D. Bae

发表

Evaluation on defect in the weld of stainless steel materials using nondestructive technique

Joon-Hyun Lee, Jin Kyung Lee, D. Bae, 2014 .

Acoustic emisson and ultrasonic wave characteristics in TIG-welded 316 stainless steel

Sang Pill Lee, Joon-Hyun Lee, Joon-Hyun Lee, 2014, Metals and Materials International.

Effect of tensile properties on the abrasive wear of steel saw wires used for silicon ingot slicing

Y. Cho, K. Kim, D. Bae, 2012 .

Thermal shock properties of 2D-SiCf/SiC composites

A. Kohyama, I. Son, Jin-Kyung Lee, 2012 .

Corrosion Resistance and Mechanical Properties of Carbon Steel under a High Temperature Pressurized Water

Joon-Hyun Lee, Jin Kyung Lee, D. Bae, 2007 .

Effect of Hydrogen Charging on the Mechanical Properties of 304 Stainless Steels

I. Son, Jin-Kyung Lee, D. Bae, 2015 .

Microstructure and Wear Behavior of TiC/AISI 1020 Metal Matrix Composites Produced by Liquid Pressing Infiltration

I. Jo, Heejeong Kim, Seungchan Cho, 2021, Applied Sciences.

Nondestructive evaluation on hydrogen effect of 316 L stainless steel

Joon-Hyun Lee, Jin-Kyung Lee, D. Bae, 2016 .

Evaluation on hydrogen embrittlement of material using nondestructive test

Joon-Hyun Lee, S. Nahm, I. Son, 2014 .

Development of New Bimetal Material for Home Appliances by Using the Rolling Process

J. H. Lee, D. Bae, D. Bae, 2007 .

Electronic States Calculation of Cobalt by Using the DV-Xα Cluster Method

H. Yukawa, Y. Murata, M. Morinaga, 2001 .

Spontaneous formation of boron nitride nanotube fibers by boron impurity reduction in laser ablation of ammonia borane

Kun-Hong Lee, K. Kim, Homin Shin, 2022, Nano Convergence.

In-Situ Electrical Resistance and Microstructure for Ultra-Thin Metal Film Coated by Magnetron Sputtering

Y. Cho, D. Bae, B. Hwang, 2011 .

TEM investigation of the interaction between dislocation and nitride precipitates in deformed high manganese–chromium austenitic steels

D. Bae, K. Miyahara, M. Hong, 2003 .

Nondestructive technique application for corrosion evaluation by hydrogen charging of stainless steel

Joon-Hyun Lee, D. Bae, Sang Pill Lee, 2016 .

Effect of aging treatment on irradiation-induced segregation of high Mn-Cr steel

Y. Cho, Heishichiro Takahashi, D. Bae, 2011 .

Effect of Electrochemical Hydrogen Charging Time on Hydrogen Embrittlement of the Hot-Rolled and Accelerated Cooling Treated API X70 Steel

S. Nahm, I. Jo, D. Bae, 2021, Metals and Materials International.

Effect of highly pressurized hydrogen gas charging on the hydrogen embrittlement of API X70 steel

Y. Cho, S. Nahm, I. Son, 2014, Metals and Materials International.

Characterization of SiCf/SiC and CNT/SiC composite materials produced by liquid phase sintering

J. Byun, D. Bae, Sang-Pill Lee, 2011 .

High temperature characterization of reaction sintered SiC based materials

A. Kohyama, Y. Katoh, D. Bae, 2004 .

HIGH TEMPERATURE EROSION BEHAVIOR OF C/SiC COMPOSITE MANUFACTURED BY MELT SILICON INFILTRATION PROCESS

Soon Kuk Kim, J. Jeon, D. Bae, 2006 .

Fabrication of liquid phase sintered SiC materials and their characterization

Akira Kohyama, Dong-Su Bae, A. Kohyama, 2006 .

Identification of the intermetallic compound layer formed at the interface of roll-bonded aluminum-clad steel by thermal annealing

Y. Cho, D. Bae, K. Hui, 2014, Metals and Materials International.

Evaluation of the cross-plane thermal conductivity of double-layer materials

Y. Cho, B. Hahn, D. Bae, 2017 .

Properties of MoSi2 Based Composite Materials

Jin-Kyung Lee, D. Bae, Sang-Pill Lee, 2009 .

Improvement of high temperature strength and low temperature toughness of high manganese-chromium austenitic steels

D. Bae, K. Miyahara, Yukio Shimoide, 1994 .

Effect of hydro co-extrusion on microstructure of duo-cast Al 3003/Al 4004 clad materials

Yong Bae Kim, I. Son, Jin-Kyung Lee, 2014 .

Improvement of High Temperature Strength and Toughness of 12mass%Cr-15mass%Mn Austenitic Steels Developed as a Heat Resisting Material

D. Bae, K. Miyahara, Yukio Shimoide, 1995 .

Effect of He-pre-injection on dislocation loop formation and irradiation-induced segregation of Fe–12%Cr–15%Mn austenitic steel

Heishichiro Takahashi, S. Nahm, Jin-Kyung Lee, 2012 .

Effects of nitride distribution on internal stress during high temperature deformation of 12%Cr–15%Mn austenitic steels

D. Bae, K. Miyahara, 1995 .

Effect of fine vanadium nitride precipitates on internal stress during high-temperature creep of 12%Cr-15%Mn steels

D. Bae, K. Miyahara, 1994 .

Low Temperature Fracture Behavior of 12%Cr-15%Mn Austenitic Steels

D. Bae, K. Miyahara, Y. Hosoi, 1993 .

Effect of He-injection on irradiation damage in heat affected zone of welded SUS304 steel

T. Shibayama, Heishichiro Takahashi, D. Bae, 2004 .

Effect of electron-beam irradiation temperature on irradiation damage of high Mn–Cr steel

T. Shibayama, S. Nahm, D. Bae, 2004 .

Effect of bonding interface on delamination behavior of drawn Cu/Al bar clad material

Yong Bae Kim, D. Bae, Jongsup Lee, 2012 .

EFFECT OF TEST TEMPERATURE ON THE CHARACTERIZATION OF MELT INFILTRATED SiC/SiC COMPOSITES

A. Kohyama, Jin-Kyung Lee, D. Bae, 2006 .

Study on Hydrogen Effect in TIG Welded Stainless Steel

Joon-Hyun Lee, Jin-Kyung Lee, D. Bae, 2016 .

Evaluation of intermediate phases formed on the bonding interface of hot pressed Cu/Al clad materials

G. Lee, D. Bae, Jongsup Lee, 2016, Metals and Materials International.

Application of Nondestructive Technique on Hydrogen Charging Times of Stainless Steel 304L

Y. Son, Jin-Kyung Lee, D. Bae, 2015 .

Interface Properties of Copper/Aluminum/Stainless Steel Clad Materials

Tamaki Shibayama, D. Bae, T. Shibayama, 2007 .

Microstructure and thermal shock property of liquid phase sintered Cf/SiC composites

J. Byun, I. Son, D. Bae, 2012 .

Microstructure and Mechanical Property of SiCf/SiC and Cf/SiC Composites

J. Byun, D. Bae, S. P. Lee, 2011, International Conference on Microelectronics Systems Education.

Effect of Post Heat Treatment on Bonding Interfaces in Ti/Mild steel/Ti Clad Materials

Y. Lee, Sang-Kon Lee, D. Bae, 2011 .

Electronic States Calculation of Fe4N by DV-Xα cluster calculation

In-Seop Lee, D. Bae, Dong-Won Song, 2002 .

Effect of aging treatment on bonding interface properties of hot-pressed Cu/Al clad material

Y. Cho, G. Lee, I. Son, 2015 .

Effect of aging treatment on bonding interface properties of hot-pressed Cu/Al clad material

G. Lee, I. Son, Jin-Kyung Lee, 2015, International Journal of Precision Engineering and Manufacturing.

Effect of Post Heat Treatment on Bonding Interfaces in Ti/STS409L/Ti Cold Rolled Clad Materials

M. J. Kim, J. Park, C. Kang, 2011 .

Effect of Post Heat Treatment Temperature on Interface Diffusion Layer and Bonding Force in Roll Cladded Ti/Mild steel/Ti Material

Yong Bae Kim, D. Bae, G. Lee, 2012 .

Change of Microstructure and Hardness of Duo-Casted Al3003/Al4004 Clad Material during Extrusion Process

I. Jo, Jin-Kyung Lee, D. Bae, 2020, Metals.

Effect of electron irradiation on microstructural damage in the welded portion of a SUS304 weldment

S. K. Kim, T. Shibayama, Heishichiro Takahashi, 2006 .

HVEM irradiation damage in heat affected zone of welded SUS304 steel

Heishichiro Takahashi, D. Bae, H. Kinoshita, 2002 .