R. Komanduri

发表

Developments and Trends in Monitoring and Control of Machining Processes

G. Chryssolouris, I. Inasaki, R. Komanduri, 1988 .

Knowledge-based expert systems for manufacturing

R. Komanduri, S.C.Y. Lu, R. Komanduri, 1987 .

Some aspects of machining with negative rake tools simulating grinding

R. Komanduri, R. Komanduri, 1971 .

Modeling, sensing and control of manufacturing processes

K. Srinivasan, David E. Hardt, R. Komanduri, 1987 .

Effect of Tool Edge Geometry on Energy Dissipation in Ultraprecision Machining

Don A. Lucca, R. Komanduri, Y. W. Seo, 1993 .

Review Of Precision Surface Generating Processes And Their Potential Application To The Fabrication Of Large Optical Components

R. Komanduri, I. F. Stowers, E. D. Baird, 1989, Optics & Photonics.

Cutting-tool Materials

R. Komanduri, 2001 .

Experimental dynamics characterization and monitoring of MRR in oxide chemical mechanical planarization (CMP) process

R. Komanduri, Prahalad K. Rao, S. Bukkapatnam, 2008 .

Wireless sensing of flow-induced vibrations for pipeline integrity monitoring

R. Komanduri, A. Awawdeh, S.T.S. Bukkapatnam, 2006, Fourth IEEE Workshop on Sensor Array and Multichannel Processing, 2006..

Nonlinear Sequential Bayesian Analysis-Based Decision Making for End-Point Detection of Chemical Mechanical Planarization (CMP) Processes

R. Komanduri, Zhenyu Kong, O. Beyca, 2011, IEEE Transactions on Semiconductor Manufacturing.

Machining fiber-reinforced composites

R. Komanduri, R. Komanduri, 1997 .

Micromachining of silicon by short-pulse laser ablation in air and under water

R. Komanduri, Y. Ogawa, Lionel M. Raff, 2004 .

Molecular dynamic simulations of uniaxial tension at nanoscale of semiconductor materials for micro-electro-mechanical systems (MEMS) applications

N. Chandrasekaran, R. Komanduri, Lionel M. Raff, 2003 .

On the ductile machining of silicon for micro electro-mechanical systems (MEMS), opto-electronic and optical applications

R. Komanduri, T. Shirakashi, Jiwang Yan, 2001 .

Thermal analysis of laser surface transformation hardening—optimization of process parameters

R. Komanduri, Zhen Bing Hou, R. Komanduri, 2004 .

A new method for molecular dynamics simulation of nanometric cutting

N. Chandrasekaran, R. Komanduri, L. Raff, 1998 .

Thermal analysis of the laser surface transformation hardening process

R. Komanduri, R. Komanduri, Z. Hou, 2001 .

Molecular dynamics investigations on polishing of a silicon wafer with a diamond abrasive

Satish T. S. Bukkapatnam, R. Komanduri, Lionel M. Raff, 2010 .

Molecular dynamics simulations of diffusion of carbon into iron

Satish T. S. Bukkapatnam, R. Komanduri, Lionel M. Raff, 2008 .

MD simulation of exit failure in nanometric cutting

N. Chandrasekaran, R. Komanduri, Lionel M. Raff, 2001 .

On the Possibility of Chemo-Mechanical Action in Magnetic Float Polishing of Silicon Nitride

R. Komanduri, R. Komanduri, N. Umehara, 1996 .

Multiscale simulation from atomistic to continuum – coupling molecular dynamics (MD) with the material point method (MPM)

R. Komanduri, R. Komanduri, N. Daphalapurkar, 2006 .

M.D. Simulation of nanometric cutting of single crystal aluminum–effect of crystal orientation and direction of cutting

N. Chandrasekaran, R. Komanduri, L. Raff, 2000 .

Tribology in Metal Cutting—Some Thermal Issues

R. Komanduri, R. Komanduri, Z. Hou, 2001 .

Special Issue on US Machining and Grinding Research in the 20th Century: Portrait Gallery of Pioneers

M. E. Merchant, R. Komanduri, M. C. Shaw, 1993 .

Effect of tool geometry in nanometric cutting: a molecular dynamics simulation approach

N. Chandrasekaran, R. Komanduri, L. Raff, 1998 .

On the diffusion wear of diamond in grinding pure iron

R. Komanduri, R. Komanduri, M. C. Shaw, 1976 .

Two-Dimensional Mixed Mode Crack Simulation Using the Material Point Method

R. Komanduri, R. Komanduri, B. Wang, 2005 .

Finite element simulation of plane strain plastic–elastic indentation on single-crystal silicon

N. Chandrasekaran, Masahiko Yoshino, Takayuki Aoki, 2001 .

Chemical Mechanical Polishing (CMP) in Magnetic Float Polishing (MFP) of Advanced Ceramic (Silicon Nitride) and Glass (Silicon Dioxide)

R. Komanduri, Mao Fa Jiang, 2001 .

On the mechanism of material removal at the nanoscale by cutting

N. Chandrasekaran, R. Komanduri, S. Varghese, 2010 .

Molecular dynamics (MD) simulation of uniaxial tension of some single-crystal cubic metals at nanolevel

N. Chandrasekaran, R. Komanduri, L. Raff, 2001 .

Multiscale simulation using Generalized Interpolation Material Point (GIMP) method and Molecular Dynamics (MD)

Richard D. Hornung, Andrew M. Wissink, R. Komanduri, 2006 .

Chemo-mechanical magneto-rheological finishing (CMMRF) of silicon for microelectronics applications

V. K. Jain, Prabhat Ranjan, R. Komanduri, 2010 .

Diamond coatings on cemented tungsten carbide tools by low-pressure microwave CVD

R. Komanduri, R. Komanduri, K Mallika, 1999 .

A combined Monte Carlo-damped trajectory simulation of nanometric testing of fcc metals under uniaxial tension

R. Komanduri, L. Raff, R. Komanduri, 2002 .

A phenomenological model of polishing of silicon with diamond abrasive

Satish T. S. Bukkapatnam, R. Komanduri, Lionel M. Raff, 2010 .

Advances in non-traditional machining

R. Komanduri, K. P. Rajurkar, G. Sathyanarayanan, 1986 .

Some experiments on the scratching of silicon:: In situ scratching inside an SEM and scratching under high external hydrostatic pressures

Masahiko Yoshino, Takayuki Aoki, Takahiro Shirakashi, 2001 .

Molecular dynamics simulation of the nanometric cutting of silicon

R. Komanduri, L. Raff, R. Komanduri, 2001 .

Manufacturing simulation and processes

R. Komanduri, A. A. Tseng, D. R. Durham, 1987 .

On the advanced lapping process in the precision finishing of thin-film magnetic recording heads for rigid disc drives

R. Komanduri, M. Jiang, R. Komanduri, 2003 .

Input vector optimization of feed-forward neural networks for fitting ab initio potential-energy databases.

R. Komanduri, M. Malshe, M. Hagan, 2010, The Journal of chemical physics.