Yihang Fan

发表

Dynamic behavior description and three-dimensional cutting simulation of SiCp/Al composites with high volume fraction

Jieqiong Lin, Yihang Fan, Yongshuo Xu, 2022, Journal of Manufacturing Processes.

Failure feature and characterization of material of shear band in cutting Inconel718

Niaona Zhang, Yihang Fan, Zhaopeng Hao, 2019, Journal of Manufacturing Processes.

Influence of anisotropy of nickel-based single crystal superalloy in atomic and close-to-atomic scale cutting

Yihang Fan, Zhaopeng Hao, Zaizhen Lou, 2020 .

Research on Cutting Performances of Tool Rounded Cutting Edge in High Speed Milling Hardened Steel

M. Zheng, Yihang Fan, Shucai Yang, 2011 .

Wear characteristics and wear control method of PVD-coated carbide tool in turning Inconel 718

Jieqiong Lin, Yihang Fan, Zhaopeng Hao, 2015 .

Finite Element Analysis of the Influence of Cutting Edge Radius on Mechanical-Thermal Distribution in High-Speed Cutting TiAl6v4

Wei Zhang, M. Zheng, Yihang Fan, 2010 .

Formation mechanism and characterization of shear band in high-speed cutting Inconel718

Yihang Fan, Zhaopeng Hao, RuiRui Cui, 2018, The International Journal of Advanced Manufacturing Technology.

Static and Dynamic Characteristic of Cutting Force when High-Efficiency Cutting Ti-6Al-4V

M. Zheng, Yihang Fan, Shucai Yang, 2011 .

Research of plastic behavior in high-speed cutting Inconel718 based on multi-scale simulation

Yihang Fan, Zhaopeng Hao, Tao Wang, 2018 .

Research on Deformation Mechanism of Cutting Nickel-Based Superalloy Inconel718 Based on Strain Gradient Theory

Yihang Fan, Zhaopeng Hao, Jining Li, 2021 .

Cutting mechanism of enhanced phase γ' in Inconel 718 based on strain gradient theory

Yihang Fan, Zhaopeng Hao, Jining Li, 2021, The International Journal of Advanced Manufacturing Technology.

Wear mechanism of nanotwinned cBN tools in nano-cutting Ni-Cr-Fe alloy by molecular dynamics simulation

Han Zhang, Yihang Fan, Zhaopeng Hao, 2022, Journal of Manufacturing Processes.

Mechanical response of nanoindentation and material strengthening mechanism of nt-cBN superhard materials based on molecular dynamics

Yihang Fan, Zhaopeng Hao, Hang Zhang, 2022, International Journal of Refractory Metals and Hard Materials.

Cutting Performance of Cemented Carbide Tool in High-Efficiency Turning Ti6Al4V

S. Wang, Zhe Li, M. Zheng, 2012 .

Study on phase transformation in cutting Ni-base superalloy based on molecular dynamics method

Yihang Fan, Zhaopeng Hao, Zaizhen Lou, 2020 .

Material dynamic behavior in cutting zone of Inconel 718 and its influence on cutting process

Yihang Fan, Zhaopeng Hao, Gang Cheng, 2022, Archives of Civil and Mechanical Engineering.

Study on constitutive model and deformation mechanism in high speed cutting Inconel718

Yihang Fan, Zhaopeng Hao, FangFang Ji, 2019, Archives of Civil and Mechanical Engineering.

Research on tool wear based on multi-scale simulation in high speed cutting Inconel718

He Lan, Yihang Fan, Zhaopeng Hao, 2018, Archives of Civil and Mechanical Engineering.

Study on staged work hardening mechanism of nickel-based single crystal alloy during atomic and close-to-atomic scale cutting

Yihang Fan, Zhaopeng Hao, Zaizhen Lou, 2021 .

New observations on wear mechanism of self-reinforced SiAlON ceramic tool in milling of Inconel 718

Jieqiong Lin, Yihang Fan, Zhaopeng Hao, 2017 .

Dynamic plastic evolution mechanism in cutting zone of nickel-based superalloy GH4169

Yihang Fan, Zhaopeng Hao, Gang Cheng, 2023, Journal of Materials Processing Technology.

Research on surface roughness prediction in turning Inconel 718 based on Gaussian process regression

Yihang Fan, Zhaopeng Hao, Gang Cheng, 2022, Physica Scripta.

Diffusion mechanism of tools and simulation in nanoscale cutting the Ni–Fe–Cr series of Nickel-based superalloy

Jieqiong Lin, Yihang Fan, Zhaopeng Hao, 2019, International Journal of Mechanical Sciences.

Surface residual stress in high speed cutting of superalloy Inconel718 based on multiscale simulation

Liu Rongli, Yihang Fan, Zhaopeng Hao, 2018 .

Interface Bonding Mechanism of Ti3Al0.125Cr0.875 N/WC Carbide: A First Principles Study

Yihang Fan, Zhaopeng Hao, Wencang Fu, 2022, Journal of Materials Engineering and Performance.

Work hardening mechanism based on molecular dynamics simulation in cutting Ni–Fe–Cr series of Ni-based alloy

Yihang Fan, Zhaopeng Hao, Wenyuan Wang, 2020 .

Wear characteristics of cemented carbide tool in dry-machining Ti-6Al-4V

M. Zheng, Yihang Fan, Zhaopeng Hao, 2016 .

New observations on tool wear mechanism in dry machining Inconel718

D. Gao, R. Han, Yihang Fan, 2011 .

Tribological characteristics and wear mechanism of cemented carbide tool in dry machining Ti-6Al-4V

Jieqiong Lin, Yihang Fan, Zhaopeng Hao, 2017 .

Study of surface quality in machining nickel-based alloy Inconel 718

F. Sun, M. Zheng, Yihang Fan, 2013 .

New observations on tool wear mechanism in machining Inconel 718 under water vapor + air cooling lubrication cutting conditions

ZhaoPeng Hao, YiHang Fan, Jieqiong Lin, 2015 .

Cutting Parameter Optimization Based on Optimal Cutting Temperature in Machining Inconel718

D. Gao, Yong Lu, Yihang Fan, 2012 .

First-principles calculations of a new half-metallic Heusler alloy FeCrAs

Lili Wang, Ran Liu, Yihang Fan, 2020 .

Physically Based Constitutive Model for Viscoplastic Deformation of Inconel718 at High Strain Rates and Temperatures

Xiaoqin Zhou, Jieqiong Lin, Yihang Fan, 2020 .

Flow characteristics and constitutive equations of flow stress in high speed cutting Alloy 718

Jieqiong Lin, Yihang Fan, Zhaopeng Hao, 2017 .

Microscopic Study on the Mechanism of Tool Bond Wear in Cutting Ni–Fe-Cr-Co–Cu Series Nickel-Base Superalloy

Yihang Fan, Zhaopeng Hao, Zaizhen Lou, 2021, International Journal of Precision Engineering and Manufacturing.

Ferromagnetic exchange mechanism and martensitic transformation of Heusler alloy based on d-band center theory

Ran Liu, Yihang Fan, Zhaopeng Hao, 2021 .

Effect of pulsed current on plastic deformation of Inconel 718 under high strain rate and high temperature conditions

Yihang Fan, Zhaopeng Hao, Huiyou Fan, 2023, Journal of Alloys and Compounds.

Research of plastic behavior in high-speed cutting Inconel718 based on multi-scale simulation

Yihang Fan, Zhaopeng Hao, Tao Wang, 2017, The International Journal of Advanced Manufacturing Technology.

Modification Mechanism and Method in Doping Co Atom Intog-C3N4 Based on the First Principle Calculation

Ran Liu, Yihang Fan, Zhaopeng Hao, 2023, JOM.

Theoretical Calculation and Analysis of Physical and Mechanical Properties of WC-Co Cemented Carbide with Lanthanum

Yihang Fan, Zhaopeng Hao, Weihe Wang, 2023, Journal of Materials Engineering and Performance.

Research on Machined Surface Morphology of Hardened Steels Based on Machining Feature

Yongda Yan, S. Wang, B. Jiang, 2014 .

Modeling and Simulation Based on Morphology of Machined Surface in High-speed Milling

Yongda Yan, S. Wang, B. Jiang, 2014 .

Research on the dynamic plasticity mechanism of additive manufactured nickel–chromium–molybdenum corrosion-resistant alloy steel under impact load

Jincan Hu, Yihang Fan, Zhaopeng Hao, 2023, Engineering Failure Analysis.

Effect of Workpiece Atom Diffusion Into CBN Tool on Its Mechanical Properties in Cutting Ni–Fe–Cr Alloy Based on Molecular Dynamics Simulation

Yihang Fan, Zhaopeng Hao, Hengyi Yuan, 2021, International Journal of Precision Engineering and Manufacturing.

Cutting performance of the nanotwinned cBN tool in nano-cutting of Ni-Cr-Fe alloy

Han Zhang, Yihang Fan, Zhaopeng Hao, 2023, Journal of Manufacturing Processes.

Diffusion mechanism in cutting Ni-based alloy containing γ′ phase (Ni3Al) with CBN tool based on MD simulation

Yihang Fan, Zhaopeng Hao, Wenyuan Wang, 2021 .

A GND simulation model for micro-deformation mechanism analyses in high-speed cutting Inconel718

Bin Wang, Yihang Fan, Zhaopeng Hao, 2023, The International Journal of Advanced Manufacturing Technology.

Research on tool stick-slip erosion wear mechanism in cutting nickel-based alloy GH4169

Yihang Fan, Zhaopeng Hao, Lijia Li, 2023, Tribology International.

Overview of research on machining mechanism of aluminum-based silicon carbide composites (SiCp/Al)

Yihang Fan, Yongshuo Xu, zhaopeng hao, 2024, The International Journal of Advanced Manufacturing Technology.