Yousi Chen

发表

Gas sensitivity of a composite of multi-walled carbon nanotubes and polypyrrole prepared by vapor phase polymerization

Yang Li, Huicai Wang, Mujie Yang, 2007 .

Enhanced interfacial and mechanical properties of basalt fiber reinforced poly(aryl ether nitrile ketone) composites by amino-silane coupling agents

Chengde Liu, X. Jian, Hang Jia, 2021 .

Effect of ammonium-salt solutions on the surface properties of carbon fibers in electrochemical anodic oxidation

Q. Ouyang, Xue-Fei Wang, Yousi Chen, 2012 .

Preparation of low-cost carbon fiber precursors from blends of wheat straw lignin and commercial textile-grade polyacrylonitrile (PAN)

Dapeng Liu, Q. Ouyang, Wei Sun, 2018 .

Thermal behavior and thermal stabilization of guanidine hydrochloride-modified acrylic fiber for preparation of low-cost carbon fiber

Q. Ouyang, Yousi Chen, Jing Huang, 2018, Journal of Thermal Analysis and Calorimetry.

Thermal properties and thermal stabilization of lignosulfonate-acrylonitrile-itaconic acid terpolymer for preparation of carbon fiber

Dapeng Liu, Q. Ouyang, Liu He, 2018 .

Simultaneous DSC/TG analysis on the thermal behavior of PAN polymers prepared by aqueous free-radical polymerization

Q. Ouyang, Huang Jing, Yousi Chen, 2016 .

Fabrication of partially biobased carbon fibers from novel lignosulfonate–acrylonitrile copolymers

Dapeng Liu, Q. Ouyang, Yousi Chen, 2017, Journal of Materials Science.

A fast response resistive thin film humidity sensor based on poly(4‐vinylpyridine) and poly(glycidyl methacrylate)

Yang Li, Mujie Yang, Yang Li, 2007 .

The electrical responses to humidity of a composite of polyaniline and polyelectrolyte

Yang Li, Mu-jie Yang, Peixin Li, 2009 .

Composites of carbon black functionalized with polymers as candidates for the detection of methanol vapor

Yang Li, Mu-jie Yang, Hui-cai Wang, 2007 .

Quantitative structure–property relationships of polyacrylonitrile-based graphite fibers revealed by laser confocal Raman spectroscopy

Dapeng Liu, Q. Ouyang, Liu He, 2018 .

Supramolecular structure of highly oriented wet-spun polyacrylonitrile fibers used in the preparation of high-performance carbon fibers

Q. Ouyang, Yousi Chen, Jianxing Yang, 2015, Journal of Polymer Research.

A Simple Method for Preparation of Highly Conductive Nitrogen/Phosphorus-Doped Carbon Nanofiber Films

Tongzhou Chen, Yousi Chen, Yujie Song, 2022, Materials.

A humidity sensor based on interpenetrating polymer network prepared from poly(dimethylaminoethyl methacrylate) and poly(glycidyl methacrylate)

Yang Li, Mu-jie Yang, Tianxiang Xue, 2007 .

ZnO nanoflowers modified with RuO2 for enhancing acetone sensing performance

Fanli Meng, Minghui Yang, S. Du, 2019, Nanotechnology.

Establishment of Silane/GO Multistage Hybrid Interface Layer to Improve Interfacial and Mechanical Properties of Carbon Fiber Reinforced Poly (phthalazinone ether ketone) Thermoplastic Composites

Chengde Liu, Fangyuan Hu, Yousi Chen, 2021, Materials.

Ultra-robust carbon fibers for multi-media purification via solar-evaporation

Tiantian Li, Fu Liu, Yousi Chen, 2019, Journal of Materials Chemistry A.

Toughened of bismaleimide resin with improved thermal properties using amino-terminated Poly(phthalazinone ether nitrile sulfone)s

Chengde Liu, X. Jian, C. Liu, 2020 .

A multiscale hydrothermal carbon layer modified carbon fiber for composite fabrication

X. Shao, Qing Huang, Jie Wang, 2018, RSC advances.

A rate-dependent cohesive zone model with the effects of interfacial viscoelasticity and progressive damage

Shiqing Xin, Jian Xu, Shuxin Li, 2021 .

High Performance Humidity Fluctuation Sensor for Wearable Devices via a Bioinspired Atomic-Precise Tunable Graphene-Polymer Heterogeneous Sensing Junction

Yun Liang, Wenqin Wang, Wei Lu, 2018, Chemistry of Materials.

Achieving higher performances without an external curing agent in natural magnolol-based epoxy resin

Zhiyong Wei, Chengde Liu, X. Jian, 2021, Chinese Chemical Letters.

High-efficiency surfactant prepared from phenolic resin for multi-walled carbon nanotube aqueous suspension

Q. Ouyang, Yutong Li, Yousi Chen, 2018, Journal of Nanoparticle Research.

Preparation and Characterization of Lignosulfonate–Acrylonitrile Copolymer as a Novel Carbon Fiber Precursor

Q. Ouyang, Li Wang, Yousi Chen, 2016 .

Effect of Jet Swell and Jet Stretch on the Structure of Wet-Spun Polyacrylonitrile Fiber

Q. Ouyang, N. Zhang, Yousi Chen, 2011 .

Improved mechanical properties of basalt fiber/phthalonitrile composites modified by thermoplastic Poly(phthalazinone ether nitrile)s

Chengde Liu, X. Jian, Hang Jia, 2021 .

Thermal conductivity and mechanical properties enhancement of CF / PPBESK thermoplastic composites by introducing graphene

Chengde Liu, Fangyuan Hu, Yousi Chen, 2022, Polymer Composites.

Preparation of SiO2/GO/CF multi-scale reinforcements based on electrostatic interaction: a non-destructive and simple method to construct multi-level hybrid interface layers of carbon fiber reinforced thermoplastic resin composites

Nannan Li, Chengde Liu, Fangyuan Hu, 2022, Composites Part A: Applied Science and Manufacturing.

Surface structural evolvement in electrochemical oxidation and sizing and its effect on carbon fiber/epoxy composites properties

Q. Ouyang, Yousi Chen, X. Qian, 2012 .

Highly Efficient Actuator of Graphene/Polydopamine Uniform Composite Thin Film Driven by Moisture Gradients

Jiang He, Tao Chen, L. Qu, 2016 .

Poly(4-vinylpyridine)/carbon black composite as a humidity sensor

Yang Li, Huicai Wang, Mujie Yang, 2007 .

Biotissue‐Inspired Anisotropic Carbon Fiber Composite Hydrogels for Logic Gates, Integrated Soft Actuators, and Sensors with Ultra‐High Sensitivity

Jun Fu, Yang Cong, Yousi Chen, 2022, Advanced Functional Materials.

A multi-walled carbon nanotube/palladium nanocomposite prepared by a facile method for the detection of methane at room temperature

Yang Li, Huicai Wang, Mujie Yang, 2008 .

An Advanced Finite Element Modeling for the Failure of Notched Ceramic Matrix Composite With TFP Patch Reinforcement

Shiqing Xin, Jian Xu, Yunsheng Chen, 2021, Frontiers in Materials.

A New Strategy to Improve the Toughness of Epoxy Thermosets—By Introducing Poly(ether nitrile ketone)s Containing Phthalazinone Structures

Nannan Li, Chengde Liu, X. Jian, 2023, Materials.

Enhance the thermal conductivity and mechanical properties of CF/PPBESK thermoplastic composites by growth ZnO nanowires with tunable length and diameter on prepreg

Chengde Liu, Fangyuan Hu, Yousi Chen, 2022, Polymer.

Using mixture design approach for modeling and optimizing tribology properties of PPESK composites

Nannan Li, Chengde Liu, Yousi Chen, 2022, Composites. Part A, Applied science and manufacturing.

Effect of electrospun PPENK nanofiber loaded with ZnO nanowires on the mode Ⅱ fracture toughness, flexural properties and ILSS of CF/poly(phthalazinone ether ketone) composites

Chengde Liu, Hang Jia, Jiaxuan Zou, 2022, Composites Part B: Engineering.

High- and low-temperature resistant and intrinsically flame retardant poly(bisphthalazinone thioether sulfone ketone)s: Synthesis, structures and properties

Chengde Liu, X. Jian, Hang Jia, 2023, Chemical Engineering Journal.

Design of MWCNTs and rGO co‐decorated elastic core‐spun yarn towards multifunctional flexible strain sensor with low detection limit and wide working range

Nannan Li, Chengde Liu, Pei-feng Feng, 2023, Journal of Applied Polymer Science.

Interfacial properties of PPBES/CF composites reinforced by ammonified carbon fibers through thiol-ene click reaction

Jia Liu, Nannan Li, Fangyuan Hu, 2023, Polymer.