J. Pinc

发表

Comparison of Mechanical and Superconducting Properties of YBaCuO and GdBaCuO Single Grains Prepared by Top-Seeded Melt Growth

T. Hlásek, J. Kubásek, V. Bartůněk, 2016 .

Microstructural, Mechanical, Corrosion and Cytotoxicity Characterization of Porous Ti-Si Alloys with Pore-Forming Agent

E. Jablonská, E. Gregorová, P. Novák, 2020, Materials.

Pollination efficiency of cockroaches and other floral visitors of Clusia blattophila.

B. Vlasáková, J. Pinc, F. Jůna, 2019, Plant biology.

Fine fluorite nanoparticles synthesized from biomass ash

O. Jankovský, D. Sedmidubský, P. Ulbrich, 2018, Journal of Fluorine Chemistry.

Rare earth nanofluorides: synthesis using ionic liquids

V. Bartůněk, J. Pinc, M. Kuchař, 2019, Reviews in Inorganic Chemistry.

Characterization of a Zn-Ca5(PO4)3(OH) Composite with a High Content of the Hydroxyapatite Particles Prepared by the Spark Plasma Sintering Process

J. Kubásek, D. Vojtěch, V. Hybasek, 2020 .

Zinc-based Degradable Biomaterials - Limitations and Enhancements

J. Pinc, T. Lovaši, I. Voňavková, 2019, Manufacturing Technology.

Thermal decomposition of lactates: Towards ultrafine nanostrucured oxides

T. Hlásek, O. Jankovský, D. Sedmidubský, 2018 .

ZnMg0.8Ca0.2 (wt%) biodegradable alloy – The influence of thermal treatment and extrusion on microstructural and mechanical characteristics

J. Drahokoupil, J. Kubásek, J. Manak, 2020 .

A Complex Evaluation of the In-Vivo Biocompatibility and Degradation of an Extruded ZnMgSr Absorbable Alloy Implanted into Rabbit Bones for 360 Days

J. Kubásek, M. Bartoš, R. Foltán, 2021, International Journal of Molecular Sciences.

Zn–0.8Mg–0.2Sr (wt.%) Absorbable Screws—An In-Vivo Biocompatibility and Degradation Pilot Study on a Rabbit Model

J. Kubásek, M. Bartoš, R. Foltán, 2021, Materials.

Influence of the Microstructure of the Initial Material on the Zn Wires Prepared by Direct Extrusion with a Huge Extrusion Ratio

L. Kadeřávek, L. Klimša, J. Kopeček, 2021, Metals.

Influence of model environment complexity on corrosion mechanism of biodegradable zinc alloys

J. Kubásek, J. Fojt, D. Alferi, 2021, Corrosion Science.

Microstructural, mechanical, in vitro corrosion and biological characterization of an extruded Zn-0.8Mg-0.2Sr (wt%) as an absorbable material.

J. Kubásek, J. Fojt, S. Krajewski, 2021, Materials science & engineering. C, Materials for biological applications.

Microstructural characterization and optimization of the ZnMg0.8(CaO)0.26 alloy processed by ball milling and subsequent extrusion

D. Vojtěch, J. Pinc, P. Veřtát, 2020 .

Characterization of Newly Developed Zinc Composite with the Content of 8 wt.% of Hydroxyapatite Particles Processed by Extrusion

D. Vojtěch, J. Manak, F. Průša, 2020, Materials.

Zn-Mg Biodegradable Composite: Novel Material with Tailored Mechanical and Corrosion Properties

J. Kubásek, D. Dvorsky, D. Vojtěch, 2019, Materials.

Influence of Processing on the Microstructure and the Mechanical Properties of Zn/HA8 wt.% Biodegradable Composite

J. Drahokoupil, D. Vojtěch, F. Průša, 2019, MANUFACTURING TECHNOLOGY.

Microstructure and mechanical properties of the potentially biodegradable ternary system Zn-Mg0.8-Ca0.2

J. Kubásek, Klára Hosová, J. Pinc, 2019, Procedia Structural Integrity.

Microstructure evolution and mechanical performance of ternary Zn-0.8Mg-0.2Sr (wt. %) alloy processed by equal-channel angular pressing

J. Kubásek, P. Lejček, D. Vojtěch, 2021 .

Preparation of manganese oxide nanoparticles by thermal decomposition of nanostructured manganese carbonate

O. Jankovský, V. Bartůněk, J. Pinc, 2017, Chemical Papers.

Microstructural and Mechanical Characterization of Newly Developed Zn-Mg-CaO Composite

J. Drahokoupil, J. Kubásek, D. Vojtěch, 2022, Materials.

Influence of Ceramic Particles Character on Resulted Properties of Zinc-Hydroxyapatite/Monetite Composites

D. Vojtěch, F. Průša, Klára Hosová, 2021, Metals.

The Effect of Zinc and Calcium Addition on Magnesium Alloy

Zdeněk Kačenka, J. Pinc, T. Lovaši, 2020, Manufacturing Technology.

The evolution of microstructure and mechanical properties of Zn-0.8Mg-0.2Sr alloy prepared by casting and extrusion

J. Kubásek, D. Vojtěch, M. Godec, 2022, Journal of Alloys and Compounds.

Influence of the pre-exposure of a Zn-0.8Mg-0.2Sr absorbable alloy in bovine serum albumin containing media on its surface changes and their impact on the cytocompatibility of the material

J. Kubásek, D. Vojtěch, P. Ashcheulov, 2021 .

Extrusion of the biodegradable ZnMg0.8Ca0.2 alloy - The influence of extrusion parameters on microstructure and mechanical characteristics.

J. Drahokoupil, J. Kubásek, D. Vojtěch, 2020, Journal of the mechanical behavior of biomedical materials.

Thermal Plasma Spraying as a New Approach for Preparation of Zinc Biodegradable Scaffolds: A Complex Material Characterization

J. Kubásek, D. Vojtěch, E. Jablonská, 2019, Journal of Thermal Spray Technology.

ZnMg0.8Ca/Sr0.2 ternary alloys – the influence of the third element on material properties

J. Drahokoupil, J. Kubásek, J. Manak, 2019, Procedia Structural Integrity.

The preferential formation of Ni2Al3, Fe2Al5, and Ti2Al5 phases in aluminide systems

P. Novák, J. Pinc, A. Školáková, 2022, Materials Chemistry and Physics.

Ultrafine-Grained Zn–Mg–Sr Alloy Synthesized by Mechanical Alloying and Spark Plasma Sintering

J. Kubásek, D. Vojtěch, D. Nečas, 2022, Materials.

Advanced Zinc–Magnesium Alloys Prepared by Mechanical Alloying and Spark Plasma Sintering

J. Kubásek, D. Vojtěch, D. Nečas, 2022, Materials.

Negative effect of inbreeding on fitness of an arctic–alpine Hieracium alpinum (Asteraceae), a species with a geographical parthenogenesis distribution pattern

Vít Latzel, P. Mráz, J. Chrtek, 2020, Plant Systematics and Evolution.

Thermoactivated Dislocation Motion in Rolled and Extruded Magnesium: Data of the Low-Temperature Acoustic Experiment

A. Ostapovets, Olena Vatazhuk, L. Král, 2021, Metals.

Evolutionary history and genetic diversity of apomictic allopolyploids in Hieracium s.str.: morphological versus genomic features.

P. Mráz, J. Chrtek, J. Pinc, 2020, American journal of botany.

A pentaploid endosperm and a Penaea-type embryo sac are likely synapomorphies of Azorella (Apiaceae, Azorelloideae)

J. Pinc, Tomáš Urfus, P. Sklenář, 2022, Plant Systematics and Evolution.

Preparation of surfaces of composite samples for tip based micro-analyses using ion beam milling.

V. Bartůněk, D. Hradil, J. Hradilová, 2019, Micron.

Suppression of mechanical instability in bioabsorbable ultrafine-grained Zn through in-situ stabilization by ZnO nanodispersoids

J. Kubásek, D. Dvorsky, M. Balog, 2023, Journal of Materials Research and Technology.

Tunable rapid microwave synthesis of up-converting hexagonal NaYxGdyYbzEr(1−x−y−z)F4 nanocrystals in large quantity

K. Smolková, P. Ježek, P. Ulbrich, 2015 .

A detailed mechanism of degradation behaviour of biodegradable as-ECAPed Zn-0.8Mg-0.2Sr with emphasis on localized corrosion attack

J. Drahokoupil, J. Kubásek, D. Vojtěch, 2023, Bioactive materials.

A zinc phosphate layered biodegradable Zn-0.8Mg-0.2Sr alloy: Characterization and mechanism of hopeite formation

J. Kubásek, D. Vojtěch, E. Jablonská, 2024, Surface and Coatings Technology.

Exploring the microstructure, mechanical properties, and corrosion resistance of innovative bioabsorbable Zn-Mg-(Si) alloys fabricated via powder metallurgy techniques

J. Kubásek, D. Vojtěch, P. Minárik, 2024, Journal of Materials Research and Technology.

Nanograined Zinc Alloys with Improved Mechanical Properties Prepared by Powder Metallurgy.

J. Kubásek, D. Nečas, J. Pinc, 2023, Microscopy and microanalysis : the official journal of Microscopy Society of America, Microbeam Analysis Society, Microscopical Society of Canada.

Characterization of Zn-1.5Mg and Zn-1.5Mg-0.5Ca Alloys Considered for Biomedical Application

J. Kubásek, D. Vojtěch, J. Pinc, 2019, Key Engineering Materials.