Chuangqi Zhao

发表

Local deformation behaviour of saturated silica sand during undrained cyclic torsional shear tests using image analysis

J. Koseki, Weichen Liu, Chuangqi Zhao, 2020 .

An image-based method for evaluating local deformations of saturated sand in undrained torsional shear tests

J. Koseki, Chuangqi Zhao, 2020, Soils and Foundations.

Charpy Transverse Impact Failure Mechanisms of 3D MWK Composites at Room and Liquid Nitrogen Temperatures

Dian‐sen Li, Nan Jiang, Lei Jiang, 2015 .

Experimental study on the tension fatigue behavior and failure mechanism of 3D multi-axial warp knitted composites

Y. Tan, Dian‐sen Li, Nan Jiang, 2015 .

Charpy impact properties and failure mechanism of 3D MWK composites at room and cryogenic temperatures

Y. Tan, Dian‐sen Li, Nan Jiang, 2014 .

A comparative study on the tensile properties and failure mechanism of 3D MWK composites at room and liquid nitrogen temperature

Na Lu, Dian‐sen Li, Nan Jiang, 2014 .

Super-tough and strong nanocomposite fibers by flow-induced alignment of carbon nanotubes on grooved hydrogel surfaces

Ruochen Fang, Mingjie Liu, Pengchao Zhang, 2019, Science China Materials.

Confined Synthesis of Two-Dimensional Covalent Organic Framework Thin Films within Superspreading Water Layer.

L. Wan, Cheng Lu, Mingjie Liu, 2018, Journal of the American Chemical Society.

Image based local deformation measurement of saturated sand specimen in undrained cyclic triaxial tests

J. Koseki, Tomoko Sasaki, Chuangqi Zhao, 2018, Soils and Foundations.

Direct and Indirect Local Deformations of Sand in Undrained Cyclic Triaxial Tests by Image Analysis Technique

J. Koseki, Chuangqi Zhao, Yukika Miyashita, 2017 .

Superspreading on Immersed Gel Surfaces for the Confined Synthesis of Thin Polymer Films.

Lei Jiang, Mingjie Liu, Shutao Wang, 2016, Angewandte Chemie.

Large-Area Ultrastrong and Stiff Layered MXene Nanocomposites by Shear-Flow-Induced Alignment of Nanosheets.

Tianyi Zhao, Qunfeng Cheng, Chuangqi Zhao, 2022, ACS nano.

Effect of temperature on bending properties and failure mechanism of three-dimensional multiaxial warp-knitted carbon/epoxy composites

Dian‐sen Li, Nan Jiang, Lei Jiang, 2016 .

Rheological properties and early mechanical strength of oil-well cement modified by hybrid nano-silica and nano-hexagonal boron nitride

Baochang Liu, Chuangqi Zhao, J. Yun, 2022, Construction and Building Materials.

Static and dynamic mechanical behavior of 3D integrated woven spacer composites with thickened face sheets

Dian‐sen Li, Nan Jiang, Lei Jiang, 2016, Fibers and Polymers.

Experimental study on the charpy impact failure of 3D integrated woven spacer composite at room and liquid nitrogen temperature

Dian‐sen Li, Nan Jiang, Lei Jiang, 2015, Fibers and Polymers.

Experimental study on the compression properties and failure mechanism of 3D integrated woven spacer composites

Dian‐sen Li, Nan Jiang, Lei Jiang, 2014 .

Recent Advances in Bioinspired Gel Surfaces with Superwettability and Special Adhesion

Lei Jiang, Mingjie Liu, Pengchao Zhang, 2019, Advanced science.

Experimental investigation on the compression properties and failure mechanism of 3D braided composites at room and liquid nitrogen temperature

Dian‐sen Li, Nan Jiang, Lei Jiang, 2014 .

Layered nanocomposites by shear-flow-induced alignment of nanosheets

A. Tomsia, Y. Ishida, Ruochen Fang, 2020, Nature.

Covalent tethering of photo-responsive superficial layers on hydrogel surfaces for photo-controlled release† †Electronic supplementary information (ESI) available. See DOI: 10.1039/c6sc04634g Click here for additional data file.

Mingjie Liu, Qinfeng Rong, Wenwei Lei, 2016, Chemical science.

Fabrication, properties and failure of 3D integrated woven spacer composites with thickened face sheets

Dian‐sen Li, Nan Jiang, Lei Jiang, 2015 .

Experimental study on the bending properties and failure mechanism of 3D integrated woven spacer composites at room and cryogenic temperature

Dian‐sen Li, Nan Jiang, Lei Jiang, 2014 .

Integration of hydrogels with functional nanoparticles using hydrophobic comb-like polymers as an adhesive layer

Lei Jiang, Mingjie Liu, La Li, 2018 .

General Strategy to Fabricate Highly Filled Microcomposite Hydrogels with High Mechanical Strength and Stiffness.

Ruochen Fang, Mingjie Liu, Qinfeng Rong, 2018, ACS applied materials & interfaces.

Superwetting Injectable Hydrogel with Ultrastrong and Fast Tissue Adhesion for Minimally Invasive Hemostasis

Mingjie Liu, Xi Gong, Tianyi Zhao, 2022, Advanced healthcare materials.