J. C. Schouten

发表

Rotating reactors - A review

F. Visscher, J. van der Schaaf, T. A. Nijhuis, 2013 .

Exergy analysis of an integrated fuel processor and fuel cell (FP–FC) system

J. C. Schouten, Kj Krzysztof Ptasinski, E. R. Delsman, 2006 .

Design and operation of a preferential oxidation microdevice for a portable fuel processor

J. C. Schouten, Gert Jan Kramer, E. R. Delsman, 2004 .

The Imperial College Monopole Detector

J. C. Schouten, A. D. Caplin, C N Guy, 1984 .

G-L and G-L-S micro process engineering: Transfer of laboratory development to production-oriented scaling-out

Volker Hessel, Holger Löwe, J. C. Schouten, 2006 .

New multifunctional reactors for process intensification

J. C. Schouten, J. Markoš, 2009 .

Quantitative measures of corrosion and prevention: application to corrosion in agriculture

J. C. Schouten, P. J. Gellings, 1987 .

Numbered-up gas-liquid micro/milli channels reactor with modular flow distributor

Volker Hessel, J. C. Schouten, Ma’moun Al-Rawashdeh, 2012 .

An early-warning-method for detecting bed agglomeration in fluidized bed combustors

J. C. Schouten, C. M. van den Bleek, J. R. van Ommen, 1999 .

Modeling and analysis of autothermal reforming of methane to hydrogen in a fixed bed reformer

J. van der Schaaf, J. C. Schouten, M.H.J.M. de Croon, 2008 .

Nitrogen stripping of isopropyl-alcohol and toluene in a falling film micro reactor : gas side mass transfer experiments and modeling at isothermal conditions

J. van der Schaaf, J. C. Schouten, M.H.J.M. de Croon, 2012 .

Gas hold-up and liquid film thickness in Taylor flow in rectangular microchannels

Volker Hessel, J. C. Schouten, M.H.J.M. de Croon, 2008 .

Liquid-liquid slug flow separation in a slit shaped micro device

J. van der Schaaf, J. C. Schouten, M.H.J.M. de Croon, 2012 .

Liquid–liquid flow in an impeller–stator spinning disc reactor

F. Visscher, J. van der Schaaf, J. C. Schouten, 2013 .

Reactor modeling of sorption-enhanced autothermal reforming of methane. Part II: Effect of operational parameters

J. van der Schaaf, J. C. Schouten, M.H.J.M. de Croon, 2011 .

A Mechanistic Study of the Fischer–Tropsch Synthesis Using Transient Isotopic Tracing. Part-1: Model Identification and Discrimination

J. C. Schouten, J. Schouten, H.A.J. van Dijk, 2003 .

Microchannel plate geometry optimization for even flow distribution at high flow rates

J. C. Schouten, Gert Jan Kramer, E. R. Delsman, 2004 .

Experiments and modelling of an integrated preferential oxidation-heat exchanger microdevice

J. C. Schouten, Gert Jan Kramer, E. R. Delsman, 2004 .

Comparison between conventional fixed-bed and microreactor technology for a portable hydrogen production case

J. C. Schouten, Gert Jan Kramer, E. R. Delsman, 2005 .

Microwave-assisted Cu-catalyzed Ullmann ether synthesis in a continuous-flow milli-plant

Volker Hessel, J Jan Meuldijk, J. C. Schouten, 2012 .

Tomography measurements of gas holdup in rotating foam reactors with Newtonian, non-Newtonian and foaming liquid

Uwe Hampel, J. van der Schaaf, J. C. Schouten, 2011 .

Design of adiabatic fixed-bed reactors for the partial oxidation of methane to synthesis gas. Application to production of methanol and hydrogen-for-fuel-cells

J. C. Schouten, Guy B. Marin, M.H.J.M. de Croon, 2001 .

Development of the kinetic model of platinum catalyzed ammonia oxidation in a microreactor

J. C. Schouten, M.H.J.M. de Croon, Evgeny V. Rebrov, 2002 .

Pressure drop of gas–liquid Taylor flow in round micro-capillaries for low to intermediate Reynolds numbers

J. C. Schouten, M.H.J.M. de Croon, Evgeny V. Rebrov, 2009 .

Single phase fluid-stator heat transfer in a rotor-stator spinning disc reactor

J. van der Schaaf, J. C. Schouten, J. Schouten, 2014 .

The influence of differences between microchannels on microreactor performance

J. C. Schouten, Gert Jan Kramer, E. R. Delsman, 2005 .

A Mechanistic Study of the Fischer–Tropsch Synthesis Using Transient Isotopic Tracing. Part 2: Model Quantification

J. C. Schouten, J. Schouten, H.A.J. van Dijk, 2003 .

Effect of foam stirrer design on the catalytic performance of rotating foam stirrer reactors

J. van der Schaaf, J. C. Schouten, T. A. Nijhuis, 2012 .

Optimization of heat transfer characteristics, flow distribution, and reaction processing for a microstructured reactor/heat-exchanger for optimal performance in platinum catalyzed ammonia oxidation

J. C. Schouten, M.H.J.M. de Croon, Evgeny V. Rebrov, 2003 .

Energy efficient and controlled flow processing under microwave heating by using a millireactor–heat exchanger

Volker Hessel, J Jan Meuldijk, J. C. Schouten, 2012 .

Cost Analysis for a Continuously Operated Fine Chemicals Production Plant at 10 Kg/Day Using a Combination of Microprocessing and Microwave Heating

J. C. Schouten, V. Hessel, N. G. Patil, 2011 .

Simulation of Fluidized Beds with Lattice Gas Cellular Automata

J. C. Schouten, A. F. Bakker, S. W. de Leeuw, 1997 .

Liquid-liquid extraction systems of benzoic acid in water, heptane, methylbenzene or trichloroethylene as co-solvent

F. Visscher, J. van der Schaaf, J. C. Schouten, 2011 .

Influence of CO2 and H2O on NOx storage and reduction on a Pt-Ba/γ-Al2O3 catalyst

J. C. Schouten, M.H.J.M. de Croon, Vr Vikrant Gangwal, 2007 .

Foam supported sulfonated polystyrene as a new acidic material for catalytic reactions

J. van der Schaaf, J. C. Schouten, T. A. Nijhuis, 2012 .

Design of a microstructured reactor with integrated heat-exchanger for optimum performance of a highly exothermic reaction

J. C. Schouten, M.H.J.M. de Croon, Evgeny V. Rebrov, 2001 .

Gas–liquid dynamics at low Reynolds numbers in pillared rectangular micro channels

J. van der Schaaf, J. C. Schouten, R. M. Tiggelaar, 2010 .