A. Chugreev

发表

Advanced finite element analysis of die wear in sheet-bulk metal forming processes

B. Behrens, M. Vucetic, A. Bouguecha, 2016 .

Experimental and numerical characterization method for forming behavior of thermoplastics reinforced with woven fabrics

Bernd-Arno Behrens, Hendrik Wester, B. Behrens, 2019, Procedia Manufacturing.

Numerical analysis of residual stresses on microscale and mesoscale in hot bulk forming parts under specific cooling

J. Schröder, L. Scheunemann, D. Brands, 2019, PAMM.

Sensitivity Analysis of Oxide Scale Influence on General Carbon Steels during Hot Forging

R. Kawalla, G. Korpała, B. Awiszus, 2018 .

Advanced Wear Simulation for Bulk Metal Forming Processes

B. Behrens, M. Vucetic, A. Bouguecha, 2016 .

Fabrication of piston pins made of a novel aluminium-alloyed UHC steel

B. Behrens, A. Chugreev, Mohammad Kazhai, 2019, The International Journal of Advanced Manufacturing Technology.

Investigation of masking concepts for influencing the austenitization process during press hardening

K. Wölki, B. Behrens, S. Hübner, 2018 .

Manufacturing and Evaluation of Multi-Material Axial-Bearing Washers by Tailored Forming

Gerhard Poll, Bernd-Arno Behrens, Thomas Hassel, 2019, Metals.

Numerical investigations on the lateral angular co-extrusion of aluminium and steel

Bernd-Arno Behrens, Christian Klose, J. Uhe, 2018 .

A Numerical Study on Co-Extrusion to Produce Coaxial Aluminum-Steel Compounds with Longitudinal Weld Seams

C. Klose, B. Behrens, A. Chugreev, 2018, Metals.

Experimental and Numerical Investigations of the Development of Residual Stresses in Thermo-Mechanically Processed Cr-Alloyed Steel 1.3505

J. Schröder, L. Scheunemann, D. Brands, 2019, Metals.

Parametric Study of Hybrid Metal-Composites Clinching Joints

R. Rolfes, A. Dean, B. Behrens, 2018 .

Experimental and Numerical Investigations on the Combined Forming Behaviour of DX51 and Fibre Reinforced Thermoplastics Under Deep Drawing Conditions

B. Behrens, H. Wester, A. Chugreev, 2020 .

Thermodynamic and physical properties of Zr3Fe and ZrFe2 intermetallic compounds

I. Saenko, I. Abrikosov, M. .. Kriegel, 2019, Intermetallics.

Approach for modelling the Taylor-Quinney coefficient of high strength steels

B. Behrens, A. Chugreev, F. Bohne, 2019, Procedia Manufacturing.

On the analysis of microstructural residual stresses in hot bulk forming parts under specific cooling

J. Schröder, L. Scheunemann, D. Brands, 2018, PAMM.

Experimental-numerical approach to efficient TTT-generation for simulation of phase transformations in thermomechanical forming processes

B. Behrens, A. Chugreev, C. Kock, 2018, IOP Conference Series: Materials Science and Engineering.

Experimental investigations on the transformation-induced plasticity in a high tensile steel under varying thermo-mechanical loading

B. Behrens, A. Bouguecha, A. Chugreev, 2017 .

Investigation of the composite strength of hybrid steel-steel semi-finished products manufactured by laser beam welding and friction welding

S. Kaierle, J. Wallaschek, J. Twiefel, 2018, IOP Conference Series: Materials Science and Engineering.

Fabrication of piston pins made of a novel aluminium-alloyed UHC steel

B. Behrens, A. Chugreev, D. Yarcu, 2019, The International Journal of Advanced Manufacturing Technology.

Effect of Manganese on Nitriding and Softening Behaviour of Steel AISI H10 Under Cyclic Thermal Loads

F. Nürnberger, B. Behrens, A. Chugreev, 2018, Advances in Production Research.

Numerical and Experimental Investigation of Thermoplastics in Multi-Axis Forming Processes

K. Dröder, B. Behrens, A. Chugreev, 2019, Procedia CIRP.

Tribological Study on Tailored-Formed Axial Bearing Washers

S. Kaierle, L. Overmeyer, F. Pape, 2018, Tribology Online.

A sectionwise defined model for the material description of 100Cr6 in the thixotropic state

B. Behrens, A. Chugreev, M. Hootak, 2018 .

Application of the Sehitoglu’s model for the calculation of tool life in thixoforging of steel parts

B. Behrens, A. Chugreev, M. Hootak, 2019, PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2019.

Joining zone shape optimisation for hybrid components made of aluminium-steel by geometrically adapted joining surfaces in the friction welding process

Bernd-Arno Behrens, T. Matthias, B. Behrens, 2019, PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2019.

FE-simulation of hot forging with an integrated heat treatment with the objective of residual stress prediction

B. Behrens, A. Chugreev, Anna Chugreeva, 2018 .

Macroscopic fe-simulation of residual stresses in thermo-mechanically processed steels considering phase transformation effects

B. Behrens, A. Chugreev, C. Kock, 2019 .

DEVELOPMENT AND NUMERICAL VALIDATION OF COMBINED FORMING PROCESSES FOR PRODUCTION OF HYBRID PARTS

B. Behrens, S. Hübner, A. Chugreev, 2019, Technologies for economical and functional lightweight design.

Stress-state dependent fracture characterisation and modelling of an AZ31 magnesium sheet alloy at elevated temperatures

B. Behrens, A. Chugreev, M. Dykiert, 2019, Procedia Manufacturing.