Angelo Mazzu

发表

Damage evolution in a rail steel: investigation on RCF and wear competition

Candida Petrogalli, Roberto Roberti, Michela Faccoli, 2007 .

Valorisation of crude earth as sustainable building material: a case of international cooperation in the Logone Valley (Chad–Cameroon)

Angelo Mazzu, Francesco Vitali, Jean Pierre Temga, 2014 .

Improved cookstove as an appropriate technology for the Logone Valley (Chad – Cameroon): Analysis of fuel and cost savings

Mentore Vaccari, Angelo Mazzu, Francesco Vitali, 2012 .

Extension to finite life of a failure assessment diagram for contact fatigue loading

Giorgio Donzella, Angelo Mazzu, 2012 .

The competitive role of wear and RCF in a rail steel

Roberto Roberti, Michela Faccoli, Giorgio Donzella, 2005 .

Using vibrations to detect high wear rates in rolling contact fatigue tests

Candida Petrogalli, Luigi Solazzi, Simone Pasinetti, 2015 .

Vibration measurements for contact topology assessment in a rolling contact fatigue bench

Candida Petrogalli, Luigi Solazzi, Simone Pasinetti, 2014 .

An engineering investigation on the Bronze Age crossbar wheel of Mercurago

Simone Pasinetti, Giovanna Sansoni, Ileana Bodini, 2017 .

Study, design and prototyping of an animal traction cam based press for biomass densification

Angelo Mazzu, 2007 .

K-means clustering approach for damage evolution monitoring in RCF tests

Candida Petrogalli, Luigi Solazzi, Giovanna Sansoni, 2018 .

Competition between wear and rolling contact fatigue at the wheel—rail interface: some experimental evidence on rail steel

Candida Petrogalli, Giorgio Donzella, Angelo Mazzu, 2009 .

Design of a Press for Densification of Waste Biomass in Developing Countries

Angelo Mazzu, 2010 .

A biomass powered Ringbom-Stirling engine for developing countries: a low-budget solution for distributed electricity generation.

Adriano Maria Lezzi, Costante Mario Invernizzi, Angelo Mazzu, 2010 .

Experimentation of an appropriate technology of biomass recovery for artisanal food transformation in Senegal

Angelo Mazzu, Sabrina Sorlini, P. Zambetti, 2005 .

An experimental procedure for surface damage assessment in railway wheel and rail steels

Candida Petrogalli, Luigi Solazzi, Matteo Lancini, 2015 .

Evaluation of wear in rolling contact tests by means of 2D image analysis

Candida Petrogalli, Simone Pasinetti, Giovanna Sansoni, 2018 .

Progressive damage assessment in the near-surface layer of railway wheel–rail couple under cyclic contact

Candida Petrogalli, Roberto Roberti, Michela Faccoli, 2011 .

Influence of inclusion content on rolling contact fatigue in a gear steel: Experimental analysis and predictive modelling

Candida Petrogalli, Michela Faccoli, Giorgio Donzella, 2011 .

Failure assessment of subsurface rolling contact fatigue in surface hardened components

Candida Petrogalli, Giorgio Donzella, Angelo Mazzu, 2013 .

A simplified non-linear kinematic hardening model for ratchetting and wear assessment in rolling contact

Angelo Mazzu, A. Mazzù, 2008 .

Subcase crack propagation threshold and microhardness profile influence in rolling contact fatigue of carburised components

Luigi Solazzi, Giorgio Donzella, Angelo Mazzu, 2001 .

Surface and Subsurface Cracks in Rolling Contact Fatigue of Hardened Components

Giorgio Donzella, Angelo Mazzu, G. Donzella, 2002 .