W. Dempster

发表

Prediction of impact erosion in valve geometries

Thomas Scanlon, William Dempster, J. Peters, 2004 .

A CFD study on the mechanisms which cause cavitation in positive displacement reciprocating pumps

Matthew Stickland, William Dempster, Aldo Iannetti, 2015 .

UTILITY OF THE CREATtNlNE PRIOR TO I IN THE EMERQENCY co ES

W. Dempster, J. Olsen, B. Salomon, 1996 .

Analysing The Cross-Section of The Abdominal Aortic Aneurysm Neck and Its Effects on Stent Deployment

D. Nash, W. Dempster, Faidon Kyriakou, 2020, Scientific Reports.

The immersed boundary method for confined flows: Numerical diffusion and simulation accuracy of a boundary retraction scheme

Ya Zhang, Yonghao Zhang, W. Dempster, 2022, Computers & Fluids.

The Determination and Evaluation of Nitinol Constitutive Models for Finite Element Analysis

D. Nash, W. Dempster, D. G. Stevenson, 2007 .

Application of multiscale approaches to the investigation of sealing surface deformation for the improvement of leak tightness in pressure relief valves

William Dempster, Ali A. Anwar, Yevgen Gorash, 2016 .

Effect of high temperature on structural behaviour of metal-to-metal seal in a pressure relief valve

Robert Hamilton, David Nash, William Dempster, 2016 .

A CFD analysis of the dynamics of a direct-operated safety relief valve mounted on a pressure vessel

Maosen Cao, Young-Chul Park, Lei Cui, 2014 .

Computational Fluid Dynamics Analysis of the Flow Force Exerted on the Disk of a Direct-Operated Pressure Safety Valve in Energy System

Xueguan Song, F. Zheng, Chaoyong Zong, 2020 .

Two phase discharge flow prediction in safety valves

William Dempster, Wael Elmayyah, W. Dempster, 2013 .

Prediction of the Flow and Force Characteristics of Safety Relief Valves

C. K. Lee, J. Deans, C. K. Lee, 2006 .

Yang, Liu and Wang, Zhoujie and Dempster, William and Yu, Xinhai and Tu, Shan-Tung (2017) Experiments and transient simulation on spring- loaded pressure relief valve under high temperature and high pressure

Liu Yang, Xinhai Yu, S. Tu, 2018 .

Experiments and transient simulation on spring-loaded pressure relief valve under high temperature and high pressure steam conditions

Liu Yang, Shan-Tung Tu, William Dempster, 2017 .

An investigation of the two phase flow and force characteristics of a safety valve

William Dempster, Moftah Alshaikh, W. Dempster, 2015 .

Dynamic Instability Analysis of a Spring-Loaded Pressure Safety Valve Connected to a Pipe by Using Computational Fluid Dynamics Methods

Xueguan Song, Fuzheng Qu, F. Zheng, 2021 .

Experimental characteristics of steam bubble growth at orifices in sub-cooled liquid

W. Dempster, B. Arebi, 2001 .

Bubble formation at two adjacent submerged orifices in inviscid fluids

William Dempster, Bashir H. Arebi, W. Dempster, 2013 .

Evaluation of a New Approach for Modeling Full Ring Stent Bundles with the Inclusion of Manufacturing Strains

David Nash, William Dempster, Faidon Kyriakou, 2019, Annals of Biomedical Engineering.

CFD study of Jet Impingement Test erosion using Ansys Fluent® and OpenFOAM®

Alejandro López, William Nicholls, Matthew T. Stickland, 2015, Comput. Phys. Commun..

High-Fidelity Computational Fluid Dynamics Modeling and Analysis of a Pressure Vessel-Pipe-Safety Valve System in Gas Service

Xueguan Song, William Dempster, Dianjing Chen, 2021 .

Comparison of the computed flow field around a bubble growing at an orifice using PIV techniques

M. Stickland, W. Dempster, 1999 .

A Methodology to Quantify the Geometrical Complexity of the Abdominal Aortic Aneurysm

David Nash, Faidon Kyriakou, William Dempster, 2019, Scientific Reports.

On the experimental testing of fine Nitinol wires for medical devices.

D. Nash, E Henderson, D H Nash, 2011, Journal of the mechanical behavior of biomedical materials.

The Use of Effectiveness Concepts to Calculate the Thermal Resistance of Parallel Plate Heat Sinks

J. Deans, C. K. Lee, W. Dempster, 2006 .

Analysing The Cross-Section of The Abdominal Aortic Aneurysm Neck and Its Effects on Stent Deployment

D. Nash, W. Dempster, Faidon Kyriakou, 2020, Scientific Reports.

CFD study of fluid flow changes with erosion

Alejandro López, Matthew T. Stickland, William M. Dempster, 2018, Comput. Phys. Commun..

Efficiently Simulating an Endograft Deployment: A Methodology for Detailed CFD Analyses

David Nash, Faidon Kyriakou, William Dempster, 2020, Annals of Biomedical Engineering.

Modeling erosion in a centrifugal pump in an Eulerian-Lagrangian frame using OpenFOAM®

Matthew Stickland, William Dempster, Alejandro Lopez, 2015 .

Comparative study different erosion models in an Eulerian-Lagrangian frame using Open Source software

A. López, M. Stickland, W. Dempster, 2014 .

Prediction of blowdown of a pressure relief valve using response surface methodology and CFD techniques

J. Jia, Xinhai Yu, S. Tu, 2018 .

APPLIED THERMAL ENGINEERING 133 ( 2018 ) 713 – 726 Blowdown prediction of a pressure relief valve using a response surface methodology and CFD techniques

Liu Yang, Xinhai Yu, S. Tu, 2018 .

Study of mechanical aspects of leak tightness in a pressure relief valve using advanced FE-analysis

William Dempster, Ali A. Anwar, Yevgen Gorash, 2016 .

The testing and evaluation of trial refrigerants : Part 1. System description

J. S. Fleming, J. S. Fleming, Alex C. Bwalya, 2000 .

Literature research in relevant fields to understand pressure relief valve leak tightness in a static closed state

Robert Hamilton, William Dempster, Ali A. Anwar, 2015 .

A computational fluid dynamics model to evaluate the inlet stroke performance of a positive displacement reciprocating plunger pump

Matthew Stickland, William Dempster, Aldo Iannetti, 2014 .