I. Volokitina

发表

STRUCTURE AND MECHANICAL PROPERTIES OF ALUMINUM ALLOY 2024 AFTER CRYOGENIC COOLING DURING ECAP

I. Volokitina, 2020 .

MICROSTRUCTURE OF BIMETALLIC WIRE IN THE “ECAP-DRAWING” PROCESS

I. Volokitina, A. Volokitin, A. Naizabekov, 2021 .

Prospects of Application and Global Significance of Graphene

I. Volokitina, A. Denissova, A. Volokitin, 2022, Progress in Physics of Metals.

Changes of mechanical properties of hot rolled steel as a result of a reducing of rigidity of the rolling stands

I. Volokitina, S. Lezhnev, E. Panin, 2015, ICIS 2015.

Modeling of Non-Ferrous Metallurgy Waste Disposal with the Production of Iron Silicides and Zinc Distillation

M. Amran, R. Fediuk, S. Klyuev, 2022, Materials.

Effect of Cryogenic Cooling After Ecap on Mechanical Properties of Aluminum Alloy D16

I. Volokitina, 2019, Metal Science and Heat Treatment.

Thermodynamic Simulation of Environmental and Population Protection by Utilization of Technogenic Tailings of Enrichment

M. Amran, R. Fediuk, N. Vatin, 2022, Materials.

Development of a Thermomechanical Treatment Mode for Stainless-Steel Rings

R. Fediuk, I. Volokitina, A. Kolesnikov, 2022, Materials.

Hardening of Bimetallic Wires from Secondary Materials Used in the Construction of Power Lines

R. Fediuk, I. Volokitina, A. Kolesnikov, 2022, Materials.

Study of the Properties of Antifriction Rings under Severe Plastic Deformation

R. Fediuk, S. Klyuev, L. Sabitov, 2022, Materials.

Effect of Initial Structural State on Formation of Structure and Mechanical Properties of Steels Under ECAP

I. Volokitina, G. Kurapov, 2018, Metal Science and Heat Treatment.

Research of Combined Process “Rolling-Pressing” Influence on the Microstructure and Mechanical Properties of Aluminium

I. Volokitina, S. Lezhnev, E. Panin, 2013 .

Effect of Combined Rolling–ECAP on Ultrafine-Grained Structure and Properties in 6063 Al Alloy

I. Volokitina, A. Naizabekov, S. Lezhnev, 2018, Journal of Materials Engineering and Performance.

Research of the Microstructure and Mechanical Properties of Copper and CuZn36 Developing during Deformation into the Equal Channel Speed Matrix with High-Intensity Cooling

I. Volokitina, S. Lezhnev, E. Orlova, 2016 .

RESEARCH OF INFLUENCE EQUAL CHANNEL ANGULAR PRESSING ON THE MICROSTRUCTURE OF COPPER

I. Volokitina, S. Lezhnev, T. Koinov, 2014 .

Effect of the Initial Structural State of Cr–Mo High-Temperature Steel on Mechanical Properties after Equal-Channel Angular Pressing

I. Volokitina, A. Nayzabekov, 2019, Physics of Metals and Metallography.

Evolution of Microstructure and Mechanical Properties of Composite Aluminum-Based Alloy during ECAP

I. Volokitina, S. Lezhnev, S. N. Lezhnev, 2018, Physics of Metals and Metallography.

Evolution of microstructure and mechanical properties of steel in the course of pressing–drawing

I. Volokitina, A. Volokitin, S. Lezhnev, 2017, Physics of Metals and Metallography.

Realization of the innovative potential of radial-shear rolling for forming the structure and mechanical properties of AISI-321 austenitic stainless steel

I. Volokitina, A. Naizabekov, S. Lezhnev, 2021, Matéria (Rio de Janeiro).

Graded Microstructure Preparation in Austenitic Stainless Steel during Radial-Shear Rolling

I. Volokitina, A. Naizabekov, S. Lezhnev, 2021, Metallurgist.

Effect of Ecap-Drawing on the Microstructure of a Bimetallic Wire

I. Volokitina, A. Naizabekov, A. Volokitin, 2021, Metallurgist.

The development and testing of a new method of qualitative analysis of the microstructure quality, for example of steel AISI 321 subjected to radial shear rolling

I. Volokitina, A. Naizabekov, S. Lezhnev, 2019, Physica Scripta.

AK 9 MODIFIED BY LIGATURE Al ALLOY : MICROSTRUCTURE AND MECHANICAL PROPERTIES

I. Volokitina, S. Lezhnev, M. Knapiński, 2019 .

Study of changes in microstructure and metal interface Cu/Al during bimetallic construction wire straining

I. Volokitina, A. Volokitin, B. Sapargaliyeva, 2023, Case Studies in Construction Materials.

Effect of Deformation by Ecap-Drawing Method on Change in Steel-Aluminum Wire Properties

I. Volokitina, A. Naizabekov, A. Volokitin, 2023, Metallurgist.

Evolution of the Microstructure and Mechanical Properties of Copper under ECAP with Intense Cooling

I. Volokitina, 2020, Metal Science and Heat Treatment.

Influence of Equal-Channel Angular Pressing on Changes in the Microstructure of Steel Grade 1055

I. Volokitina, A. Naizabekov, 2021, Metallurgist.

Evolution of Microstructure and Mechanical Properties of Steel Under a Combined “Helical Rolling – Pressing” Process

I. Volokitina, A. Naizabekov, S. Lezhnev, 2022, Metal Science and Heat Treatment.

Recycling of stainless steel bar scrap by radial-shear rolling to obtain an ultrafine-grained gradient structure

I. Volokitina, A. Naizabekov, S. Lezhnev, 2021, Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY).

Structure and Mechanical Properties of AISI1045 in the Helical Rolling–Pressing Process

I. Volokitina, A. Volokitin, A. Naizabekov, 2020, Journal of Materials Engineering and Performance.

RECYCLING OF STAINLESS STEEL BAR SCRAP BY RADIAL-SHEAR ROLLING TO OBTAIN A GRADIENT ULTRAFINE-GRAINED STRUCTURE

I. Volokitina, A. Naizabekov, E. Panin, 2021 .

Physico-Chemical Study of the Possibility of Utilization of Coal Ash by Processing as Secondary Raw Materials to Obtain a Composite Cement Clinker

I. Volokitina, A. Volokitin, Akmaral Koishina, 2023, Journal of Composites Science.

Effect of Preliminary Heat Treatment on Deformation of Brass by the Method of ECAP

I. Volokitina, 2021, Metal science and heat treatment.

Change in Copper Microstructure and Mechanical Properties with Deformation in an Equal Channel Stepped Die

I. Volokitina, A. Naizabekov, S. Lezhnev, 2015, Metal Science and Heat Treatment.

Plasticity as a Physical-Chemical Process of Deformation of Crystalline Solids

I. Volokitina, S. Lezhnev, A. Tolkushkin, 2015 .

Thermophysical indicators of elaborated sandwich cladding constructions with heat-reflective coverings and air gaps

I. Volokitina, A. Kolesnikov, U. Suleimenov, 2023, Case Studies in Construction Materials.

Effect of thermomechanical processing of building stainless wire to increase its durability

I. Volokitina, A. Volokitin, T. Fedorova, 2023, Case Studies in Construction Materials.

Finite Element Modeling of ECAP-Linex Combined Process of Severe Plastic Deformation

R. Yordanova, I. Volokitina, A. Volokitin, 2023, Modelling and Simulation in Engineering.

Study of the deformation process in an equal-channel step matrix of a new design based on computer simulation

I. Volokitina, A. Naizabekov, S. Lezhnev, 2021, IOP Conference Series: Materials Science and Engineering.

Structure and Mechanical Properties of Steel in the Process “Pressing–Drawing”

I. Volokitina, A. Volokitin, A. Naizabekov, 2019, Journal of Materials Engineering and Performance.

Method for the Determining Metal Mechanical Characteristics Using FEM

I. Volokitina, E. Panin, K. Tolubaev, 2021 .