Yongfa Zhang

发表

The gradient microstructure and deformation heterogeneity in HPDC AM60 alloy

Q. Liu, Jingxiao Li, Jiang Zheng, 2020 .

Assessment of Red Bed Groundwater in the Jinqu Basin, Southeastern China: Its Enrichment Regularity and Emergency Exploitation Potential

Haiqing Yang, X. Tian, Yu Zhao, 2020, Natural Resources Research.

Experimental characterization and dependence of rock fracture permeability on 3D stresses

Yanlin Zhao, W. Wan, Chaolin Wang, 2019, Arabian Journal of Geosciences.

Experimental Study of Adsorption Effects on Shale Permeability

Y. Zhao, Chaolin Wang, Qiang Liu, 2019, Natural Resources Research.

Ductility prediction of HPDC aluminum alloy using a probabilistic ductile fracture model

S. Münstermann, Shiyao Huang, Fuhui Shen, 2022, Theoretical and Applied Fracture Mechanics.

Microstructure-property relationships in HPDC Aural-2 alloy: Experimental and CP modeling approaches

S. Münstermann, Jingxiao Li, Shiyao Huang, 2022, Materials Science and Engineering: A.

A Semianalytical Solution for a Griffith Crack Nonuniformly Pressurized By Internal Fluid

Haiqing Yang, Chaolin Wang, Yu Zhao, 2020, Rock Mechanics and Rock Engineering.

The deformation modes and transferability during low-cycle fatigue of Mg and Mg–3Y alloy

D. Yin, Jinsong Rao, Jiang Zheng, 2022, Materials Science and Engineering: A.

A new model for predicting hydraulic fracture penetration or termination at an orthogonal interface between dissimilar formations

Chaolin Wang, J. Bi, Yongfa Zhang, 2022, Petroleum Science.

Hydraulic fracturing characteristics and evaluation of fracturing effectiveness under different anisotropic angles and injection rates: An experimental investigation in absence of confining pressure

Chaolin Wang, Qiang Liu, Yongfa Zhang, 2022, Journal of Natural Gas Science and Engineering.

Analysis of the Pressure-Pulse Propagation in Rock: a New Approach to Simultaneously Determine Permeability, Porosity, and Adsorption Capacity

L. Pan, Chaolin Wang, Yongfa Zhang, 2019, Rock Mechanics and Rock Engineering.

The Ductility Variation of High-Pressure Die-Cast AE44 Alloy: The Role of Inhomogeneous Microstructure

Hao Zhou, D. Yin, Jiang Zheng, 2021, Metallurgical and Materials Transactions A.

Anisotropic cyclic deformation behavior of an extruded Mg-3Y alloy sheet with rare earth texture

D. Yin, Jinsong Rao, Jiang Zheng, 2022, Journal of Magnesium and Alloys.

Quasi-in-situ analysis of dependency of deformation mechanism and work-hardening behavior on texture in Mg-2Zn-0.1Ca alloy

Qing Liu, Jinsong Rao, Jiang Zheng, 2019, Journal of Alloys and Compounds.

Porosity quantification for ductility prediction in high pressure die casting AM60 alloy using 3D X-ray tomography

Jiang Zheng, Yongfa Zhang, Haoge Shou, 2020 .

A New Criterion for a Toughness-Dominated Hydraulic Fracture Crossing a Natural Frictional Interface

Chaolin Wang, P. He, Yongfa Zhang, 2018, Rock Mechanics and Rock Engineering.

Experimental Study on the Effects of Unloading Normal Stress on Shear Mechanical Behaviour of Sandstone Containing a Parallel Fissure Pair

G. Ma, Da Huang, Zhu Zhong, 2019, Rock Mechanics and Rock Engineering.

Experimental study on relationship between fracture propagation and pumping parameters under constant pressure injection conditions

Haiqing Yang, Qiang Liu, Guodong Tian, 2022, Fuel.

Impacts of wellbore orientation with respect to bedding inclination and injection rate on laboratory hydraulic fracturing characteristics of Lushan shale

Chaolin Wang, Yongfa Zhang, Yu Zhao, 2023, Fuel.

Numerical Study on Effect of Suction Slot Geometric Parameters on Airflow Field in Compact Spinning

Yongfa Zhang, Huiting Lin, Jun Wang, 2022, Journal of Shanghai Jiaotong University (Science).

A composite criterion to predict subsequent intersection behavior between a hydraulic fracture and a natural fracture

P. He, Yongfa Zhang, Yu Zhao, 2019, Engineering Fracture Mechanics.

Analysis of local stress/strain fields in an HPDC AM60 plate containing pores with various characteristics

S. Münstermann, Fuhui Shen, Jiang Zheng, 2021 .

A thermodynamically consistent SPH-PFM model for modelling crack propagation and coalescence in rocks

Yang Li, Zhiqiang Zhou, Chaolin Wang, 2023, Theoretical and Applied Fracture Mechanics.

Mutual impact of true triaxial stress, borehole orientation and bedding inclination on laboratory hydraulic fracturing of Lushan shale

Chaolin Wang, A. Zang, Yongfa Zhang, 2023, Journal of Rock Mechanics and Geotechnical Engineering.

Combined effects of bedding anisotropy and matrix heterogeneity on hydraulic fracturing of shales from Changning and Lushan, South China: an experimental investigation

Chaolin Wang, J. Bi, Yongfa Zhang, 2023, Journal of Asian Earth Sciences.

Influences of calcium and magnesium sources on microbially modified strongly weathered phyllite filler

Kun Zheng, J. Bi, Yongfa Zhang, 2024, Construction and Building Materials.

Evaluating fracture resistance of basalt fiber reinforced mortar to mode I/III load using edge notched disc bend (ENDB) specimen: Insights from acoustic emission and morphological analysis

Chaolin Wang, J. Bi, Yongfa Zhang, 2024, Construction and Building Materials.

Acoustic Emission Evolution and Hydraulic Fracture Morphology of Changning Shale Stressed to Failure at Different Injection Rates in the Laboratory

Yongfa Zhang, Anfa Long, Yu Zhao, 2023, Rock Mechanics and Rock Engineering.

Mechanical anisotropy associated with beddings in shale under Brazilian test conditions: Insights from acoustic emission statistics

Chaolin Wang, Yongfa Zhang, Qing-feng Deng, 2024, Journal of Rock Mechanics and Geotechnical Engineering.

Experimental investigation on fractal mechanism and shear failure characteristics of cement mortar at different curing ages

Yongfa Zhang, Yu Zhao, Xiaojiang Deng, 2024, Journal of Building Engineering.

Assessment of basalt fiber and gelling enhancement effects on mixed mode I/III fracture performance of the mortar composites

Kun Zheng, Chaolin Wang, J. Bi, 2024, Theoretical and Applied Fracture Mechanics.