C. Kao

发表

Kao, Chih-Chuan and Thomason, James (2014) Regeneration Of Thermally Recycled Glass Fibre For Cost-Effective Composite Recycling : Performance of fibre recyclates from thermoset composites and with subsequent ReCoVeR treatments. In: 16th European Conference on Composite Materials, 2014-06-22-2014-06

J. Thomason, C. Kao, 2018 .

Recover : Regenerating the strength of glass fibres thermally recycled from end-of-life

Liu Yang, J. Thomason, C. Kao, 2015 .

Regeneration Of Thermally Recycled Glass Fibre For Cost-Effective Composite Recycling : Overview of the ReCoVeR projects

Liu Yang, J. Thomason, C. Kao, 2014 .

REGENERATION OF THERMALLY RECYCLED GLASS FIBRE FOR COST-EFFECTIVE COMPOSITE RECYCLING: PERFORMANCE OF FIBRE RECYCLATES FROM THERMOSET COMPOSITES AND WITH SUBSEQUENT ReCoVeR TREATMENTS

J. Thomason, C. Kao, 2014 .

Regeneration of thermally recycled glass fibre for cost-effective composite recycling : Performance of composites based on PP and Recovered glass fibre

James Thomason, Chih-Chuan Kao, J. Thomason, 2014 .

ANALYSIS OF INTERFACIAL PROPERTIES OF SILANE RECOATED GLASS FIBRES RECOVERED FROM HYDROLYSIS PROCESSES

O. Ghita, Y. Shyng, E. Salter, 2012 .

Study on properties of composites reinforced by heat treated glass fibres simulating thermal recycling conditions

J. Thomason, C. Kao, U. Nagel, 2013 .

Assessment of interface damage during the deformation of carbon nanotube composites

R. Young, C. Kao, 2010 .

Deformation Micromechanics of Carbon-Nanotube/Epoxy Composites

R. Young, C. Kao, 2006 .

A Raman spectroscopic investigation of heating effects and the deformation behaviour of epoxy/SWNT composites

R. Young, C. Kao, 2004 .

Mechanical studies of single glass fibres recycled from hydrolysis process using sub-critical water

P. Heard, K. Evans, O. Ghita, 2012 .

Effects of thermal recycling temperatures on the reinforcement potential of glass fibers

Liu Yang, J. Thomason, C. Kao, 2018 .

Incorporating remanufacturing into the end-of-life vehicles directive: current presence and the waste problem

W. Ijomah, D. Paterson, J. Windmill, 2018, Journal of Remanufacturing.

The effective Young's modulus of carbon nanotubes in composites.

S. Eichhorn, R. Young, Libo Deng, 2011, ACS applied materials & interfaces.

The strength of glass fibre reinforcement after exposure to elevated composite processing temperatures

J. Thomason, J. Ure, C. Kao, 2013, Journal of Materials Science.

Modeling the Stress Transfer between Carbon Nanotubes and a Polymer Matrix during Cyclic Deformation

Robert J. Young, R. Young, C. Kao, 2009 .

MECHANICAL CHARACTERISATION OF GLASS FIBRES RECYCLED FROM THERMOSETTING COMPOSITES USING WATER-BASED SOLVOLYSIS PROCESS

K. Evans, O. Ghita, C. Kao, 2011 .

Ultrasonic bulk wave measurements on composite using fiber from recycled CFRP

W. Ijomah, D. Paterson, J. Windmill, 2018 .

Mechanical study on surface treated glass fibres after thermal conditioning

Liu Yang, J. Thomason, J. Ure, 2012 .