C. Frantz

发表

Stable and unstable conditions of the sputtering mode by modulating at low frequency the current of a magnetron discharge

A. Billard, F. Perry, C. Frantz, 1997 .

Influence of the target temperature on a reactive sputtering process

A. Billard, F. Perry, D. Mercs, 1999 .

Sputtering of Al-Cr and Al-Ti composite targets in pure Ar and in reactive Ar-N2 plasmas

Thierry Czerwiec, A. Billard, F. Sanchette, 1997 .

An optical emission spectroscopy study of a reactive magnetron sputtering Ar-O2 discharge modulated at low frequency

A. Billard, F. Perry, C. Frantz, 1997 .

MARTENSITIC TRANSFORMATION

C. Frantz, M. Foos, M. Gantois, 2018 .

Influence of the intrinsic coating properties on the contact mechanical strength of perfectly adhering carbon-doped AISI 310 PVD films

J. V. Stebut, A. Billard, C. Frantz, 1990 .

Formation of Fe7C3 and Fe5C2 type metastable carbides during the crystallization of an amorphous Fe75C25 alloy

G. Caër, C. Frantz, N. Heiman, 1981 .

Mechanically reinforced and corrosion-resistant sputtered amorphous aluminium alloy coatings

A. Billard, F. Sanchette, C. Frantz, 1998 .

Influence of oxygen flow rate on the structural and mechanical properties of reactively magnetron sputter-deposited Zr–B–O coatings

J. Pierson, T. Belmonte, A. Billard, 1999 .

Structural analysis of thermal oxide layers grown on Zircaloy-4 established with the help of chemically homogeneous sputter-deposited Zr-O thin films

B. Stauder, H. Michel, C. Frantz, 1993 .

Anomalous thermal expansion of silver chlorate in the tetragonal and cubic phases

S. Suryanarayana, C. Frantz, V. Deshpande, 1982 .

Tetragonal to cubic phase transition in silver chlorate

S. Suryanarayana, C. Frantz, V. Deshpande, 1982 .

Boriding with a thermally unstable gas (diborane)

C. Frantz, M. Gantois, P. Casadesus, 1979 .

Properties of sputtered stainless steel-nitrogen coatings and structural analogy with low temperature plasma nitrided layers of austenitic steels

C. Leroy, H. Michel, C. Frantz, 1991 .

Reactive magnetron sputtering as a way to improve the knowledge of metastable f.c.c. nitrogen solid solutions formed during plasma assisted nitriding of Inconel 690

C. Dong, T. Czerwiec, C. Frantz, 2003 .

Reactive magnetron sputtering of Inconel 690 by Ar–N2 plasma

C. Dong, Xiaona Li, T. Czerwiec, 2008 .

Basic properties of sputtered 310 stainless steel-nitrogen coatings

C. Frantz, M. Foos, A. Bourjot, 1990 .

Operando analysis of a solid oxide fuel cell by environmental transmission electron microscopy

M. Bugnet, T. Epicier, Q. Jeangros, 2023, 2302.12514.

CRYSTALLIZATION OF SPUTTERED IRON-CARBON AMORPHOUS ALLOYS WITH CARBON CONTENTS IN THE RANGE 18–50 at. %

C. Frantz, E. Bauer-grosse, 1985 .

Square-wave low-frequency modulation of the discharge current for high rate deposition of stoichiometric ceramic films

A. Billard, F. Perry, D. Mercs, 2001 .

Attempted modelling of thickness and chemical heterogeneity in coatings prepared by d.c. reactive magnetron sputtering

A. Billard, C. Frantz, 1993 .

Enhanced deposition rate of high quality stoichiometric ceramic compounds reactively sputter deposited at low pressure by modulating the discharge current at low frequency

F. Lapostolle, A. Billard, F. Perry, 1999 .

Defects in Fe7C3 type carbide formed during the crystallization of amorphous high carbon alloys and their relation with the amorphous state

C. Frantz, J. Morniroli, E. Bauer-grosse, 1982 .

Structure-properties relationship of metastable Al-Cr and Al-Ti alloys deposited by r.f. magnetron sputtering : role of nitrogen

A. Billard, F. Sanchette, C. Frantz, 1995 .

Enhanced deposition rate of d.c. reactively sputtered TiO2 films by means of low-frequency modulation of the discharge current

F. Lapostolle, A. Billard, C. Frantz, 1997 .

Chemical and structural analysis of aluminium-oxygen coatings obtained by d.c. magnetron reactive sputtering: some features of the process

B. Stauder, F. Perry, C. Frantz, 1995 .

An investigation of the pulse characteristics on deposition rate of reactively sputtered titanium dioxide films synthesised with a low-frequency modulation of the discharge current

A. Billard, F. Perry, C. Frantz, 1997 .

Corrosion-resistant and hard 310 stainless steel-carbon coatings prepared by reactive d.c. magnetron sputtering

A. Billard, C. Frantz, M. Foos, 1990 .

Deposition of metastable aluminium-chromium alloys by r.f. magnetron sputtering from mixed-powder targets

F. Sanchette, C. Frantz, Tran-Huu-Loi, 1993 .

Recent Results on Reactive Magnetron Sputtering for High-Rate Deposition of Ceramic Compound Films

A. Billard, C. Frantz, 1998 .

On reversible shape memory effect related to microstructural memory and residual stresses in Fe3Pt

C. Frantz, S. Durupt, M. Foos, 1977 .

Tribological behaviour of N- or O-doped austenitic stainless-steel magnetron sputter-deposited coatings

J. V. Stebut, A. Darbeïda, A. Billard, 1999 .

Shape Memory Effect and Anelasticity Associated with the Martensitic Transformation in the Stoechiometric Fe3Pt Alloy

C. Frantz, M. Foos, M. Gantois, 1975 .