling of edge crack formation and propagation in ceramic laminates using the stress–energy coupled criterion

O. Ševeček, D. Leguillon, R. Bermejo, 2016 .

Understanding the edge crack phenomenon in ceramic laminates

D. Leguillon, R. Bermejo, M. Kotoul, 2015 .

The strengthening effect caused by an elastic contrast—part I: the bimaterial case

Eric Martin, Dominique Leguillon, D. Leguillon, 2012, International Journal of Fracture.

Prediction of multi-cracking in sub-micron films using the coupled criterion

D. Leguillon, É. Martin, 2017, International Journal of Fracture.

The influence of an interphase on the deflection of a matrix crack in a ceramic-matrix composite

D. Leguillon, É. Martin, C. Lacroix, 2002 .

Mechanical Characterization of Si–C(O) Fiber/SiC (CVI) Matrix Composites witrTa BN–Interphase

C. Labrugère, A. Guette, É. Martin, 1994 .

Comparison of shear strength tests on AV119 epoxy-joined carbon/carbon composites

Massimiliano Avalle, Eric Martin, Monica Ferraris, 2010 .

Damage analysis of thin 3D-woven SiC/SiC composite under low velocity impact loading

É. Martin, V. Herb, G. Couégnat, 2012 .

Understanding the tensile strength of ceramics in the presence of small critical flaws

O. Ševeček, D. Leguillon, R. Bermejo, 2018, Engineering Fracture Mechanics.

MODELLING AND IDENTIFICATION OF THE MECHANICAL BEHAVIOUR OF OXIDE/OXIDE CERAMIC MATRIX COMPOSITES

A. Jankowiak, É. Martin, M. Parlier, 2012 .

Interfacial zone design in titanium-matrix composites reinforced by SiC filaments

K. Debray, É. Martin, Y. Petitcorps, 1996 .

Flexural vs. tensile strength in brittle materials

D. Leguillon, M. Lafarie-Frenot, É. Martin, 2015 .

Thermoelastic constant determination of an interphase formed by a fibre-matrix interaction

K. Debray, É. Martin, J. Quenisset, 1996 .

Finite element modelling of traction-free cracks: Benchmarking the augmented finite element method (AFEM)

Eric Martin, Guillaume Couégnat, Simon Essongue, 2021, Engineering Fracture Mechanics.

Mechanical properties of SiC/SiC braided tubes for fuel cladding

E. Rohmer, É. Martin, C. Lorrette, 2014 .

Creep behaviour of a unidirectional SM1140+/Ti-6242 composite

N. Carrère, É. Martin, B. Coutand, 2003 .

Influence of porosity and fibre coating on engineering elastic moduli of fibre-reinforced ceramics (SiC/SiC)

É. Martin, P. Peters, P. Pluvinage, 1995 .

Numerical implementation of the coupled criterion for damaged materials

Jia Li, Dominique Leguillon, Eric Martin, 2019, International Journal of Solids and Structures.

Numerical implementation of the coupled criterion: Matched asymptotic and full finite element approaches

D. Leguillon, A. Doitrand, É. Martin, 2020, Finite Elements in Analysis and Design.

Macrocrack propagation in concrete specimens under sustained loading: Study of the physical mechanisms

P. Rossi, C. Boulay, J. Tailhan, 2014 .

Experimental assessment of Fully-Uncoupled Multi-Directional specimens for mode I delamination tests

D. Fanteria, A. Catapano, É. Martin, 2020 .

Prediction of crack initiation at blunt notches and cavities – size effects

Eric Martin, Dominique Leguillon, C. Putot, 2007 .

Computation of generalized stress intensity factors of 3D singularities

D. Leguillon, A. Doitrand, É. Martin, 2020, International Journal of Solids and Structures.

RECENT DEVELOPMENTS IN PROGRESSIVE COLLAPSE DESIGN

K. Marchand, D. Stevens, E. Williamson, 2013 .

Crack initiation at a V-notch—comparison between a brittle fracture criterion and the Dugdale cohesive model

Carole Henninger, Eric Martin, Dominique Leguillon, 2007 .

Comparison between models based on a coupled criterion for the prediction of the failure of adhesively bonded joints

Eric Martin, Nicolas Carrère, Dominique Leguillon, 2015 .

A coupled strength and toughness criterion for the prediction of the open hole tensile strength of a composite plate

D. Leguillon, N. Carrère, É. Martin, 2012 .

Microstructure and mechanical behaviour of a Nextel™610/alumina weak matrix composite subjected to tensile and compressive loadings

É. Martin, Y. Renollet, R. Valle, 2017 .

Edge cracking due to a compressive residual stress in ceramic laminates

O. Ševeček, D. Leguillon, R. Bermejo, 2015 .

Energetic conditions for interfacial failure in the vicinity of a matrix crack in brittle matrix composites

Eric Martin, Dominique Leguillon, D. Leguillon, 2004 .

Identification of the mechanical behaviour and damage mechanisms of a Nextel™610/alumina ceramic matrix composite subjected to tensile loading.

A. Jankowiak, É. Martin, R. Valle, 2015 .

Multi-cracking in brittle thin layers and coatings using a FFM model

D. Leguillon, Jia Li, É. Martin, 2017 .

A Finite Fracture Approach for Determining the Fracture Onset of a Brazed SiC Specimen

D. Leguillon, É. Martin, C. Lorrette, 2014 .

A Brazilian Disk Test for the Evaluation of the Shear Strength of Epoxy‐Joined Ceramics

Massimiliano Avalle, Eric Martin, Edgar Lara-Curzio, 2012 .

Theoretical study based on 2D assumptions of the influence of small pores on crack initiation in adhesively bonded joints

D. Leguillon, N. Carrère, A. Doitrand, 2021 .

A fast procedure to predict the notch strength with the coupled criterion

N. Carrère, É. Martin, 2023, Engineering Fracture Mechanics.

Strength prediction of bonded assemblies using a coupled criterion under elastic assumptions: effect of material and geometrical parameters

Eric Martin, Nicolas Carrère, Dominique Leguillon, 2013 .

An Integrated Virtual Material Approach for Ceramic Matrix Composites

G. Vignoles, C. Germain, W. Ros, 2012 .

Analysis of impact properties of 3D-carbon-carbon composite material by the instrumented charpy test

R. Naslain, É. Martin, J. Quenisset, 1986 .

Thermal Fatigue of Thermostructural Composites

É. Martin, J. Quenisset, J. Lartigau, 1996 .

3D Multiscale Modeling of the Mechanical Behavior of Woven Composite Materials

J. Lamon, É. Martin, G. Couégnat, 2010 .

Approche multiéchelle du comportement mécanique des matériaux composites à renfort tissé = Multiscale modelling of the mechanical behaviour of woven composite materials

J. Lamon, N. Carrère, É. Martin, 2009 .

Interface debonding ahead of a primary crack

Eric Martin, Dominique Leguillon, D. Leguillon, 2000 .

Characterization and damaging law of CFC for high heat flux actively cooled plasma facing components

F. Escourbiac, J. Schlosser, J. Boscary, 2011 .

Damage prediction of carbon fibre composite armoured actively cooled plasma-facing components under cycling heat loads

F. Escourbiac, J. Schlosser, M. Missirlian, 2009 .

Initiation and propagation of damage in actively cooled CFC armoured high heat flux components in fusion machines

F. Escourbiac, J. Schlosser, Eric Martin, 2009 .

Damage of actively cooled plasma facing components of magnetic confinement controlled fusion machines

J. Schlosser, É. Martin, V. Herb, 2009 .

The strengthening effect caused by an elastic contrast—part II: stratification by a thin stiff layer

Eric Martin, Dominique Leguillon, D. Leguillon, 2012, International Journal of Fracture.

Slip and Frictional Shear Stresses in Ceramic Matrix Composites

É. Martin, P. Peters, J. Quenisset, 1995 .

A NEW PUSH-OUT PROCEDURE FOR THE EVALUATION OF INTERFACIAL PROPERTIES OF SIC/SIC COMPOSITES

P. Weisbecker, É. Martin, S. Jouannigot, 2012 .