K. Rohwer

发表

Electrical conductivity of amorphous hydrogenated carbon

D. Meissner, P. Hammer, A. Helmbold, 1995 .

Higher-order theories for thermal stresses in layered plates

Raimund Rolfes, Klaus Rohwer, Holger Sparr, 2001 .

MODELS AND TOOLS FOR HEAT TRANSFER, THERMAL STRESSES, AND STABILITY OF COMPOSITE AEROSPACE STRUCTURES

R. Rolfes, J. Tessmer, K. Rohwer, 2003 .

Calculating 3D stresses in layered composite plates and shells

Raimund Rolfes, Klaus Rohwer, R. Rolfes, 1998 .

Spring-in and Warpage — Progress in Simulating Manufacturing Aspects

E. Kappel, D. Stefaniak, K. Rohwer, 2013, Mechanics of Composite Materials.

Analysis of the deformation energy of straight composite z-frames subjected to critical buckling loads

C. Hühne, M. Wiedemann, K. Rohwer, 2015 .

Efficient calculation of transverse stresses in composite plates

A. Noor, R. Rolfes, K. Rohwer, 1997 .

Experiments on buckling and postbucklingof thin-walled CFRP structures

R. Degenhardt, K. Rohwer, D. Wilckens, 2009 .

Electrical characterization of plasma-deposited hydrogenated amorphous carbon films

D. Meissner, P. Hammer, A. Helmbold, 1991 .

Synthesis and magnetic properties of transition metal cyclotetraphosphates M2P4O12 (M = Mn, Co, Ni, Cu)

A. Wiedenmann, K. Rohwer, A. Zimmermann, 1989 .

Determination of the correlation between the crystal field axis system and the crystallographic axes in chromium‐doped β‐Ga2O3 by EPR

K. Rohwer, W. Gunsser, 1983 .

Tetrametaphosphates — a new quasi-one-dimensional magnetic system

A. Wiedenmann, K. Rohwer, W. Gunsser, 1986 .

Plot program for Laue patterns of single crystals in arbitrary orientation

K. Rohwer, W. Gunsser, 1983 .

Models for Intralaminar Damage and Failure of Fiber Composites - A Review

Klaus Rohwer, K. Rohwer, 2016 .

Degradation investigation in a postbuckling composite stiffened fuselage panel

Richard Degenhardt, Javid Bayandor, Rodney S. Thomson, 2008 .

Investigations on imperfection sensitivity and deduction of improved knock-down factors for unstiffened CFRP cylindrical shells

Richard Degenhardt, Rolf Zimmermann, Luise Kärger, 2010 .

Efficient linear transverse normal stress analysis of layered composite plates

Raimund Rolfes, Klaus Rohwer, R. Rolfes, 1998 .

Improved transverse shear stresses in composite finite elements based on first order shear deformation theory

Raimund Rolfes, Klaus Rohwer, R. Rolfes, 1997 .

Buckling of axially compressed CFRP cylinders with and without additional lateral load: Experimental and numerical investigation

Richard Degenhardt, Regina Khakimova, Saullo G.P. Castro, 2017 .

On the analysis of the buckling behaviour of laminated composite plates and shells

Klaus Rohwer, Bodo Geier, K. Rohwer, 1989 .

Simulation of Fiber Composites – An Assessment

Klaus Rohwer, K. Rohwer, 2013 .

POSTBUCKLING ANALYSIS OF COMPOSITE SHELL STRUCTURES: TOWARD FAST AND ACCURATE TOOLS WITH IMPLICIT FEM METHODS

Richard Degenhardt, Silvio Merazzi, Mathias Doreille, 2010 .

Micromechanical curing stresses in CFRP

Klaus Rohwer, K. Rohwer, Xie Ming Jiu, 1986 .

Piezothermoelastic Modeling and Active Vibration Control of Laminated Composite Beams

S. Raja, K. Rohwer, M. Rose, 1999 .

Design and analysis of stiffened composite panels including post-buckling and collapse

Richard Degenhardt, Rodney S. Thomson, Alexander Kling, 2008 .

Buckling of axially compressed CFRP truncated cones with additional lateral load: Experimental and numerical investigation

Richard Degenhardt, Rolf Zimmermann, Regina Khakimova, 2016 .

EXPERIMENTS ON BUCKLING AND POSTBUCKLING OF THIN-WALLED CFRP STRUCTURES USING ADVANCED MEASUREMENT SYSTEMS

Richard Degenhardt, Rolf Zimmermann, Wolfgang Hillger, 2007 .

Electrical and optical properties of plasma-deposited amorphous hydrocarbon films

D. Meissner, T. Frauenheim, P. Hammer, 1991 .

A three-layered sandwich element with improved transverse shear stiffness and stresses based on FSDT

Raimund Rolfes, Luise Kärger, Klaus Rohwer, 2006 .

Ambiguous doping effects in amorphous hydrogenated carbon films prepared by PACVD

D. Meissner, P. Hammer, A. Helmbold, 1994 .

Predicting fiber composite damage and failure

Klaus Rohwer, K. Rohwer, 2015 .

Stimulating the realistic worst case buckling scenario of axially compressed unstiffened cylindrical composite shells

Christian Hühne, Klaus Rohwer, H.N.R. Wagner, 2017 .

COCOMAT—improved material exploitation of composite airframe structures by accurate simulation of postbuckling and collapse

Richard Degenhardt, Raimund Rolfes, Rolf Zimmermann, 2006 .

Application of higher order theories to the bending analysis of layered composite plates

K. Rohwer, K. Rohwer, 1992 .

COCOMAT - Improved Material Exploitation at Safe Design of Composite Airframe Structures by Accurate Simulation of Collapse

Richard Degenhardt, Raimund Rolfes, Rolf Zimmermann, 2004 .

Analyzing Laminated Structures from Fibre-Reinforced Composite Material - An Assessment

Klaus Rohwer, Stefan Dipl.-Ing. Friedrichs, Christof Dipl.-Ing. Wehmeyer, 2005 .

Damage and Failure Conditions for Continuous Fibre Composites

K. Rohwer, 2016 .

A new strength model for application of a physically based failure criterion to orthogonal 3D fiber reinforced plastics

Raimund Rolfes, Klaus Rohwer, J. Juhasz, 2001 .

Improved Material Exploitation of Composite Airframe Structures by Accurate Simulation of Postbuckling and Collapse – The Projects POSICOSS and COCOMAT

Richard Degenhardt, Raimund Rolfes, Rolf Zimmermann, 2005 .

Cyclic buckling tests of pre-damaged CFRP stringer stiffened panels

Richard Degenhardt, Rolf Zimmermann, Klaus Rohwer, 2010 .

Experiments to Detect Damage Progression in Axially Compressed CFRP Panels under Cyclic Loading

Richard Degenhardt, Wolfgang Hillger, Alexander Kling, 2008 .

Probabilistic Approach for better Buckling Knock-down Factors of CFRP Cylindrical Shells - Tests and Analyses

Richard Degenhardt, Rolf Zimmermann, Alexander Kling, 2007 .

SIMULATING POSTBUCKLING BEHAVIOUR AND COLLAPSE OF STIFFENED CFRP PANELS

R. Degenhardt, K. Rohwer, 2007 .

Future design scenario for composite airframe panels

Richard Degenhardt, Alexander Kling, Klaus Rohwer, 2006 .

Design and Analysis of Composite Panels

Richard Degenhardt, Klaus Rohwer, Alexander Kling, 2006 .

Preparation and Characterization of Doped a-C:H Films

D. Meissner, D. Bahnemann, P. Hammer, 1991 .

Buckling analysis of discretely stiffened composite curved panels under compression and shear

K. Rohwer, B. Geier, X. Tong, 1986 .