D. Trias

发表

Random models versus periodic models for fibre reinforced composites

Jorge E. Hurtado, J. A. Mayugo, D. Trias, 2006 .

Nominal strength of quasi-brittle open hole specimens

J. Renart, D. Trias, P. Maimí, 2012 .

Mitigating the weak impact response of thin-ply based thin laminates through an unsymmetrical laminate design incorporating intermediate grade plies

P. Linde, J. Costa, A. Sasikumar, 2019, Composite Structures.

Effect of ply thickness and ply level hybridization on the compression after impact strength of thin laminates

P. Linde, J. Costa, A. Sasikumar, 2019, Composites Part A: Applied Science and Manufacturing.

A 3D tomographic investigation to elucidate the low-velocity impact resistance, tolerance and damage sequence of thin non-crimp fabric laminates: effect of ply-thickness

José Costa, D. Trias, S. M. García-Rodríguez, 2018, Composites Part A: Applied Science and Manufacturing.

Intralaminar fracture toughness characterisation of woven composite laminates. Part II: Experimental characterisation

S. Pinho, P. Robinson, N. Blanco, 2014 .

Specimen geometry and specimen size dependence of the $${\mathcal {R}}$$R-curve and the size effect law from a cohesive model point of view

D. Trias, P. Maimí, E. González, 2017 .

Damage tolerance optimization of composite stringer run-out under tensile load

P. Badalló, D. Trias, E. Lindgaard, 2015 .

A comparative study of genetic algorithms for the multi-objective optimization of composite stringers under compression loads

J. A. Mayugo, P. Badalló, D. Trias, 2013 .

Hygrothermal effects on the translaminar fracture toughness of cross-ply carbon/epoxy laminates: Failure mechanisms

P. Camanho, D. Trias, P. Maimí, 2016 .

A progressive damage model for unidirectional fibre-reinforced composites based on fibre fragmentation. Part I: Formulation

A. Turón, J. Mayugo, D. Trias, 2005 .

Intralaminar fracture toughness characterisation of woven composite laminates. Part I: Design and analysis of a compact tension (CT) specimen

S. Pinho, P. Robinson, N. Blanco, 2014 .

Crack propagation in quasi-brittle two-dimensional isotropic lattices

A. Turón, D. Trias, P. Maimí, 2011 .

Optimization of composite stiffened panels under mechanical and hygrothermal loads using neural networks and genetic algorithms

Guillermo Rus, J. A. Mayugo, P. Badalló, 2012 .

A virtual testing based search for optimum compression after impact strength in thin laminates using ply-thickness hybridization and unsymmetrical designs

P. Linde, J. Costa, A. Turón, 2020 .

On how unsymmetrical laminate designs with tailored ply clusters affect compression after impact strength compared to symmetric baseline

A. Sasikumar, D. Trias, J. Costa, 2020 .

Unsymmetrical stacking sequences as a novel approach to tailor damage resistance under out-of-plane impact loading

E. V. González, Pere Maimí, D. Trias, 2019, Composites Science and Technology.

Impact and compression after impact response in thin laminates of spread-tow woven and non-crimp fabrics

P. Linde, J. Costa, A. Sasikumar, 2019, Composite Structures.

Maximization of the fundamental frequency of plates and cylinders

Pere Maimí, N. Blanco, D. Trias, 2016 .

Quality control of CFRP by means of digital image processing and statistical point pattern analysis

Rafael García, J. Hurtado, N. Blanco, 2007 .

Determination of the critical size of a statistical representative volume element (SRVE) for carbon reinforced polymers

J. Hurtado, A. Turón, D. Trias, 2006 .

Characterization of the translaminar fracture Cohesive Law

E. V. González, Pere Maimí, D. Trias, 2016 .

Micromechanical Analysis of Mode I Crack Growth in Carbon Fibre Reinforced Polymers

D. Trias, P. Maimí, 2012 .

Numerical and experimental analysis of stresses and failure in T-bolt joints

Alfredo Güemes, Víctor Martínez, Dani Trias, 2011 .

A two-scale method for matrix cracking probability in fibre-reinforced composites based on a statistical representative volume element

Jorge E. Hurtado, Bodo Fiedler, D. Trias, 2006 .

A progressive damage model for unidirectional fibre-reinforced composites based on fibre fragmentation. Part II: Stiffness reduction in environment sensitive fibres under fatigue

Albert Turon, J. A. Mayugo, N. Blanco, 2005 .

Specimen geometry and specimen size dependence of the R\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\mathcal {R}}$

D. Trias, P. Maimí, E. González, 2017, International Journal of Fracture.

Fracture mechanics and new techniques and criteria for the design of structural components for wind tu rbines

Iñaki Nuin, Daniel Trias, Raquel Rojo, 2007 .