C. Chang

发表

Surface quality, microstructure, mechanical properties and tribological results of the SKD 61 tool steel with prior heat treatment affected by the deposited energy of continuous wave laser micro-polishing

C. Chung, J. Lin, C. Chang, 2016 .

Effects of annealing temperature on microstructure, surface roughness, mechanical and tribological properties of Ni–P and Ni–P/SiC films

C. Chung, M. Ger, J. Lin, 2016 .

Surface quality, microstructure, and mechanical properties of the SKD 61 tool steel with prior heat treatment affected by single- and double-pass continuous wave laser polishing

C. Chung, J. Lin, Kai Yang, 2017 .

Influence of laser beam fluence on surface quality, microstructure, mechanical properties, and tribological results for laser polishing of SKD61 tool steel

J. Lin, T. Chen, Sung-Ho Liu, 2016 .

Effect of femtosecond laser power and overlap ratio on surface roughness parameters, contact angle, and tribological properties of the textured SKD 61 tool steel with oil lubrication

C. Chung, Tsung-Wen Tsai, J. Lin, 2020, Surface Topography: Metrology and Properties.

Evaluations of heat treatment on polymer adhesive bonding and thermal-induced failure of two-layer through-silicon via structures

C. Chung, Wen-Luh Yang, J. Lin, 2019, Sensors and Actuators A: Physical.

Surface polishes of the SKD 61 tool steel by a femto pulse laser operating in a wide range of powers

C. Chung, J. Lin, C. Chang, 2020 .

Effects of deposition method and conditions for IGZO film and thermal annealing on composite film quality, surface roughness, microstructural defects, and electrical properties of Ti/IGZO/graphene/polyimide specimens

J. Lin, C. Chang, T. Li, 2018, Journal of Alloys and Compounds.

Surface quality, microstructure, and mechanical properties of the SKD 61 tool steel with prior heat treatment affected by single- and double-pass continuous wave laser polishing

C. Chung, J. Lin, C. Chang, 2017, The International Journal of Advanced Manufacturing Technology.

Establishment of the Model Widely Valid for the Melting and Vaporization Zones in Selective Laser Melting Printings Via Experimental Verifications

Tsung-Wen Tsai, J. Lin, Sung-Ho Liu, 2021, International Journal of Precision Engineering and Manufacturing-Green Technology.

Establishment of the Model Widely Valid for the Melting and Vaporization Zones in Selective Laser Melting Printings Via Experimental Verifications

Tsung-Wen Tsai, J. Lin, Sung-Ho Liu, 2021, International Journal of Precision Engineering and Manufacturing-Green Technology.

Effects of fluorination of carbon film and annealing conditions on side leakage current and current breakdown time of SiO2/graphene/Cu/Ti/SiO2/Si specimens

Chao‐Sung Lai, J. Lin, Chang-Fu Han, 2020 .

Study of the Electrical and Diffusion Barrier Properties in Ultrathin Carbon Film-Coated Copper Microwires for Interconnects

J. Lin, C. Chang, T. Li, 2019, Journal of Materials Engineering and Performance.

Effects of AZO film as inductive layer and annealing temperature on microstructure crystallinity and electrical and optical properties of IGZO/SiO2 and IGZO/AZO/SiO2 specimens

J. Lin, Chang-Fu Han, C. Chang, 2020 .