C. Ouchi

发表

Manufacturing process and mechanical properties of fine TiB dispersed Ti-6Al-4V alloy composites obtained by reaction sintering

K. Funami, M. Kobayashi, Seiichi Suzuki, 1998 .

Surface Hardening Treatment for C.P. Titanium and Titanium Alloys in Use of Ar–5%CO Gas

T. Narushima, Y. Iguchi, T. Murakami, 2006 .

Preparation of Calcium Phosphate Films by Radiofrequency Magnetron Sputtering

H. Kawamura, H. Masumoto, T. Goto, 2005 .

Dynamic Recrystallization Behavior of Austenite in Nb-bearing High Strength Low Alloy Steels and Stainless Steel

C. Ouchi, T. Okita, 1982 .

Effect of Chemical Composition on Physical Properties of Nonmagnetic High Manganese Steel and Its Processing Condition

M. Ueda, C. Ouchi, Y. Kohsaka, 1983 .

Solubilities and equilibrium distribution coefficients of oxygen and carbon in silicon

T. Narushima, Y. Iguchi, C. Ouchi, 2002 .

Surface Hardening Treatment in Use of CO Gas and Post-Heat Treatment in C.P. Titanium and Titanium Alloys

T. Narushima, Y. Iguchi, T. Murakami, 2006 .

Hot ductility in Nb-bearing high-strength low-alloy steels.

Kazuaki Matsumoto, Kazuaki Matsumoto, C. Ouchi, 1982 .

Fracture characteristics and microstructural factors in single and duplex annealed Ti-4.5Al-3V-2Mo-2Fe

M. Niinomi, D. Eylon, K. Fukunaga, 2001 .

Thermomechanical processing in titanium alloys.

C. Ouchi, 1986 .

Superplasticity of Fine TiC and TiN Dispersed Ti-6Al-4V Alloy Composites

S. Ochiai, K. Funami, C. Ouchi, 1994 .

Microstructure and properties of titanium alloy produced in the newly developed blended elemental powder metallurgy process

C. Ouchi, A. Ogawa, T. Fujita, 1996 .

Development of Steel Plates by Intensive Use of TMCP and Direct Quenching Processes

C. Ouchi, Chiaki Ouchi, 2001 .

Effects of Interrupted Accelerated Cooling after Controlled Rolling on the Mechanical Properties of Low Alloy Steels

Sadahiro Yamamoto, C. Ouchi, T. Okita, 1982 .

Hydrothermal synthesis of zeolite A using blast furnace slag

Yasutaka Iguchi, Taichi Murakami, Takayuki Narushima, 2005 .

Aluminide coating of iron

M. Yamada, C. Ouchi, A. J. Hickl, 1977 .

Calcium Phosphate Films Coated on Titanium by RF Magnetron Sputtering for Medical Applications

H. Kawamura, T. Goto, T. Narushima, 2007 .

Characterization of Calcium Phosphate Films Prepared by RF Magnetron Sputtering

H. Kawamura, T. Goto, T. Narushima, 2005 .

The Effect of Solute Elements on Hardness and Grain Size in Platinum Based Binary Alloys

T. Narushima, Masahiro Akiba, T. Murakami, 2008 .

Effects of Alloying Elements and Heat Treatment on the Strength and Ductility of Cast-Hipped TiAl

S. Takagi, C. Ouchi, 1994 .

Effects of ultra-high purification and addition of interstitial elements on properties of pure titanium and titanium alloy

C. Ouchi, S. Mitao, H. Iizumi, 1998 .

Alloy Design and Property Evaluation of New β Type Titanium Alloy with Excellent Cold Workability and Biocompatibility

T. Narushima, Y. Iguchi, C. Ouchi, 2006 .

The Effect of Hot Rolling Condition and Chemical Composition on the Onset Temperature of γ-α Transformation after Hot Rolling

C. Ouchi, Chiaki Ouchi, Isao Kozasu, 1982 .

Recrystallization in Hot Working

C. Ouchi, 1984 .

Effects of Heat Treatment and Chemical Composition on Intergranular Embrittlement Phenomena in Ultra-low-carbon Low-alloy Steels

Sadahiro Yamamoto, C. Ouchi, I. Kozasu, 1984 .

Transformation Behavior and Mechanical Properties in Very Low Carbon Transformation-strengthened Steels

Sadahiro Yamamoto, C. Ouchi, I. Kozasu, 1984 .

Deformation of austenite in the nonrecrystallization region

I. Tamura, C. Ouchi, Tomo-o Tanaka, 1988 .

Austenitic grain refinement through static recrystallization immediately after hot rolling.

C. Ouchi, T. Okita, 1984 .

Dynamic recovery and static recrystallization of 1.8% Al steel in hot deformation.

C. Ouchi, T. Okita, 1983 .

Effects of dynamic recrystallization on γ grain refinement and improvement of micro segregation of as cast austenite in 9% Ni steel

T. Narushima, Y. Iguchi, T. Murakami, 2005 .

Strength-Ductility Relationship in Solution Treated and Aged α+β Type Ti-4.5%Al-3%V-2%Fe-2%Mo Titanium Alloy

C. Ouchi, Hideaki Fukai, Kuni-nori Minakawa, 2004 .

Improvement in fracture toughness of Ti-4.5Al-3V-2Mo-2Fe through microstructural optimization

D. Eylon, Gunawarman, C. Ouchi, 2003 .

Effect of Cooling Rate on Microstructure and Fracture Characteristics of β-Rich α+β Type Ti-4.5Al-3V-2Mo-2Fe Alloy

M. Niinomi, D. Eylon, K. Fukunaga, 2001 .

Grain Refinement of As Cast Austenite by Dynamic Recrystallization in HSLA Steels

T. Narushima, Y. Iguchi, C. Ouchi, 2003 .

Alloy design and properties of new α+β titanium alloy with excellent cold workability, superplasticity and cytocompatibility

T. Narushima, T. Murakami, C. Ouchi, 2007 .

Effect of yttrium addition on grain growth of α, β and α+β titanium alloys

B. Poorganji, T. Furuhara, T. Narushima, 2010 .

β Grain Refinement due to Small Amounts of Yttrium Addition in α+β Type Titanium Alloy, SP-700

T. Narushima, Y. Iguchi, T. Murakami, 2006 .

Boron and Nitrogen in GaAs and InP Melts Equilibrated with B2O3 Flux

Taku Kudo, K. Tajima, T. Narushima, 2004 .

Dynamic and Static Restoration Behaviors of Pure Lead and Tin in the Ambient Temperature Range

T. Narushima, T. Murakami, C. Ouchi, 2007 .

Microstructural characteristics and unique properties obtained by solution treating or aging in β-rich α+β titanium alloy

C. Ouchi, K. Hasegawa, Hideaki Fukai, 1999 .

Oxidation of silicon and silicon carbide in ozone-containing atmospheres at 973 K

T. Narushima, Y. Iguchi, C. Ouchi, 2002 .

Oxidation or Nitridation Behavior of Pure Chromium and Chromium Alloys Containing 10 mass%Ni or Fe in Atmospheric Heating

T. Narushima, Y. Iguchi, C. Ouchi, 2006 .

Recovery of Calcium from BF Slag and Synthesis of Zeolite A Using Its Residue

T. Narushima, Y. Iguchi, T. Murakami, 2011 .

Behavior of oxygen in Ga-As melts with the range of as content up to 5 mass% equilibrated with B2O3 flux

K. Tajima, T. Narushima, Y. Iguchi, 2001 .

Development of a New Method for Manufacturing Iron Foam Using Gases Generated by Reduction of Iron Oxide

T. Narushima, T. Murakami, C. Ouchi, 2007 .

Alkali Hydrothermal Synthesis of Zeolite A Using Oxide By-products

T. Narushima, Y. Iguchi, T. Murakami, 2011 .

Evaluation of Sliding Wear Resistant Property of C.P. Titanium and SP-700 Titanium Alloy Surface-hardened by Ar–5%CO Gas

T. Narushima, T. Murakami, C. Ouchi, 2008 .

Surface Hardening Treatment for Titanium Materials Using Ar-5%CO Gas in Combination with Post Heat Treatment under Vacuum

T. Narushima, T. Murakami, C. Ouchi, 2009 .

Effect of Oxygen Content on Microstructure and Mechanical Properties of Cast and HIP'ed γ TiAl Alloys

S. Takagi, C. Ouchi, 1997 .

Effect of Al on ω phase transformation behavior in Ti-8V-5Fe-(1-3)Al alloy

D. Eylon, Katsumi Yamada, C. Ouchi, 1996 .

Deformation Resistance in Plate Rolling of Commercially Pure Titanium and Ti-6Al-4V Alloy

Sadahiro Yamamoto, C. Ouchi, 1986 .

Wear Loss and Elution of C.P.Ti and Titanium Alloys in Simulated Body Fluids

T. Narushima, Y. Iguchi, Kyosuke Ueda, 2005 .

Surface Hardening Treatment for Titanium and Titanium Alloys in Use of CO2 Gas

T. Narushima, Y. Iguchi, R. Sahara, 2006 .

Superplasticity of fine TiB dispersed Ti-6Al-4V Alloy Composites obtained by Reaction Sintering

K. Funami, C. Ouchi, M. Kobayashi, 1996 .

Development and applications of titanium alloy SP-700 with high formability

M. Yamada, C. Ouchi, A. Ogawa, 1996 .

The Effects of the Oxygen-enriched Surface Layer on Mechanical Properties of α+β Type Titanium Alloys

C. Ouchi, H. Iizumi, Hideaki Fukai, 2005 .

Effect of β Phase Stability at Room Temperature on Mechanical Properties in β-Rich α + β Type Ti–4.5Al–3V–2Mo–2Fe Alloy

M. Niinomi, D. Eylon, Gunawarman, 2002 .

Effects of Alloying Elements and Processing Conditions on Strength of Solution-treated and Aged Ti-6%Al-4%V Alloy Plate

C. Ouchi, H. Suenaga, Yoji Kohsaka, 1986 .

Manufacturing Process and Mechanical Properties of Fine TiB Dispersed Ti-6A1-4V Alloy Composites Obtained by Reaction Sintering

K. Funami, M. Kobayashi, C. Ouchi, 1999 .

Effect of Metallurgical Variables on Strength and Toughness of Mn-Cr and Ni-Cr Stainless Steels at 4.2 K

S. Yamamoto, C. Ouchi, N. Yamagami, 1986 .

Variations in the Microstructure and Hardness with Solution Treating and Aging Conditions in New α+β Titanium Alloy Ti–4.5%Al–6%Nb–2%Fe–2%Mo

T. Narushima, T. Murakami, C. Ouchi, 2007 .

Dynamic and Static Restoration Processes in the α Region of Commercially Pure Titanium, and Effects of Oxygen and Iron on These Processes

C. Ouchi, Hideaki Fukai, Kuni-nori Minakawa, 2005 .