H. Inoue

发表

The enhancement of response speed by loading the noble metal into the sensing layer for FET-Type N O2 sensors

N. Yamazoe, K. Shimanoe, M. Yuasa, 2011 .

Direct measurement of oxygen concentration inside cultured cartilage for relating to spatial growth of rabbit chondrocytes.

M. Kino‐oka, M. Taya, K. Sugawara, 2010, Journal of bioscience and bioengineering.

Topo-embryology: DNA Evolution from Ring to String Brings the Multi-cellar System

K. Hashimoto, K. Naitoh, H. Inoue, 2010 .

Catastrophic chaos theory: predicting recovery of health or death

Hirofumi Inoue, Ken Naitoh, K. Naitoh, 2013, Artificial Life and Robotics.

Texture and Corrosion Behavior of Thin Nickel Sheet Formed by Pulse Plating and Cold Rolling

Yong Choi, H. Inoue, Y. Choi, 2012 .

Estimation of Planar Anisotropy of the r-Value in Ferritic Stainless Steel Sheets

H. Inoue, J. Hamada, K. Agata, 2009 .

Recrystallization Texture and Shear Band Formation in Bending

H. Kaneko, Masaki Tanaka, K. Higashida, 2017 .

Structure and properties of white Si–O–C(–H) ceramics derived from polycarbosilane by thermal oxidation curing and H2 decarbonization process

K. Mitsuhara, T. Ohta, H. Inoue, 2016 .

Effects of Grain Size and Temperature on Environmental Embrittlement of Ni3(Si, Ti) Alloy

Y. Kaneno, T. Takasugi, H. Inoue, 2001 .

Evolution of recrystallization texture for Cu-30% Zn alloy sheets with high Young’s modulus in the transverse direction

H. Inoue, Fumito Ituchi, Tetsuo Cho, 2021 .

Prediction of In-Plane Anisotropy of Bendability Based on Orientation Distribution Function for Polycrystalline Face-Centered Cubic Metal Sheets with Various Textures

H. Inoue, 2015 .

Effect of Texture on r-value of Ferritic Stainless Steel Sheets

H. Inoue, J. Hamada, N. Ono, 2011 .

Texture and Planar Anisotropy of r-Value in Duplex Stainless Steel Sheet

H. Inoue, J. Hamada, 2010 .

Texture of TiNi shape memory alloy sheets produced by roll-bonding and solid phase reaction from elementary metals

T. Takasugi, H. Inoue, M. Ishio, 2003 .

X-RAY STRESS DETERMINATION OF COLD-ROLLED STEEL SHEET USING ORIENTATION DISTRIBUTION FUNCTION

Y. Hirose, H. Inoue, T. Sasaki, 2001 .

Crystal Orientation Distribution and Elastic Anisotropy in Cu-Ni-Si Alloy Sheets

H. Kaneko, H. Inoue, Tatsuhiko Eguchi, 2016 .

Study on the effect of crystallographic texture on the corrosion behaviour of pilgered zirconium by neutron diffraction

H. Inoue, E. Shin, Y. Choi, 2006 .

Highly chemoselective allylation of carbonyl compounds with tetraallyltin in acidic aqueous media

A. Yanagisawa, Hisashi Yamamoto, H. Inoue, 1993 .

Rhodium catalyzed transformation of propargylamines to 2-silylmethyl-2-alkenals: Formal silylformylation of allenes

J. Sakakibara, I. Matsuda, H. Inoue, 1992 .

Dynamic recrystallization and superplastic deformation of Co3Ti

Y. Watanabe, T. Takasugi, H. Inoue, 2000 .

Rhodium-catalyzed transformation of propargyl alcohol derivatives to 2-silylmethyl-2-alkenals

K. Itoh, I. Matsuda, H. Inoue, 1999 .

Switching of Cation Selectivity toward Na+ and K+ by a New Type of pH-Responsive 16-Crown-5 in a Countercurrent Double Uphill Transport System

I. Ikeda, Wanbin Zhang, H. Inoue, 2000 .

Characteristics of TiN Films Sputtered under Optimized Conditions of Metallic Mode Deposition

Y. Sugano, S. Kishida, H. Tokutaka, 1997 .

Thermal stability and annealing behavior of photoluminescence from Eu doped YAG

S. Komuro, H. Inoue, H. Aizawa, 2014 .

Texture Control of Aluminum and Magnesium Alloys by the Symmetric/Asymmetric Combination Rolling Process

H. Inoue, 2011 .

Texture and Mechanical Properties of AZ31 Magnesium Alloy Sheets Processed by Symmetric/Asymmetric Combination Hot-Rolling

T. Takasugi, H. Inoue, J. Horiuchi, 2010 .

Microstructure and texture evolution in titanium subjected to friction roll surface processing and subsequent annealing

Chun’an Ma, Hideo Watanabe, H. Inoue, 2012 .

Anomalous tensile elongation increase of moisture-embrittled Co3Ti alloys in the low strain rate range

H. Inoue, Y. Kaneno, T. Takasugi, 2000 .

Factors Affecting Texture Memory Appearing through α→γ→α Transformation in IF Steels

L. Kestens, K. Kawasaki, H. Inoue, 2007 .

Texture Control for Improving Deep Drawability in Rolled and Annealed Aluminum Alloy Sheets

T. Takasugi, H. Inoue, 2007 .

Characteristics of point defects and their clustering processes in FeMnCr and FeMnSiCr alloys

T. Muroga, N. Yoshida, H. Inoue, 1992 .

Recrystallization Texture and r-Value of Rolled and T4-Treated Al-Mg-Si Alloy Sheets

P. van Houtte, G. Gottstein, T. Takasugi, 2005 .

Texture Randomization of AZ31 Magnesium Alloy Sheets for Improving the Cold Formability by a Combination of Rolling and High-Temperature Annealing

K. Higashi, M. Kohzu, H. Inoue, 2010 .

High-temperature phase in zirconia film fabricated by aerosol gas deposition and its change upon subsequent heat treatment

Y. Sakka, E. Kita, E. Fuchita, 2013 .

Texture and shape memory strain in TiNi alloy sheets

Hirofumi Inoue, H. Inoue, N. Miwa, 1996 .

Catastrophic chaos theory: predicting recovery of health or death

K. Naitoh, H. Inoue, 2013, Artificial Life and Robotics.

Photooxygenative partial ring cleavage of bis(fulleroid): synthesis of a novel fullerene derivative with a 12-membered ring

S. Nagase, S. Murata, Toshiyasu Suzuki, 2001 .

Texture and Planar Anisotropy in Lean Duplex Stainless Steel Sheet

H. Inoue, J. Hamada, E. Ishimaru, 2016 .

A Nondestructive Evaluation Method: Measuring the Fixed Strength of Spot-Welded Joint Points by Surface Electrical Resistivity.

Keitaro Yamashita, Akira Shimamoto, Masahiro Iwata, 2013, Journal of pressure vessel technology.

Texture and Mechanical Properties of IF Steel/Polyethylene/IF Steel Laminates

H. Inoue, Tomoaki Hoshino, 2018, Materials Science Forum.

Determination of Orientation Distribution Functions from Incomplete Pole Figures by Iterative Series Expansion Method

H. Inoue, N. Inakazu, 1994 .

Effect of high‐pressure carbon dioxide on thermal conversion process of polydimethylsilane to Si–C backbone polymers

H. Inoue, M. Narisawa, Kouya Yamada, 2019, Journal of the American Ceramic Society.

Effect of Alumina Addition on T-M Transformation in Zirconia-Yttria System

H. Tsubakino, H. Inoue, Takaaki Tanaka, 2004 .

Texture, Tensile Properties and Press Formability of Mg-3Al-1Zn/Ti Clad Sheets Produced by Roll-Bonding

T. Takasugi, H. Inoue, M. Ishio, 2005 .

Mechanical Properties and Formability of Titanium-Clad Magnesium Alloy Sheets

H. Inoue, 2013 .

Microstructure Refinement and Texture Evolution of Titanium by Friction Roll Surface Processing

Hideo Watanabe, H. Inoue, Y. Takayama, 2009 .

Effect of Nitrogen on Planar Anisotropy of the r-value and Texture in Lean Duplex Stainless Steel Sheets

H. Inoue, J. Hamada, 2019, ISIJ International.

Anomalous Strain Rate Dependence of Tensile Elongation in Moisture-Embrittled L1 2 Alloys

Y. Kaneno, T. Takasugi, H. Inoue, 2000 .

Growth animation of human organs

Hirofumi Inoue, Roman Durikovic, Silvester Czanner, 2001, Comput. Animat. Virtual Worlds.

Transformation Textures in Ti–15V–3Cr–3Sn–3Al Alloy Sheets

H. Inoue, S. Fukushima, N. Inakazu, 1992 .

Texture Randomization of AZ 31 Magnesium Alloy Sheets for Improving the Cold Formability by a Combination of Rolling and High-Temperature Annealing

K. Higashi, M. Kohzu, H. Inoue, 2010 .

Prediction of Transformation Texture in Pure Titanium Sheet by Orientation Distribution Function

H. Inoue, N. Inakazu, 1988 .

Effects of SiO2 and Rare-Earth Oxide Additions on Densification and Mechanical Properties of Silicon Carbide Ceramics

T. Yano, H. Inoue, K. Katayama, 2003 .

A Generalization of the Taylor-Bishop-Hill Theories and the Rate-dependent Slip Model in Crystal Plasticity

K. Sekine, H. Inoue, 1999 .

Texture and Formability in Aluminum Alloy Sheets

T. Takasugi, H. Inoue, 2003 .