M. Pujar

发表

Effect of boron addition on pitting corrosion resistance of modified 9Cr–1Mo steel: Application of electrochemical noise

A. K. Bhaduri, U. K. Mudali, S. Thirunavukkarasu, 2011 .

Influence of solution-annealing and stress-relieving on the pitting corrosion resistance of modified 316N SS weld metals: A study using EN technique

N. Parvathavarthini, R. Dayal, M. Pujar, 2010 .

Effect of Nitrogen on Stress Corrosion Behavior of Austenitic Stainless Steels Using Electrochemical Noise Technique

R. Dayal, C. Mallika, M. Pujar, 2015, Journal of Materials Engineering and Performance.

Electrochemical noise studies of the effect of nitrogen on pitting corrosion resistance of high nitrogen austenitic stainless steels

S. Singh, U. K. Mudali, M. Pujar, 2011 .

Comparison of SCC Behavior of 304L Stainless Steels With and Without Boron Addition in Acidic Chloride Environment

C. Mallika, M. Pujar, U. Kamachi Mudali, 2016, Journal of Materials Engineering and Performance.

Effect of Addition of Boron and Nitrogen on the Corrosion Resistance of Modified 9Cr-1Mo Ferritic Steel

K. Laha, U. K. Mudali, C. Mallika, 2014 .

Pitting Corrosion Behaviour of Boron Added Modified 9Cr–1Mo Steel: Combined Effects of Alkali and Chloride Ions

N. G. Krishna, C. Mallika, N. Upadhyay, 2015, Transactions of the Indian Institute of Metals.

Microbiologically Influenced Corrosion in UNS S31653: Detection and Analysis Using Electrochemical Noise Technique

R. P. George, U. K. Mudali, M. Pujar, 2011 .

Enhancement of Corrosion Resistance of Type 304 Stainless Steel Through a Novel Thermo-mechanical Surface Treatment

L. M. Kukreja, R. Kaul, M. Pujar, 2013, Journal of Materials Engineering and Performance.

Improved pitting corrosion resistance of cold worked and thermally aged AISI type 316 L(N) SS by laser surface modification

H. S. Khatak, A. Nath, P. Ganesh, 2007 .

Corrosion and Passive Film Formation Studies on Modified 9Cr–1Mo Steel in Different Sodium Hydroxide Concentrations at Room Temperature and in Boiling Condition

U. K. Mudali, C. Mallika, M. Pujar, 2017, Transactions of the Indian Institute of Metals.

Effect of laser surface melting on the corrosion resistance of chromium-plated 9Cr-1Mo ferritic steel in an acidic medium

R. Dayal, E. Kreutz, A. Khanna, 1993, Journal of Materials Science.

Corrosion Fatigue Behavior of 316LN SS in Acidified Sodium Chloride Solution at Applied Potential

U. K. Mudali, C. Mallika, M. Pujar, 2015 .

Use of Electrochemical Noise (EN) Technique to Study the Effect of sulfate and Chloride Ions on Passivation and Pitting Corrosion Behavior of 316 Stainless Steel

H. S. Khatak, R. Dayal, H. Shaikh, 2007 .

Corrosion Behavior of 316LN and 316 Stainless Steels During Long-term Exposure to Aerated 0.5 M NaCl Using Electrochemical Noise Technique

H. S. Khatak, S. Jena, N. Parvathavarthini, 2008, Journal of materials engineering and performance (Print).

Characterisation of microstructural damage due to corrosion fatigue in AISI type 316 LN stainless steels with different nitrogen contents

C. Mallika, M. Pujar, A. Poonguzhali, 2016 .

Some aspects of corrosion and film formation of austenitic stainless steel type 316LN using electrochemical impedance spectroscopy (EIS)

N. Parvathavarthini, R. Dayal, M. Pujar, 2007 .

Pitting and stress corrosion cracking studies on AISI type 316N stainless steel weldments

J. Philip, M. Pujar, A. Toppo, 2018, Defence Technology.

Effect of composition on the transformation of δ-ferrite TO σ in type 316 stainless steel weld metals

V. Shankar, T. Gill, M. Pujar, 1995 .

Pitting Corrosion Studies on Solution-Annealed Borated Type 304L Stainless Steel Using Electrochemical Noise Technique

U. Kamachi Mudali, Namrata Upadhyay, C. Mallika, 2014 .

Effects of laser surface melting on the pitting resistance of sensitized nitrogen-bearing type 316L stainless steel

U. Kamachi Mudali, R. K. Dayal, R. Dayal, 1998 .

Effect of high temperature aging on ferrite transformation kinetics and tensile properties of type 316L stainless steel weld metal

H. S. Khatak, H. Shaikh, P. Sivaprasad, 1994 .

Effect of Nitrogen and Sensitization on the Microstructure and Pitting Corrosion Behavior of AISI Type 316LN Stainless Steels

M. Pujar, A. Poonguzhali, U. Kamachi Mudali, 2013, Journal of Materials Engineering and Performance.

Correlation of Electrochemical Noise Parameters with Degree of Sensitization in AISI Type 316LN Stainless Steel

C. Mallika, N. Upadhyay, M. Pujar, 2017, Transactions of the Indian Institute of Metals.

Pitting Corrosion of Austenitic Stainless Steels and Their Weldments

U. K. Mudali, M. Pujar, 2002 .

Assessment of intergranular corrosion (IGC) in 316(N) stainless steel using electrochemical noise (EN) technique

N. Parvathavarthini, R. Dayal, S. Thirunavukkarasu, 2009 .

Dissolution behaviour of stainless steel weld metals during active potential range: A calculational approach

R. Dayal, T. Gill, S. Malhotra, 2000 .

Evaluation of the Effect of Molybdenum on the Pitting Corrosion Behavior of Austenitic Stainless Steels Using Electrochemical Noise Technique

N. G. Krishna, S. Singh, U. K. Mudali, 2017 .

Evaluation of microstructural and microchemical aspects of high density concrete exposed to sustained elevated temperature

C. S. Pillai, R. Preetha, U. K. Mudali, 2016 .

Assessment of stress corrosion crack initiation and propagation in AISI type 316 stainless steel by electrochemical noise technique

H. S. Khatak, R. Dayal, H. Shaikh, 2006 .

Susceptibility of As-Welded and Thermally Aged Type 316LN Weldments Toward Pitting and Intergranular Corrosion

R. Dayal, U. K. Mudali, T. Gill, 1992 .

Changes in Microstructural and Mechanical Properties of AISI Type 316LN Stainless Steel and Modified 9Cr-1Mo Steel on Long-Term Exposure to Flowing Sodium in a Bi-Metallic Sodium Loop

K. Thyagarajan, C. Mallika, A. Moitra, 2015, Metallurgical and Materials Transactions A.

Evaluation of microstructure and electrochemical corrosion behavior of austenitic 316 stainless steel weld metals with varying chemical compositions

R. Dayal, T. Gill, S. Malhotra, 2005 .

Assessment of Galvanic Corrosion in Galvanic Couples of Sensitized and Nonsensitized AISI Type 304 Stainless Steel in Nitric Acid

H. S. Khatak, N. Parvathavarthini, R. Dayal, 2008 .

Microstructure, corrosion and mechanical properties characterization of AISI type 316L(N) stainless steel and modified 9Cr-1Mo steel after 40,000 h of dynamic sodium exposure at 525 °C

K. Thyagarajan, J. Philip, S. Kannan, 2019, Journal of Nuclear Materials.

Studies on Dissolution Behavior of the Surface Layer of Sodium-Exposed SS 316LN in Decontaminating Formulation Using PEMHS

C. Ramesh, N. Murugesan, U. K. Mudali, 2017 .

Evaluation of Potassium Permanganate (KMnO4) as a Green Corrosion Inhibitor/Sealant for Anodized Al 2024 and Al 6061 at Different pH Values

M. Crouse, A. Miller, M. Pujar, 2002 .

Corrosion behaviour of 304LN activated tungsten inert gas and flux-cored arc weld metals

M. Vasudevan, C. Mallika, M. Pujar, 2016 .

Microstructural and aqueous corrosion aspects of laser-surface-melted type 304 SS plasma-coated mild steel

R. Dayal, R. Raman, M. Pujar, 1994 .

Role of Delta-Ferrite in the Dissolution of Passive Films on the Austenitic Stainless-Steel Weld Metals

R. Dayal, T. Gill, S. Malhotra, 1999 .