S. Oh

发表

Texture development of a multi-filamentary Bi/sub 2/Sr/sub 2/Ca/sub 2/Cu/sub 3/O/sub x/ HTS tape during thermo-mechanical treatment

K. Ryu, D. Ha, S. Oh, 2003 .

Anisotropy of critical current and glass-liquid transition flux density in Bi-2223/Ag tape

T. Hoshino, I. Muta, Taketsune Nakamura, 2000 .

The development of a novel cooking method (alternate roasting with its own fat) for chicken to improve nutritional value.

Jae Hyun Kim, J. Kim, Y. Kim, 2008, Journal of food science.

Processing and characterization of LaMnO3-buffered layer on IBAD-MgO template

S. Yoo, S. Moon, R. Ko, 2008 .

Current redistribution of a current carrying superconducting tape in a perpendicular magnetic field

S. Oh, D. Youm, J. Yoo, 2009 .

AC loss characteristics of Bi-2223 HTS tapes under bending

H. J. Kim, K. Seong, J. Bae, 2006 .

Development of long-length SmBCO coated conductors using a batch-type reactive co-evaporation method

S. Yoo, D. Ha, H. Kim, 2008 .

Effect of processing parameters on the microstructure of in situ reacted MgB2 superconductors

Jung-Ho Ahn, S. Oh, 2010 .

Effect of Bending Test Procedure on the Degradation Behavior of Critical Current in ReBCO Coated Conductor Tapes

H. Shin, M. Dedicatoria, S. Oh, 2009 .

Critical current density of SmBCO coated conductor on IBAD-MgO substrate fabricated by co-evaporation

Chan Park, S. Yoo, D. Ha, 2007 .

The deposition of Sm1Ba2Cu3O7−δ on SrTiO3 using co-evaporation method

Chan Park, D. Ha, T. H. Kim, 2007 .

Local and overall critical current of Bi2223-composite tape under applied tensile and bending strains

H. Okuda, M. Fujimoto, J. Shin, 2007 .

A Monte Carlo–shear lag simulation of tensile fracture behaviour of Bi2223 filament

H. Okuda, D. Ha, M. Tanaka, 2005 .

Damage evolution under bending and tensile stress and its influence on critical current of Bi2223/Ag superconducting composite tape

Mototsugu Tanaka, M. Hojo, H. Okuda, 2004 .

Tensile damage and its influence on the critical current of Bi2223/Ag superconducting composite tape

Mototsugu Tanaka, M. Hojo, H. Okuda, 2003 .

Bending strain characteristics of critical current in REBCO CC tapes in different modes

J. Dizon, M. Dedicatoria, S. Oh, 2009 .

Electro-mechanical Property Evaluation of REBCO Coated Conductor Tape with Stainless Steel Substrate

H. Shin, S. Moon, M. Dedicatoria, 2010 .

Characterization of Co-Evaporated ${\rm SmBa}_{2}{\rm Cu}_{3}{\rm O}_{7}$ Coated Conductors by Polarized-Raman Scattering Spectroscopy

W. Jo, H. Cheong, S. Oh, 2011, IEEE Transactions on Applied Superconductivity.

The behavior of the magnetic irreversibility of SmBCO coated conductor on IBAD-MgO template fabricated by EDDC

S. Yoo, S. Moon, S. Kang, 2011 .

Preliminary investigation of Ic homogeneity along the longitudinal direction of YBCO coated conductor tape under tensile loading

H. Shin, J. Dizon, K. Sim, 2013 .

Bending strain effects on the critical current in Cu-stabilized IBAD/EDDC processed SmBCO coated conductor tape

T. H. Kim, J. Dizon, H. Kim, 2008 .

Reversible tensile strain dependence of the critical current in YBCO coated conductor tapes

D. Ha, T. H. Kim, J. Dizon, 2007 .

Study on thermo-mechanical treatment in fabrication of Bi2212 /Ag HTS wire

S. C. Kim, C. Bruzek, D. Ha, 2007 .

Glycine-assisted combustion synthesis and magnetocaloric properties of polycrystalline La0.8Ca0.2MnO3

S. Baik, B. Sinha, K. Chung, 2012 .

The Magnetic Properties of SmBCO Coated Conductors Fabricated by Evaporation Using Drum in Dual Chamber (EDDC) Processing

S. Yoo, S. Moon, H. Kim, 2011, IEEE Transactions on Applied Superconductivity.

The effect of solvent treatments and aging on the superconducting properties of MgB2 materials

S. Yoo, D. Ha, T. H. Kim, 2007 .

Superconducting properties of polycrystalline MgB2 superconductors fabricated by spark plasma sintering

S. Yoo, S. Moon, R. Ko, 2005 .

The effect of geometry of composite MgB2/stainless-steel (SS) wires fabricated by PIT process on the superconducting properties

D. Ha, R. Ko, S. Kim, 2004 .

Effect of SiC-Impurity Layer and Growth Temperature on MgB2 Superconducting Tapes Fabricated by HPCVD

W. Seong, J. Joo, S. Oh, 2011, 1112.1908.

Ultra-large current transport in thick SmBa2Cu3O7−x films grown by reactive co-evaporation

Y. Jo, W. Jo, D. Ha, 2015 .

Superior properties of SmBCO coated conductors at high magnetic fields and elevated temperatures

R. Fuger, M. Eisterer, H. Weber, 2010 .

Critical currents of Sm/sub 1/Ba/sub 2/Cu/sub 3/O/sub 7-/spl delta// films grown on various substrates

K. Chung, Sung‐Min Choi, S. Oh, 2003 .

Estimation of Young's modulus, residual strain and intrinsic fracture strain of Bi2212 filaments in Bi2212/Ag/Ag alloy composite wire

S. C. Kim, H. Okuda, D. Ha, 2008 .

Analysis of the residual strain change of Bi2212, Ag alloy and Ag during the heating and cooling process in Bi2212/Ag/Ag alloy composite wire

S. C. Kim, H. Okuda, D. Ha, 2008 .

Structural and electrical properties of SrRuO3 thin films for buffer layers of coated conductors

W. Jo, S. Yoo, K. Kim, 2007 .

Pore structures and grain connectivity of bulk MgB2

Jung-Ho Ahn, S. Oh, 2009 .

Current Limiting Phenomena in $\hbox{SmBa}_{2}\hbox{Cu}_{3}\hbox{O}_{7}$ Coated Conductors Observed by Laser-Induced Thermoelectric Imaging and Low-Temperature Laser Scanning Microscopy

W. Jo, M. Inoue, T. Kiss, 2011, IEEE Transactions on Applied Superconductivity.

Effects of B2H6 flow rate and deposition time on superconducting properties of MgB2/Hastelloy tapes

K. Chung, W. Seong, K. Cho, 2011 .

The epitaxial growth of BaSnO3 buffer layer on IBAD-MgO template and its effects on GdBa2Cu3O7−δ film: A preliminary study

S. Yoo, S. Moon, R. Ko, 2010 .

Progress in research and development for REBCO coated conductors by reactive co-evaporation

S. Oh, H. Kima, S. Moonb, 2014 .

Deposition of LaMnO3 buffer layer on IBAD-MgO template by reactive DC sputtering

S. Yoo, D. Ha, T. H. Kim, 2009 .

Temperature-dependent critical current density of Bi(Pb)-Sr-Ca-Cu-O tapes in fields up to 20 tesla

D. Larbalestier, K. Osamura, D. Hampshire, 1990 .

Analysis of the correlation between n-value and critical current in bent multifilamentary Bi2223 composite tape based on a damage evolution model

M. Hojo, H. Okuda, D. Ha, 2012 .

Fabrication of highly textured IBAD-MgO template by continuous reel-to-reel process and its characterization

S. Yoo, S. Moon, R. Ko, 2007 .

Sample-length dependence of the critical current of slightly and significantly bent-damaged Bi2223 superconducting composite tape

H. Okuda, D. Ha, S. Oh, 2007 .

Distribution of local critical current along sample length and its relation to overall current in a long Bi2223/Ag superconducting composite tape

H. Okuda, D. Ha, S. Oh, 2006 .

Robust critical current density in applied magnetic fields in 5 μm thick, SmBa 2 Cu 3 O 7- δ based superconducting wires

F. List, A. Goyal, Hosup Kim, 2015 .

Optimal Design of −40-kV Long-Pulse Power Supply

H. Heo, S. C. Kim, S. S. Park, 2016, IEEE Transactions on Plasma Science.

Design and construction of the KSTAR tokamak

Yong-Seok Hwang, S. R. In, I. S. Ko, 2001 .

The comparative study of magnetic properties for YBCO coated conductors based on RABiTS and IBAD templates

K. Sim, Seokho Kim, S. Yoo, 2010 .

Simulation for prediction of distribution of critical current among specimens under low applied bending strains near the average irreversible strain in Bi2223 composite tape

H. Okuda, D. Ha, M. Fujimoto, 2010 .

Simulation on the relation of distribution of overall critical transport current to that of local one in bent-damaged Bi2223 superconducting composite tape

H. Okuda, D. Ha, M. Fujimoto, 2009 .

Residual and fracture strains of Bi2223 filaments and their relation to critical current under applied bending and tensile strains in Bi2223∕Ag∕Ag alloy composite superconductor

H. Okuda, D. Ha, M. Sato, 2008 .

Influence of transverse compressive stress on Ic degradation of Ag alloy sheathed Bi-2223 tapes

K. Ryu, D. Ha, S. Oh, 2004 .

Correlation between local and overall critical current of bent multifilamentary Bi2223/Ag tape

H. Okuda, H. Nakajima, M. Fujimoto, 2007 .

Distribution of normalized critical current of bent multifilamentary Bi2223 composite tape

H. Okuda, D. Ha, M. Fujimoto, 2009 .

Simulation on the relation of distribution of overall critical transport current to that of local one in bent-damaged Bi2223 superconducting composite tape

H. Okuda, D. Ha, M. Fujimoto, 2009 .

Microstructure change during crystallization of amorphous Bi(Pb)-Sr-Ca-Cu-O ceramics

K. Osamura, S. Oh, 1991 .

Effect of the composition on the superconducting properties of IBAD-MgO SmBCO coated conductors with superconducting film directly deposited on epi-MgO layer

K. Chung, S. Moon, Hosup Kim, 2011 .

Development of Bi-2223 HTS Tape and Its Application to Coil and Current Leads

K. Ryu, D. Ha, S. Oh, 2001 .

Fabrications and properties of MgB/sub 2//stainless-steel tapes by PIT process

M. Sohn, D. Ha, R. Ko, 2003 .

Single-filament composite MgB2/stainless-steel ribbons by powder-in-tube process

K. Ryu, M. Sohn, D. Ha, 2001, cond-mat/0106124.

Electro-Mechanical Property Investigation of Striated REBCO Coated Conductor Tapes in Pure Torsion Mode

M. Dedicatoria, Hosup Kim, S. Oh, 2011, IEEE Transactions on Applied Superconductivity.