Keiji Komatsu

发表

Soft X-ray irradiation effect on the fluorinated DLC film

M. Tagawa, K. Yokota, H. Saitoh, 2017 .

Resistance of Hydrogenated Titanium-Doped Diamond-Like Carbon Film to Hyperthermal Atomic Oxygen

M. Tagawa, K. Yokota, H. Saitoh, 2015 .

Effect of meso- and micropore structures on the hydrogen storage properties of nanoporous carbon materials

H. Saitoh, H. Akasaka, S. Ohshio, 2018, Journal of Porous Materials.

New Violet Phosphor Sr7Al12O25:Eu2+ Synthesized from Sr–Al–O:Eu Powder Mounted on Polycrystalline Alumina

H. Saitoh, H. Akasaka, S. Ohshio, 2010 .

Hydrogen adsorption and desorption characteristics of heat-treated calcium carbonate derived from Akoya-Pearl-Oyster nacre

H. Saitoh, Hengyi Li, O. Ito, 2020 .

The correlation between optical and mechanical properties of amorphous diamond-like carbon films prepared by pulsed filtered cathodic vacuum arc deposition

H. Saitoh, Xiaolong Zhou, Keiji Komatsu, 2018 .

Optical and structural stability of blue SrO:Eu2+ phosphor

H. Saitoh, S. Ohshio, Ikumi Toda, 2013 .

Synthesis and luminescence properties of Eu2+-doped 8-coordinated SrO phosphors

T. Shirai, H. Saitoh, S. Ohshio, 2013 .

Increase in H2 storage capacity of nanoporous carbon fabricated from waste rice husk via improving the mode of the reaction mixture cooling down

Jie. Zhu, H. Saitoh, Ikumi Toda, 2021 .

Thermal barrier coatings formed by flame-spray with metal–EDTA

H. Saitoh, A. Nakamura, Zhenyu Guo, 2020, Japanese Journal of Applied Physics.

Aggregation-induced Emission Properties of 2-(N,N-diphenylamino)tryptanthrin

H. Saitoh, S. Ohshio, Ikumi Toda, 2019 .

Influence of voltage on etching rate of hydrogenated amorphous carbon films with HNO3 studied using surface plasmon resonance

H. Saitoh, S. Arakawa, Xiaolong Zhou, 2016 .

Quantitative NEXAFS and solid-state NMR studies of sp 3 /( sp 2 + sp 3 ) ratio in the hydrogenated DLC films

H. Saitoh, Tsuneo Suzuki, S. Kawahara, 2017 .

Hydrogen adsorption with micro-structure deformation in nanoporous carbon under ultra-high pressure

H. Saitoh, Keiji Komatsu, Heng Li, 2022, International Journal of Hydrogen Energy.

Structural behaviours of nanoporous carbon fabricated from rice husk

H. Saitoh, S. Ohshio, Ikumi Toda, 2020 .

Encapsulation of hydrogen in nanoporous carbon after high-pressure loading

H. Saitoh, Keiji Komatsu, Yoshinori Tsuda, 2022, Journal of the Ceramic Society of Japan.

Effects of Combustion Gas Species on Y 2 O 3 Film Produced from EDTA·Y·H Complex by Flame-Spraying Technique

H. Saitoh, H. Akasaka, S. Ohshio, 2016 .

Preparation of Nanoporous Carbon from Rice Husk through Alkali Activation Treatment: a Detailed Mechanistic Investigation

H. Saitoh, Keiji Komatsu, Takuhiro Watanabe, 2022, Silicon.

Epitaxial Growth of Magnesia Films on Single Crystalline Magnesia Substrates by Atmospheric-Pressure Chemical Vapor Deposition

H. Saitoh, S. Ohshio, Ikumi Toda, 2016 .

Additively Manufactured Zirconia for Dental Applications

J. Vleugels, S. Minakuchi, B. Van Meerbeek, 2021, Materials.

True density of nanoporous carbon fabricated from rice husk

Jie. Zhu, H. Saitoh, S. Ohshio, 2020 .

Synthesis of a Violet Sr–Al–O:Eu2+ Phosphor Particle Using Elemental Al Diffusion

H. Saitoh, H. Akasaka, S. Ohshio, 2014 .

Low-Temperature Luminescence Spectroscopy of Violet Sr-Al-O:Eu2+ Phosphor Particles

H. Saitoh, H. Akasaka, S. Ohshio, 2015 .

Investigation of Temperature Dependence on Emission Properties of Sr-Al-O:Eu2+ Phosphor Synthesized Using Elemental Diffusion from Substrate

H. Saitoh, H. Akasaka, S. Ohshio, 2011, MSE 2011.

A Novel High-Energy Vacuum Ultraviolet Light Photofunctionalization Approach for Decomposing Organic Molecules around Titanium

T. Ogawa, Keiji Komatsu, T. Matsuura, 2023, International journal of molecular sciences.

Decomposing Organic Molecules on Titanium with Vacuum Ultraviolet Light for Effective and Rapid Photofunctionalization

T. Ogawa, Keiji Komatsu, T. Matsuura, 2022, Journal of functional biomaterials.

Flame-Sprayed Y2O3 Films with Metal-EDTA Complex Using Various Cooling Agents

T. Shirai, H. Saitoh, S. Ohshio, 2016, Journal of thermal spray technology (Print).

Effect of in-flight particle behavior on the morphology of flame sprayed Er2O3 splats

H. Saitoh, A. Nakamura, Keiji Komatsu, 2021 .

Effects of substrate temperature on morphology of erbia films deposited by flame spraying using metal–ethylenediaminetetraacetic acid complex

H. Saitoh, A. Nakamura, Y. Ikeda, 2019, Surface and Coatings Technology.

Synthesis of Y2 O3 films on an aluminum alloy substrate using flame-spray apparatus with a H2 -O2 flame

T. Shirai, H. Saitoh, A. Nakamura, 2018, International Journal of Applied Ceramic Technology.

Deposition of Metal Oxide Films from Metal–EDTA Complexes by Flame Spray Technique

H. Saitoh, H. Akasaka, S. Ohshio, 2014, Journal of Thermal Spray Technology.

Synthesis of Metal Oxide Particles Using Reaction Route from Rare-Earth Metal-EDTA Complexes

H. Saitoh, Takaakira Tsuchiya, H. Akasaka, 2014, Journal of Thermal Spray Technology.

Controlling the compactness and sp2 clusters to reduce interfacial damage of amorphous carbon/316L bipolar plates in PEMFCs

Aiying Wang, Kwang-Ryeol Lee, Peng Guo, 2022, International Journal of Hydrogen Energy.

Study of synchrotron radiation near-edge X-ray absorption fine-structure of amorphous hydrogenated carbon films at various thicknesses

H. Saitoh, Tsuneo Suzuki, H. Nakajima, 2015 .

Conditional Mitigation of Dental-Composite Material-Induced Cytotoxicity by Increasing the Cure Time

Ting-Ling Chang, T. Ogawa, Keiji Komatsu, 2023, Journal of functional biomaterials.

Structural analysis of amorphous carbon films by BEMA theory based on spectroscopic ellipsometry measurement

H. Saitoh, S. Arakawa, K. Kanda, 2017 .