Zhiping Wang

发表

Preparation and tribological properties of Ti3C2(OH)2 nanosheets as additives in base oil

Changsheng Li, Xianghua Zhang, Zhide Huang, 2015 .

Effects of CeO2 on friction and wear characteristics of Fe–Ni–Cr alloy coatings

P. La, Zhiping Wang, Zhenyuan Zhang, 2006 .

Effect of CeO2 on the microstructure and wear behavior of thermal spray welded NiCrWRE coatings

Hongbiao Dong, S. Hainsworth, Zhiping Wang, 2007 .

Microstructure and Dry-Sliding Wear Behavior of Thermal Sprayed and Fused Ni-Based Coatings with the Addition of La2O3

Zhiping Wang, Zhenyuan Zhang, Bunv Liang, 2010 .

Rare earth effect on the microstructure and tribological properties of FeNiCr coatings

Zhiping Wang, Zhenyuan Zhang, B. Liang, 2010 .

Feasibility study of dissimilar joining of aluminum alloy 5052 to pure copper via thermo-compensated resistance spot welding

T. Yuan, J. Bi, Y. Chao, 2016 .

Microstructures and corrosion behaviors of squeeze‐cast Mg‐4Al‐2RE and Mg‐4Al‐0.5RE‐xCa (x = 0.3, 0.8, and 1.5) alloys

Yun Chen, Xinhong Xiong, Zhiping Wang, 2018 .

Adhesion Strength of Thermal Barrier Coatings with Thermal-Sprayed Bondcoat Treated by Compound Method of High-Current Pulsed Electron Beam and Grit Blasting

P. Lv, Jie Cai, Q. Guan, 2015, Journal of Thermal Spray Technology.

Apparent Interfacial Toughness of Undoped and Photoluminescent Eu3+-Doped Yttria-Stabilized Zirconia Thermal Barrier Coatings

T. Sentenac, P. Lours, F. Ansart, 2019, Journal of Thermal Spray Technology.

Isothermal oxidation and TGO growth behaviors of YAG/YSZ double-ceramic-layer thermal barrier coatings

Yi Zhang, Wen-sheng Li, Zhiping Wang, 2021 .

Microstructural characterization of modified YSZ thermal barrier coatings by high-current pulsed electron beam

Q. Guan, Shengzhi Yang, Zhiping Wang, 2014 .

Role of Nitrogen in the Formation of $\hbox{CN}_{x}$ Films by Pulsed Laser Deposition

Zhiping Wang, K. Masugata, H. Ito, 2012, IEEE Transactions on Plasma Science.

Fabrication of DLC films by pulsed ion beam ablation in a dense plasma focus device

H. Yousefi, Zhiping Wang, K. Masugata, 2009 .

Deposition of DLC Films using Intense Pulsed Beam in Plasma Focus Device

Hiroaki Ito, Zhiping Wang, H. Ito, 2017 .

Self-heating probe instrument and method for measuring high temperature melting volume change rate of material

Jun-wei Wang, Zhiping Wang, Bo Cheng, 2013 .

Influence of isothermal aging conditions on APS TBC's interfacial fracture toughness

T. Sentenac, P. Lours, Kun-ying Ding, 2017 .

PREPARATION OF GRADATED NANO-TRANSIENT LAYER AT INTERFACE BETWEEN DEPOSITED FILM AND SUBSTRATE BY HIGH-INTENSITY PULSED ION BEAM IRRADIATION

Liping Zhang, M. Lei, Xueyang Zhang, 2010 .

Thermal Cycling Behavior of Thermal Barrier Coatings with MCrAlY Bond Coat Irradiated by High-Current Pulsed Electron Beam.

Jinzhong Lu, P. Lv, Q. Guan, 2016, ACS applied materials & interfaces.

Isothermal oxidation behaviour of thermal barrier coatings with CoCrAlY bond coat irradiated by high-current pulsed electron beam

Q. Guan, X. Hou, Zhiping Wang, 2014 .

Surface microstructure and high temperature oxidation resistance of thermal sprayed CoCrAlY coating irradiated by high current pulsed electron beam

Q. Guan, Shengzhi Yang, L. Ji, 2014 .

Microstructure, mechanical properties and strengthening mechanisms of in-situ prepared (Ti5Si3 + TiC0.67)/TC4 composites

Yimin Gao, Yiran Wang, Zhiping Wang, 2019, Journal of Alloys and Compounds.

Improved microstructures and mechanical properties for 7085Al alloy subjected to slow quenching by aging treatment

Hao-wei Wang, Qing Yang, Yugang Li, 2021, Materials Science and Engineering: A.

Tensile behavior of nickel-base single-crystal superalloy DD6

Z. Yue, Qiaoxin Zhang, Xinhong Xiong, 2015 .

Intermediate temperature brittleness and directional coarsening behavior of nickel-based single-crystal superalloy DD6

Z. Yue, Qiaoxin Zhang, Xinhong Xiong, 2015 .

Wear characterization of thermal spray welded Ni–Cr–B–Si–RE alloy coatings

Zhiping Wang, Zhenyuan Zhang, Bunv Liang, 2009 .

Tribological properties of flame sprayed Fe–Ni–RE alloy coatings under reciprocating sliding

Zhiping Wang, Zhenyuan Zhang, Bunv Liang, 2006 .

Deformation-induced ultrafine grains near fatigue crack tip and correlative fatigue damage in Al matrix composite

Hao-wei Wang, Yugang Li, Zhiping Wang, 2021 .

Fabrication and properties of lightweight SiOC fiber-based assembly aerogels with hierarchical pore structure

Jiachen Liu, Wei Dong, Ruili Liu, 2018, Ceramics International.

Preparation of TiO2/Ti3C2Tx hybrid nanocomposites and their tribological properties as base oil lubricant additives

M. Xue, Changsheng Li, Wei Wei, 2017 .

Preparation of silicon carbide film by a plasma focus device

H. Yousefi, Zhiping Wang, K. Masugata, 2008 .

Surface modification of CoCrAlY coating by high-current pulsed electron beam treatment under the “evaporation” mode

P. Lv, Q. Guan, X. Hou, 2014 .

Effect of Anodic Behavior on Electrochemical Machining of TB6 Titanium Alloy

S. Manladan, Zuming Liu, Weidong Liu, 2017 .

Electro-thermal damage of carbon fiber/epoxy composite laminate

L. Ye, Zhiping Wang, Yankuan Liu, 2018 .

Effect of isothermal heat treatment on crystallinity, tensile strength and failure mode of CF/PPS laminate

Zhiping Wang, Xuelin Zhou, Yankuan Liu, 2021, High Performance Polymers.

Studies on distribution of element contents in transient layer at interface between boron-doped diamond film electrode and tantalum substrate

Liping Zhang, Zhiping Wang, C. Gao, 2011 .

Fouling corrosion in aluminum heat exchangers

Minyu Ma, Zhiping Wang, Sun Jingxin, 2015 .

Surface nanocrystallization of 3Cr13 stainless steel induced by high-current pulsed electron beam irradiation

Q. Guan, L. Ji, Zhiping Wang, 2013 .

Modeling and fabrication of microhole by electrochemical micromachining using retracted tip tool

Yang Li, Zuming Liu, Weidong Liu, 2017 .

Microstructure and properties of thermal-sprayed NiCrWRE coatings

Zhiping Wang, Zhenyuan Zhang, Bunv Liang, 2008 .

Phase-field modeling of free dendritic growth in binary alloy under forced flow

Li Feng, Changsheng Zhu, Rong-zhen Xiao, 2011 .

Influence of mixed rare earth elements(Y and Ce) on the microstructure and corrosion behaviour of Mg-4Al-3Ca alloy

Juan Du, Yun Chen, Kaixiong Hu, 2018, Materials Research Express.

Influence of Anisotropy on Dendritic Growth in Binary Alloy with Phase-Field Simulation

Li Feng, Changsheng Zhu, Rong-zhen Xiao, 2009 .