Fei Peng

发表

Fabricating ceramics with embedded microchannels using an integrated additive manufacturing and laser machining method

J. Tong, Hai Xiao, Michael Heim, 2018, Journal of the American Ceramic Society.

Laser-assisted embedding of all-glass optical fiber sensors into bulk ceramics for high-temperature applications.

J. Tong, Yang Song, Hai Xiao, 2020, Optics and laser technology.

Chemically Inert Hydrocarbon-Based Slurries for Rapid Laser Sintering of Thin Proton-Conducting Ceramics

J. Tong, Jun Gao, Hai Xiao, 2021 .

Rapid Laser Processing of Thin Sr‐Doped LaCrO 3– δ Interconnects for Solid Oxide Fuel Cells

J. Tong, Hai Xiao, K. Brinkman, 2020, Energy Technology.

A Novel Laser 3D Printing Method for the Advanced Manufacturing of Protonic Ceramics

J. Tong, Hai Xiao, K. Brinkman, 2020, Membranes.

Rapid Laser Reactive Sintering for Sustainable and Clean Preparation of Protonic Ceramics

J. Tong, Minda Zou, Hai Xiao, 2020, ACS omega.

Dip coating of cylinders with Newtonian fluids.

K. Kornev, Fei Peng, Zhao Zhang, 2021, Journal of colloid and interface science.

Direct inkjet printing of mullite nano-ribbons from the sol–gel precursor

J. Tong, K. Kornev, Hai Xiao, 2020, Journal of Sol-Gel Science and Technology.

Direct inkjet printing of miniaturized luminescent YAG:Er3+ from sol-gel precursor

Dong Xu, A. Trofimov, K. Kornev, 2017 .

Signal sensitivity of alternating current potential drop measurement for crack detection of conductive substrate with tunable coating materials through finite element modeling

B. Zhang, Ming Liu, Fei Peng, 2016 .

Dense and crack-free mullite films obtained from a hybrid sol–gel/dip-coating approach

I. Luzinov, K. Kornev, R. Burtovyy, 2017 .

The effect of polymer additives on the critical thicknesses of mullite thin films obtained from the monophasic sol–gel precursors

Dong Xu, I. Luzinov, K. Kornev, 2016, Journal of Sol-Gel Science and Technology.

Normal and Abnormal Grain Growths in BaTiO3 Fibers

Fei Peng, Zhaoxi Chen, 2014 .

Fabrication of CeO2 microspheres by sol−gel reaction with polymerization via single emulsion

Yuzhe Hong, Fei Peng, J. Ma, 2022, Nuclear Analysis.

Electrospun mullite fibers from the sol–gel precursor

I. Luzinov, M. Fang, K. Kornev, 2015, Journal of Sol-Gel Science and Technology.

Permeation and optical properties of YAG:Er3+ fiber membrane scintillators prepared by novel sol–gel/electrospinning method

Dong Xu, A. Trofimov, K. Kornev, 2017, Journal of Sol-Gel Science and Technology.

Ultra‐fast, selective, non‐melting, laser sintering of alumina with anisotropic and size‐suppressed grains

J. Tong, Hai Xiao, R. Bordia, 2021, Journal of the American Ceramic Society.

Mullite-Nickel Magnetic Nanocomposite Fibers Obtained from Electrospinning Followed by Thermal Reduction

I. Luzinov, K. Kornev, Yu Gu, 2016 .

Kinetics of evaporation and gel formation in thin films of ceramic precursors.

N. Borodinov, I. Luzinov, K. Kornev, 2014, Langmuir : the ACS journal of surfaces and colloids.

Thick Er-doped silica films sintered using CO2 laser for scintillation applications

A. Trofimov, Hai Xiao, R. Bordia, 2017 .

Magnetic Submicron Mullite Coatings with Oriented SiC Whiskers.

I. Luzinov, K. Kornev, R. Burtovyy, 2018, ACS applied materials & interfaces.

Non-stoichiometry Effects and Phase Equilibria in the Uranium-Carbon-Nitrogen Ternary System

K. Kornev, Fei Peng, K. Rider, 2020, Metallurgical and Materials Transactions A.

One‐Step Fabrication of Nanocrystalline Nanonetwork SnO2 Gas Sensors by Integrated Multilaser Processing

J. Tong, Yizheng Chen, Hai Xiao, 2020, Advanced Materials Technologies.

Ultra-Fast Laser Fabrication of Alumina Micro-Sample Array and High-Throughput Characterization of Microstructure and Hardness

Hai Xiao, R. Bordia, Fei Peng, 2021, Crystals.

Machine learning-based microstructure prediction during laser sintering of alumina

J. Tong, Hai Xiao, Fei Peng, 2021, Scientific Reports.

The effect of laser sintering on the microstructure, relative density, and cracking of sol-gel-derived silica thin films.

J. Tong, Hai Xiao, R. Bordia, 2019, Journal of the American Ceramic Society. American Ceramic Society.

Sol-gel fabrication of porous ceria microspheres for thermochemical carbon dioxide (CO2) splitting

J. Tong, Hai Xiao, Fei Peng, 2023, Nuclear Analysis.

Porous Zr-Doped Ceria Microspheres for Thermochemical Splitting of Carbon Dioxide

J. Tong, Fei Peng, Jie Chen, 2021, ACS Applied Energy Materials.

Machine Learning-based Microstructure Prediction During Laser Sintering of Alumina: A Conditional Generative Approach

Hai Xiao, Jianan Tang, Xiao Geng, 2021 .

Measuring flexural rigidity of mullite microfibers using magnetic droplets

I. Luzinov, K. Kornev, Yu Gu, 2015 .

Engineering of microstructures of protonic ceramics by a novel rapid laser reactive sintering for ceramic energy conversion devices

J. Tong, T. Hong, Hai Xiao, 2018, Solid State Ionics.

Rapid laser reactive sintering of BaCe0.7Zr0.1Y0.1Yb0.1O3-δ electrolyte for protonic ceramic fuel cells

J. Tong, Minda Zou, Hai Xiao, 2020, Journal of Power Sources Advances.

3D Printing Enabled Highly Scalable Tubular Protonic Ceramic Fuel Cells

J. Tong, Minda Zou, K. Brinkman, 2023, ACS Energy Letters.

Additive Manufacturing of Fused Silica Glass Using Direct Laser Melting

Hai Xiao, Jincheng Lei, Qi Zhang, 2019, 2019 Conference on Lasers and Electro-Optics (CLEO).

Making droplets from highly viscous liquids by pushing a wire through a tube

K. Kornev, Fei Peng, J. Ma, 2022, Physics of Fluids.