A. Kamio

发表

57th World Foundry Congress

A. Kamio, Akihiko Kamio, 1991 .

High resolution electron microscopy of phase decomposition microstructures in aluminium-based alloys

Tatsuo Sato, A. Kamio, 1991 .

Effects of Thermal Residual Stress on Mechanical Properties of SiC Whisker Reinforced Al-Mg and Al-Li Alloys Composites

A. Kamio, Sungkil Hong, H. Tezuka, 1996 .

Analysis of thermal residual stresses in unidirectionally aligned SiCw/Al-alloy matrix composites by X-ray diffraction

A. Kamio, Sungkil Hong, H. Tezuka, 1996 .

Alloys Design of PdTi-Based Shape Memory Alloys Based on Defect Structures and Site Preference of Ternary Elements

H. Hosoda, K. Enami, A. Kamio, 1996 .

Effects of Mg addition on the kinetics of low-temperature precipitation in Al–Li–Cu–Ag–Zr alloys

Tatsuo Sato, A. Kamio, S. Hirosawa, 1998 .

Crystallographic orientation relationship between SiCw and Mg in squeeze-cast SiCw/Mg composites

Douxing Li, M. Zheng, C. Yao, 1999 .

Mechanical Properties and Fracture Process of SiC w /Mg Composites Produced by Squeeze Casting and Extrusion

A. Kamio, S. Chang, H. Tezuka, 1997 .

Evolution of iron aluminide in Al/Fe in situ composites fabricated by plasma synthesis method

S. Kang, Tatsuo Sato, A. Kamio, 2003 .

Fabrication of Al/Al3Fe composites by plasma synthesis method

S. Kang, J. Lee, Tatsuo Sato, 2003 .

Microstructures and Mechanical Properties of Al3Fe Reinforced Aluminum Matrix Composites Fabricated by a Plasma Synthesis Method

S. Kang, Tatsuo Sato, A. Kamio, 2002 .

A new technology for the production of aluminum matrix composites by the plasma synthesis method

S. Kang, A. Kamio, Jung-Moo Lee, 2000 .

Microstructural Changes in Al–Cu–Mn Alloy Reinforced with SiC Particles on Holding at High Temperatures

S. Kang, Tatsuo Sato, A. Kamio, 1999 .

Estimation of defect structures and site-preference of ternary elements in a transition metal trialuminide Al3Nb by pseudo-ground state analysis.

Y. Mishima, H. Hosoda, Tatsuo Sato, 1994 .

Interfacial bond between SiCw and Mg in squeeze cast SiCw/Mg composites

Douxing Li, M. Zheng, C. Yao, 1999 .

The effect of thermal cycling on the mechanical properties of sic whisker reinforced magnesium alloy-based composites

A. Kamio, S. Chang, 1998 .

Mechanism of Macro-segregation Formation in SiC Whisker Reinforced Aluminum Alloys Composites Fabricated by Squeeze Casting

B. Chun, A. Kamio, Sungkil Hong, 1996 .

Al-Cu alloys.

Tatsuo Sato, A. Kamio, S. Kitaoka, 1988 .

Wear characteristics of Al−Si−Mg−(Cu)/Al2O3 composites fabricated by thermit reaction

S. Kim, K. Woo, Tatsuo Sato, 2001 .

Effects of Si and Ti Additions on the Nucleation and Phase Stability of the L12-Type Al3Zr Phase in Al-Zr Alloys

G. Lorimer, Tatsuo Sato, A. Kamio, 1996 .

Effects of particle properties on the microstructure of aluminum based metal–metal composites fabricated by plasma synthesis method

S. Kang, J. Lee, Tatsuo Sato, 2002 .

Dry Sliding Wear Behavior of A2218/Al3Fe Composites Fabricated by Plasma Synthesis Method

S. Kang, J. Lee, Tatsuo Sato, 2002 .

Precipitation Strengthening and Mechanical Properties of Hypereutectic P/M Al-Si-Cu-Mg Alloys Containing Fe and Ni

Tatsuo Sato, A. Kamio, R. Gomes, 1996 .

Precipitation sequence of various kinds of metastable phases in Al-1.0mass% Mg2Si-0.4mass% Si alloy

K. Matsuda, Y. Miyata, S. Ikeno, 2000 .

Crystal structure of the β′′ phase in an Al–l.0mass%Mg2Si–0.4mass%Si alloy

K. Matsuda, S. Ikeno, Tatsuo Sato, 1999 .

High-resolution electron microscopy on the structure of Guinier-Preston zones in an Al-1.6 mass Pct Mg2Si alloy

K. Matsuda, K. Matsuda, S. Ikeno, 1998 .

HRTEM observation of metastable phase in Al-Mg2Si alloys.

K. Matsuda, S. Ikeno, Tatsuo Sato, 1997 .

Comparison between Resistivity Changes and Monte Carlo Simulation for GP Zone Formation in Al–Cu Base Ternary Alloys

Tatsuo Sato, A. Kamio, S. Hirosawa, 1998 .

Classification of the role of microalloying elements in phase decomposition of Al based alloys

H. Flower, Tatsuo Sato, A. Kamio, 2000 .

Effects of Quenching Conditions on Two-Step Aging Behavior of Al-Mg-Si Alloys

Tatsuo Sato, Kentaro Yamada, A. Kamio, 2000 .

Castability of Al-Li alloys.

A. Kamio, Seiji Saikawa, Y. Sugiura, 1991 .

Solidification structure of monotectic alloys

S. Kumai, A. Kamio, H. Tezuka, 1991 .

Unidirectional Solidification Structure of Al–In Monotectic Alloys

S. Kumai, Tsuneo Takahashi, A. Kamio, 1984 .

Model for the calculation of precipitation and recrystallization behavior during the annealing process in copper alloys

Tatsuo Sato, A. Kamio, H. Fujiwara, 1999 .

Microstructures and coarsening behavior of silicon particles in P/M Al–Si–Cu–Mg alloys containing Fe and Ni

Tatsuo Sato, A. Kamio, R. Gomes, 1997 .

Precipitation Behavior of P/M Hypereutectic Al–Si–Cu–Mg Alloys Containing Fe and Ni

Tatsuo Sato, A. Kamio, R. Gomes, 1998 .

Ordered Structures in the Early Stage of Decomposition in an Al-7.9 mol% Li Alloy

Tatsuo Sato, A. Kamio, 1990 .

Low-Temperature Precipitation of Al-Li-Cu Alloys Containing Additional Elements

Tatsuo Sato, A. Kamio, S. Hirosawa, 1996 .

Monotectic Solidification Mechanism of Aluminum Base Alloys

S. Kumai, Tsuneo Takahashi, A. Kamio, 1985 .

Formation Mechanism of the Monotectic Structure in Copper-Base Alloys

S. Kumai, Tsuneo Takahashi, A. Kamio, 1985 .

Formation Manner of Monotectic Structure in Al–In Alloys Solidified Unidirectionally

S. Kumai, Tsuneo Takahashi, A. Kamio, 1984 .

Monotectic Solidification of the Copper-Lead Alloy

A. Kamio, S. Ōya, 1969 .

Unidirectional Solidification Structure of Al-In Monotectic Alloys

S. Kumai, Tsuneo Takahashi, A. Kamio, 1984 .

Decomposition Structures of Rapidly Solidified Al-Cu Alloys

Tsuneo Takahashi, Tatsuo Sato, A. Kamio, 1984 .

Microstructural evolution in P/M hypereutectic Al-Si alloys containing Fe and Ni

T. Kimura, L. Schaeffer, Tatsuo Sato, 2000 .

Metallography of aluminum and it's alloys solidified under high hydrostatic pressure

A. Kamio, E. Ozawa, Y. Matsuura, 1968 .

Mechanical Properties and Structure of Ignition-Proof Mg–Ca–Zr Alloys Produced by Squeeze Casting

A. Kamio, S. Chang, H. Tezuka, 1997 .

A metastable phase having the orthorhombic crystal lattice in an Al-1.0mass% Mg2Si-0.4mass% Si alloy

K. Matsuda, S. Ikeno, Tatsuo Sato, 1996 .

Effect of Hydrogen Gas Content on Generation of Porosity in Al–Li Casting Alloys

A. Kamio, Seiji Saikawa, Y. Sugiura, 1999 .

Crystal system of rod-shaped precipitates in an Al-1.0mass%Mg2Si-0.4mass%Si alloy

K. Matsuda, S. Ikeno, Tatsuo Sato, 1995 .

Ignition prevention of magnesium by simultaneous addition of calcium and zirconium

A. Kamio, Si-Young Chang, H. Tezuka, 1998 .

Aluminum-silicon alloys.

A. Kamio, S. Kitaoka, C. Fujikura, 1988 .

Microstructure and mechanical properties of 8091 Al-Li alloys cast into permanent and sand molds.

A. Kamio, Seiji Saikawa, Y. Sugiura, 1995 .

Electron microscopic analysis of composite precipitates in an Al-2.21WT% Li-0.14WT%Zr alloy

Y. Kato, Tsuneo Takahashi, Tatsuo Sato, 1989 .

The structure and decomposition of Al-Cu alloys rapidly quenched from the liquid state.

Tsuneo Takahashi, Tatsuo Sato, A. Kamio, 1985 .