Hashimoto Shunichi

发表

Effects of Retained Austenite Parameters on Warm Stretch-flangeability in TRIP-aided Dual-phase Sheet Steels

A. Nagasaka, K. Sugimoto, Mitsuyuki Kobayashi, 1999 .

Ductility and Formability of Newly Developed High Strength Low Alloy TRIP-aided Sheet Steels with Annealed Martensite Matrix

A. Kanda, K. Sugimoto, Hashimoto Shunichi, 2002 .

Strain-induced Transformation Behaviour of Retained Austenite and Tensile Properties of TRIP-aided Steels with Different Matrix Microstructure

O. N. Mohanty, M. Mukherjee, K. Sugimoto, 2006 .

Effects of Silicon and Manganese Addition on Mechanical Properties of High-strength Hot-rolled Sheet Steel Containing Retained Austenite

Hashimoto Shunichi, I. Tsukatani, Tsuyoshi Inoue, 1991 .

Acoustic Emission Technique to Study the Effect of Strain Rate on the Deformation Behaviour of TRIP Aided Steels with Different Matrix Microstructures

O. N. Mohanty, M. Mukherjee, K. Sugimoto, 2006 .

Influence of Deformation Temperature on the Bauschinger Effect of a TRIP-Aided Dual-Phase Steel

K. Sugimoto, Mitsuyuki Kobayashi, Hashimoto Shunichi, 1994 .

Effects of Volume Fraction and Stability of Retained Austenite on Ductility of TRIP-aided Dual-phase Steels

Mitsuyuki Kobayashi, Hashimoto Shunichi, Koh-ichi Sugimoto, 1992 .

Effect of Carbon Content on Deep Drawability of TRIP-aided Dual-phase Sheet Steels

A. Nagasaka, K. Sugimoto, Mitsuyuki Kobayashi, 2001 .

Effects of Volume Fraction and Stability of Retained Austenite on Ductility in TRIP-Aided Dual-Phase Steel Sheets

K. Sugimoto, Mitsuyuki Kobayashi, Hashimoto Shunichi, 1992 .

Effect of Mn Content on r-value and Precipitates Morphology in Ti-added Ultra-low Carbon Sheet Steels

Hashimoto Shunichi, R. Yoda, I. Tsukatani, 1998 .

Effects of Hot Rolling Temperature and Solute Carbon on Drawability of Hot Rolled in Ferrite Region and Annealed Sheet Steel

Hashimoto Shunichi, T. Yakushiji, 1988 .

Development of high strength low alloy TRIP-aided steels with annealed martensite matrix

K. Sugimoto, Hashimoto Shunichi, Ryo Kikuchi, 2002 .

Effects of Warm Forming on Stretch-flangeability of a TRIP-aided Dual-phase Sheet Steel

A. Nagasaka, K. Sugimoto, Mitsuyuki Kobayashi, 1997 .

Warm stretch-formability of TRIP-aided dual-phase sheet steels

A. Nagasaka, K. Sugimoto, Mitsuyuki Kobayashi, 1995 .

Formability of Nb bearing ultra high-strength TRIP-aided sheet steels

K. Sugimoto, Hashimoto Shunichi, T. Muramatsu, 2006 .

Effects of Nb and Mo Addition to 0.2%C-1.5%Si-1.5%Mn Steel on Mechanical Properties of Hot Rolled TRIP-aided Steel Sheets

K. Sugimoto, Hashimoto Shunichi, S. Ikeda, 2004 .

780 N/mm2 grade hot-rolled high-strength steel sheet for automotive suspension system

Hashimoto Shunichi, Youichi Mukai, Takahiro Kashima, 2003 .

Effects of Warm Forming on Deep Drawability of a TRIP-aided Dual-phase Sheet Steel

A. Nagasaka, K. Sugimoto, Mitsuyuki Kobayashi, 1999 .

Grain Refinement of High Strength Low Alloy TRIP-aided Ferrous Steels by Thermomechanical Processing in α+γ Region

K. Sugimoto, Hashimoto Shunichi, S. Ikeda, 2003 .

Effect of Morphology of Retained Austenite on Strength and Ductility of TRIP-aided Steel Sheets

K. Sugimoto, Hashimoto Shunichi, Takahiro Kashima, 2002 .

Niobium Bearing Ferrite-Bainite High Strength Hot-rolled Sheet Steel with Improved Formability

Hashimoto Shunichi, M. Sudo, S. Kambe, 1983 .

Stretch-flangeability of High Strength Hot Rolled Steel Sheets with Bainitic-ferrite Microstructure

Hashimoto Shunichi, Takahiro Kashima, 2001 .

Effect of microstructure on mechanical properties of C-Mn high strength hot rolled sheet steel.

Hashimoto Shunichi, Mimura Kazuhiro, M. Sudo, 1986 .

Effects of Metallurgical Factors on Toughness of Flash Welded Joint of Sheet Steel

Hashimoto Shunichi, M. Sudo, 1987 .