C. Bois

发表

Monitoring a delamination in a laminated composite beam using in-situ measurements and parametric identification

Christian Hochard, Philippe Herzog, Christophe Bois, 2007 .

A method to determine composite material residual tensile strength in the fibre direction as a function of the matrix damage state after fatigue loading

T. Palin‐Luc, J. Valette, C. Bois, 2017 .

A multiscale damage and crack opening model for the prediction of flow path in laminated composite

C. Bois, Jean-Christophe Wahl, Jean-Charles Malenfant, 2014 .

A new device for measurement of permeability evolution under pressure loading: application to CFRP pipes

J. Arbaoui, C. Bois, Jean-Christophe Wahl, 2020 .

A new device to measure permeability evolution under pressure loading: Application to CFRP pipes

J. Arbaoui, C. Bois, Jean-Christophe Wahl, 2017 .

An analytical model for the strength prediction of hybrid (bolted/bonded) composite joints

H. Wargnier, Christophe Bois, Jean-Christophe Wahl, 2013 .

Effect of temperature on damage mechanisms and mechanical behaviour of an acrylic-thermoplastic-matrix and glass-fibre-reinforced composite

C. Bois, Jean-Christophe Wahl, T. Palin-Luc, 2020, Journal of Composite Materials.

Relationship between damage and permeability in liner-less composite tanks : experimental study at the lamina level

C. Bois, Jean-Christophe Wahl, N. Perry, 2016 .

Development of a micromechanical model in interaction with parameters related to the microstructure of carbon/epoxy composites.

C. Bois, Jean-Christophe Wahl, N. Perry, 2014 .

A reduced fastener model using Multi-Connected Rigid Surfaces for the prediction of both local stress field and load distribution between fasteners

H. Wargnier, Ramzi Askri, Christophe Bois, 2016 .

Monitoring of Laminated Composites Delamination Based on Electro-Mechanical Impedance Measurement

Christian Hochard, Christophe Bois, C. Hochard, 2004 .

Tolerance synthesis of fastened metal-composite joints based on probabilistic and worst-case approaches

Nicolas Gayton, Christophe Bois, Ramzi Askri, 2018, Comput. Aided Des..

An analytical model for the prediction of load distribution in multi-bolt composite joints including hole-location errors

H. Wargnier, Christophe Bois, Julie Lecomte, 2014 .

Measurements and modelling for the monitoring of damage laminated composites structures

C. Hochard, C. Bois, 2003 .

Ply scale modelling of the quasi-static and fatigue behaviours of an acrylic-thermoplastic-matrix and glass-fibre-reinforced laminated composite covering the service temperature range of wind turbine blades

C. Bois, Damien Caous, Jean-Christophe Wahl, 2021 .

A progressive intra- and inter-laminar damage model to predict the effect of out-of-plane confinement on pin-bearing behaviour of laminated composites

Hervé Wargnier, Christophe Bois, C. Bois, 2017 .

Impact of material degradations on load transfer and assembly behavior. Application to reinforced holes in composite assembly

C. Bois, Jean-Christophe Wahl, H. Wargnier, 2012 .

Analysis of the fatigue behaviour of laminated composite holes subjected to pin-bearing loads

M. Chérif, C. Bois, Paul Van Der Sypt, 2017 .

Thick composite design for hydrogen vessels: A contribution to composite design method

Nicolas Perry, Christophe Bois, Alain Bernard, 2013 .

MULTI-CRITERIA APPROACH FOR THE DESIGN OF COMPOSITE STRUCTURES MADE BY ADDITIVE MANUFACTURING

J. E. Yagoubi, C. Bois, R. Kromer, 2021 .

Toward composite wind turbine blade fatigue life assessment using ply scale damage model

Thierry Palin-Luc, Julien Valette, Damien Caous, 2018 .

Science Arts & Métiers (SAM)

J. Arbaoui, C. Bois, Jean-Christophe Wahl, 2022 .

DESIGN OF HYBRID (BONDED/FASTENER) COMPOSITE JOINTS: FROM LOAD TRANSFER TOWARD STRENGTH PREDICTION

C. Bois, H. Wargnier, E. L. Goff, 2012 .