D. Gunderov

发表

Discovery of metastable tetragonal disordered phase upon phase transitions in the equiatomic nanostructured FePd alloy

G. S. Kandaurova, N. Shchegoleva, A. Popov, 2013 .

The microstructure and mechanical characteristics of the alloy Ti-50.7 at.%Ni with different deformation processing during multiple martensitic transformations

D. Gunderov, A. Churakova, 2020, IOP Conference Series: Materials Science and Engineering.

Effect of annealing on percolating porosity in ultrafine-grained copper produced by equal channel angular pressing

Y. Estrin, G. Wilde, G. Schmitz, 2013 .

Evolution of the Zr42.5Сu42.5Al10Fe5 amorphous alloy structure during the HPT process

E. Zanaeva, A. Bazlov, E. Ubyivovk, 2022, Journal of Non-Crystalline Solids.

Crystallization Kinetics on Melt Spun and HPT-Processed Zr62Cu22Al10Fe5Dy1 Metallic Glass

D. Gunderov, A. Srivastav, J. Bhatt, 2022, Metallurgical and Materials Transactions A.

The influence of multiple phase transformations on functional characteristics in TiNi alloys in various structural states

D. Gunderov, A. Churakova, E. Kayumova, 2021 .

Microstructure transformation and physical and mechanical properties of ultrafine‐grained and nanocrystalline TiNi alloys in multiple martensitic transformations B2‐B19’

S. Dmitriev, D. Gunderov, D. Gunderov, 2018, Materialwissenschaft und Werkstofftechnik.

Functional Characteristics and Phase Transformations in Bar Semiproducts from Shape Memory NiTi Alloys

V. Andreev, V. Kalashnikov, V. Shavrov, 2019, Metal Science and Heat Treatment.

Nanocrystallization Induced by Severe Plastic Deformation of Amorphous Alloys

R. Valiev, V. Pushin, A. P. Zhilyaev, 2004 .

Strain rate sensitivity and deformation activation volume of coarse-grained and ultrafine-grained TiNi alloys

A. Lukyanov, I. Sabirov, G. Raab, 2015 .

Mechanical Spectroscopy of High Pressure Torsion Deformed Fe-Based Alloys and Ti

I. Golovin, D. Gunderov, J. Ivanisenko, 2006 .

Evaluation of Advanced Aluminum Alloys for Use in New-Generation Wires

M. Murashkin, R. Sattarov, D. Gunderov, 2021, Power Technology and Engineering.

Effect of Deformation by High Pressure Torsion on the Phase Composition and Microhardness of Mechanically Alloyed and Rapidly Quenched Al–Fe Alloys

V. Stolyarov, V. Tcherdyntsev, D. Gunderov, 2003 .

Effect of annealing on the structure and phase composition of Cu-Al composite produced by conventional and accumulative HPT

N. Parkhimovich, D. Gunderov, V. Danilenko, 2022, Letters on Materials.

Mechanical Behavior and Stress-Induced Martensitic Transformation in Nanocrystalline Ti49.4Ni50.6 Alloy

R. Valiev, A. Lukyanov, V. Pushin, 2008 .

The increased stability of a coarse-grained and ultrafine-grained Ti49.15Ni50.85 shape memory alloy achieved with multiple martensitic transformations

D. Gunderov, D. Gunderov, A. Churakova, 2020, IOP Conference Series: Materials Science and Engineering.

Disordering and Ordering in a Severely Deformed FePd Alloy

X. Sauvage, C. Genevois, D. Blavette, 2011 .

Equal-Channel Angular Pressing, Microstructure and Hysteresis Properties of Ultrafine - Grained Pr20Fe73.5B5Cu1.5 - Alloy

V. Stolyarov, R. Valiev, E. V. Belozerov, 2001 .

Magnetic Properties of Ternary Fe–Ni–Ti Alloys After Severe Plastic Deformation

S. Taskaev, D. Gunderov, M. Ulyanov, 2020, IEEE Magnetics Letters.

Multiple Shear Bands in Zr-Based Bulk Metallic Glass Processed by Severe Plastic Deformation

R. Valiev, E. Ubyivovk, D. Gunderov, 2018, Defect and Diffusion Forum.

Atomic Force Microscopy Studies of Severely Deformed Amorphous TiNiCu Alloy

R. Valiev, A. Lukyanov, E. Ubyivovk, 2018 .

Structural properties of Fe49Ni49Ti2 alloy deformed by high pressure torsion

S. Taskaev, D. Gunderov, S. Shevyrtalov, 2021 .

Influence of Severe Plastic Deformation on Magnetic Properties of Fe 48 Ni 48 Zr 4 , Fe 49 . 5 Co 16 . 5 B 33 Ta and Co 80 Zr 16 B 4 Alloys

V. Khovaylo, S. Taskaev, K. Skokov, 2016 .

Influence of Severe Plastic Deformation on Magnetic Properties of Fe48Ni48Zr4, Fe49.5Co16.5B33Ta and Co80Zr16B4 Alloys☆

V. Khovaylo, S. Taskaev, K. Skokov, 2015 .

Some Slippage Issues in High-Pressure Torsion Using Cu and Ti Samples as an Example

D. Gunderov, R. Asfandiyarov, V. Titov, 2022, Materials.

Method for slippage evaluation at various stages of high-pressure torsion and its application to Fe-0.1 %C

G. Raab, D. Gunderov, A. Churakova, 2021, Letters on Materials.

Application of nanostructural nickel titanium implants with shape memory effect to modern dental practice

V. Kalashnikov, V. Shavrov, V. Koledov, 2009 .

Long-Length Ultrafine-Grained Titanium Rods Produced by ECAP-Conform

R. Valiev, Yuntian Zhu, A. Misra, 2008 .

Influence of the strain rate and deformation temperature on the deformability of Ti-Ni SMAs: A preliminary study

V. Brailovski, S. Prokoshkin, A. Kreitcberg, 2014 .

Slippage during High-Pressure Torsion: Accumulative High-Pressure Torsion—Overview of the Latest Results

D. Gunderov, R. Asfandiyarov, A. Sharafutdinov, 2023, Metals.

Martensitic phase transformation in NiTi bi-crystals with symmetric Ʃ25 twist and tilt grain boundaries

K. Zhou, V. Stolyarov, S. Dmitriev, 2018 .

Functional Fatigue of Ni–Mn–Ga and Ni–Ti Alloys with the Shape Memory Effect in Thermocycling Conditions under a Constant Stress

V. Andreev, V. Kalashnikov, V. Koledov, 2020 .

Phase Transformations and Functional Properties of NiTi Alloy with Ultrafine-Grained Structure

R. Valiev, G. Eggeler, J. Frenzel, 2010 .

Effect of Equal Channel Angular Pressing and Repeated Rolling on Structure, Phase Transformations and Properties of TiNi Shape Memory Alloys

R. Valiev, Yuntian Zhu, S. Prokoshkin, 2006 .

SPD-Induced Nanocrystallization of Shape Memory Ni2MnGa-Based and NiTi-Based Alloys Quenched from Liquid State

R. Valiev, A. Korolyov, V. Koledov, 2006 .

Metastable Nanostructured SPD Ti-Ni Alloys with Unique Properties

R. Valiev, V. Pushin, D. Gunderov, 2005 .

MICROSTRUCTURE TRANSFORMATION IN A CAST Cu-Fe ALLOY AT HIGH PRESSURE TORSION DEFORMATION

R. Valiev, A. Lukyanov, E. Antipov, 2016 .

Low Temperature Mechanical Properties of Different Commercial Purity Nanostructured Titanium Processed by ECA Pressing

R. Valiev, V. Bengus, E. Tabachnikova, 2006 .

Evolution of Microstructure and Mechanical Properties of Titanium Grade 4 with the Increase of the ECAP-Conform Passes

A. Polyakov, G. Raab, D. Gunderov, 2010 .