J. Kwon

发表

Vacancy-type defects in cold-worked iron studied using positron annihilation techniques

H. Mohamed, J. Kwon, Yongmin Kim, 2007 .

Modeling of sink-induced irradiation growth of single-crystal and polycrystal zirconiums in nuclear reactors

S. Choi, J. Kim, J. Kwon, 2016 .

Specimen size effects on the weakening of a bulk metastable austenitic alloy

Sang-Kyun Lim, P. Hosemann, C. Shin, 2015 .

Modeling of Radiation Hardening Due to Point Defect Clusters in Stainless Steels

J. Kwon, Joo-Hag Kim, S. Kwon, 2002 .

Radiation Hardening in BWR Core Shrouds: Relative Roles of Neutron and Gamma Irradiation

J. Kwon, Athur Motta, 2001 .

Effect of Radiation Damage on Bwr Core-Shroud Cracking

A. Motta, J. Kwon, 1998 .

Atom probe tomography analysis of nanostructure evolution in Ni-Cr-Mo low alloy steel under neutron irradiation

Gyeong-Geun Lee, Hyung-Ha Jin, Kunok Chang, 2017 .

Multiscale Modeling of Radiation Hardening in Pressure Vessel Steels

Jun-Hwa Hong, J. Kwon, S. Kwon, 2003 .

Micropillar compression study of the influence of size and internal boundary on the strength of HT9 tempered martensitic steel

H. Guim, Sang-Kyun Lim, D. Jang, 2018 .

Development and testing of microcompression for post irradiation characterization of ODS steels

Sang-Kyun Lim, P. Hosemann, C. Shin, 2014 .

Modified preparation technique of TEM sample for various TEM analyses of structural materials

C. Shin, Hyung-Ha Jin, J. Kwon, 2012 .

Prediction of potential candidates for dispersion strengthening materials in Ni based alloys

J. Kim, K. Hong, Kunok Chang, 2016 .

Crack growth behavior of warm-rolled 316L austenitic stainless steel in high-temperature hydrogenated water

Kyoung Joon Choi, S. Hwang, Hyung-Ha Jin, 2016 .

Role of second-phase particle morphology on 3D grain growth: A phase-field approach

C. Rhee, Kunok Chang, J. Kwon, 2016 .

Room-temperature yield and fracture strength of single-crystalline 6H silicon carbide

Hyo-Haeng Jo, Sang-Kyun Lim, G. Sun, 2015, Journal of Materials Science.

Development of a fundamental crack tip strain rate equation and its application to quantitative prediction of stress corrosion cracking of stainless steels in high temperature oxygenated water

Tetsuo Shoji, T. Shoji, Qunjia Peng, 2004 .

Evolution of radiation defect and radiation hardening in heat treated SA508 Gr3 steel

C. Shin, Hyung-Ha Jin, J. Kwon, 2014 .

Irradiation induced dislocation loop and its influence on the hardening behavior of Fe–Cr alloys by an Fe ion irradiation

K. Oh, Dohyun Kim, C. Shin, 2008 .

Effect of stress on self-diffusion in bcc Fe: An atomistic simulation study

Byeong-Joo Lee, J. Kwon, J. Jang, 2010 .

A phase-field modeling of void swelling in the Austenitic stainless steel

Kunok Chang, J. Kwon, Gyeong-Geun Lee, 2016 .

A novel way to estimate the nanoindentation hardness of only-irradiated layer and its application to ion irradiated Fe-12Cr alloy

D. Kwon, W. Kim, Yakai Zhao, 2017 .

Observation of interaction behavior between microstructural defects and dislocation by in situ strain TEM examination

C. Shin, Hyung-Ha Jin, J. Kwon, 2013 .

Prediction of radiation hardening in reactor pressure vessel steel based on a theoretical model

Jun-Hwa Hong, J. Kwon, S. Kwon, 2003 .

Effects of crystallographic structure and Cr on the rate of void nucleation in BCC Fe: An atomistic simulation study

J. Shim, Byeong-Joo Lee, J. Kwon, 2008 .

Modeling of radiation‐induced sink evolution in 6061 aluminum alloy in nuclear reactors

J. Kwon, Gyeong-Geun Lee, Sang‐il Choi, 2016 .

Effects of helium and hydrogen on radiation-induced microstructural changes in austenitic stainless steel

Hyung-Ha Jin, J. Kwon, Sangyeop Lim, 2015 .

Using rate theory to better understand the stress effect of irradiation creep in iron and its based alloy

S. Choi, J. Kwon, E. Yoon, 2020, Journal of Nuclear Materials.

Contribution of microstructure to yield strength of X-750 alloy used for garter spring in Canada deuterium uranium reactor

Hyung-Ha Jin, J. Kwon, SangEun Kim, 2022, Journal of Nuclear Materials.

Observation and rate theory modeling of grain boundary segregation in Σ3 twin boundaries in ion-irradiated stainless steel 316

Yong-Bok Lee, Hyung-Ha Jin, J. Kwon, 2014 .

Embrittlement of Nickel-based Alloys by Helium Bubbles under Neutron Irradiation

Hyung-Ha Jin, J. Kwon, Gyeong-Geun Lee, 2018 .

Radiation damage to Ni-based alloys in Wolsong CANDU reactor environments

Hyung-Ha Jin, J. Kwon, Gyeong-Geun Lee, 2019, Nuclear Engineering and Technology.

Evaluation of critical resolved shear strength and deformation mode in proton-irradiated austenitic stainless steel using micro-compression tests

S. Hwang, C. Shin, Hyung-Ha Jin, 2016 .

Effect of irradiation temperature on microstructural changes in self-ion irradiated austenitic stainless steel

Sang-Kyun Lim, C. Shin, Hyung-Ha Jin, 2017 .

Prediction of radiation-induced yield stress increment in austenitic stainless steels by using a computational approach

C. Shin, J. Kwon, W. Kim, 2009 .

Phase-field Modeling of Precipitate Behavior in RPV Steel Using CALPHAD Database

Kunok Chang, J. Kwon, Gyeong-Geun Lee, 2018, Korean Journal of Metals and Materials.

Proton irradiation for radiation-induced changes in microstructures and mechanical properties of austenitic stainless steel

S. Hwang, Hyung-Ha Jin, J. Kwon, 2019, Journal of Nuclear Materials.

Fabrication of a TEM sample of ion-irradiated material using focused ion beam microprocessing and low-energy Ar ion milling.

C. Shin, Hyung-Ha Jin, J. Kwon, 2010, Journal of electron microscopy.

The role of Cr on oxide formation in Ni-Cr alloys: A theoretical study

J. Kim, K. Hong, Kunok Chang, 2018 .

Characterization of the martensite phase formed during hydrogen ion irradiation in austenitic stainless steel

Sang-Kyun Lim, Hyung-Ha Jin, J. Kwon, 2017 .

Modified embedded-atom method interatomic potential for the Fe-Cu alloy system and cascade simulations on pure Fe and Fe-Cu alloys

B. Wirth, J. Shim, Byeong-Joo Lee, 2005 .

Effects of cellular segregation for high strength and ductility of additively manufactured 304 L stainless steel

Bongsang Lee, Hyung-Ha Jin, Jung-Min Kim, 2022, Materials Characterization.

Gamma displacement cross-sections in various materials

A. Motta, J. Kwon, 2000 .

Effect of a sintering process on the electrical properties of SnO2 gas sensors.

J. Kwon, Duk Su Kim, Gyeong-Geun Lee, 2010, Journal of Nanoscience and Nanotechnology.

High Temperature Alloy Development for Future Nuclear Systems in Korea

Ji Yeon Park, Jinsung Jang, J. Kwon, 2013 .

Atom probe tomography analysis of radiation-induced solute clustering in austenite stainless steels

Kunok Chang, Hyung-Ha Jin, J. Kwon, 2018, Radiation Effects and Defects in Solids.

Effects of radiation-induced defects on microstructural evolution of Fe-Cr model alloys

Y. Kim, T. Toyama, J. Kwon, 2009 .

Comparison of the primary damage states in iron and nickel by molecular dynamics simulations

J. Kwon, W. Kim, J. Hong, 2006 .

Atom probe tomography analysis of nanostructure evolution in Ni-Cr-Mo low alloy steel under neutron irradiation

Kunok Chang, Bongsang Lee, Hyung-Ha Jin, 2017, Journal of Mechanical Science and Technology.

Investigation of Cr-atom clustering in Fe‒Cr model alloys under irradiation

C. Shin, Hyung-Ha Jin, J. Kwon, 2014 .

Effect of particle-matrix coherency on Zener pinning: A phase-field approach

C. Rhee, Kunok Chang, J. Kwon, 2018 .

Behavior of Mn-Ni-Si rich precipitate in RPV steel: Linking CALPHAD to phase-field method

Kunok Chang, J. Kwon, Gyeong-Geun Lee, 2017 .

Evaluation of Mechanical Properties of Additive-Manufactured Stainless Steel for Nuclear Applications

Jung-Min Kim, Hyung-Ha Jin, J. Kwon, 2020 .

Atomistic Analysis Of Radiation-Induced Segregation In Ion-Irradiated Stainless Steel 316

Kunok Chang, Hyung-Ha Jin, J. Kwon, 2015 .