Naksoo Kim

发表

Optimum Blank Design of Automobile Sub-Frame

Jong-Yop Kim, Naksoo Kim, Man-Seong Heo, 1998 .

Preform design in H-shaped cross sectional axisymmetric forging by the finite element method

Naksoo Kim, Shiro Kobayashi, 1990 .

Study on the FE analysis method to predict and minimize roof micro-deformation during paint process

Naksoo Kim, Hyunsoo Jeong, Changsuk Oh, 2013 .

Micro deformation of automobile hood in dipping process using stiffness

Naksoo Kim, Nahmkeon Hur, Jae Hoon Kim, 2014 .

Numerical-empirical-based function for the assessment of the stiffness distribution on automotive body panels

Luca Quagliato, Naksoo Kim, Donghwi Park, 2019 .

Study on twisting and bowing of roll formed products made of high strength steel

Naksoo Kim, Wan-gi Cha, Naksoo Kim, 2013, International Journal of Precision Engineering and Manufacturing.

Robust design of roll-formed slide rail using response surface method

Naksoo Kim, Minjin Oh, Moon Kyu Lee, 2010 .

Design study of the geometry of the blanking tool to predict the burr formation of Zircaloy-4 sheet

Naksoo Kim, Dongchul Kim, Hyungyil Lee, 2013 .

Run-out Based Crossed Roller Bearing Life Prediction by Utilization of Accelerated Testing Approach and FE Numerical Models

Luca Quagliato, Naksoo Kim, Soyoung Hwang, 2017 .

Forming and drawing characteristics of tailor welded sheets in a circular drawbead

Naksoo Kim, Heon Young Kim, Hongjong Kim, 2000 .

Radial forging of aluminum to steel preform for the production of light-weighted wheel bearing outer race

Luca Quagliato, Guido Berti, Naksoo Kim, 2017 .

Study on micro deformation of automobile roof with mastic sealer after oven process

Naksoo Kim, Jiseop Kim, Jihoon Hwang, 2014 .

Accelerated Life Testing to Predict Service Life and Reliability for an Appliance Door Hinge

Naksoo Kim, Joseph P. Domblesky, Hyunsoo Jeong, 2015 .

Development of oil canning index model for sheet metal forming products with large curvature

Naksoo Kim, Seokmoo Hong, Honglae Kim, 2017 .

Optimum design of the cored linear motor using experiment design

Naksoo Kim, Sung-Ill Seo, S. Seo, 2009 .

Numerical Investigation of the Effect of Process Parameters during Aluminium Wheel Flow-Forming

Naksoo Kim, Cheol-Soo Lee, So Young Hwang, 2015 .

Physical and numerical modeling of hot closed-die forging to reduce forging load and die wear

Naksoo Kim, Heon Young Kim, Joong-Jae Kim, 1994 .

An evaluation technique for forming limit strains of zircaloy-4 and zirlo sheets based on FEA solutions

Min-Soo Kim, Naksoo Kim, Hyungyil Lee, 2013 .

OPTIMUM DESIGN OF THE ROLL FORMED SLIDE RAIL BY MATERIAL SUBSTITUTION

Naksoo Kim, Minjin Oh, 2008 .

A study on the bearingless switched reluctance rotation motor with improved motor performance

Naksoo Kim, Jaeyoon Wang, Sang-Jo Kim, 2013 .

Robust optimum design of a bearingless rotation motor using the Kriging model

Naksoo Kim, Moon Kyu Lee, Sung-Ill Seo, 2011 .

Optimum design of roll forming process of slide rail using design of experiments

Naksoo Kim, Minjin Oh, Naksoo Kim, 2008 .

Optimum shape and process design of single rotor equipment for its mixing performance using finite volume method

Naksoo Kim, Jae Yeol Lee, Jae Yeol Lee, 2009 .

Experiment and Numerical Study of Wear in Cross Roller Thrust Bearings

Naksoo Kim, So Young Hwang, Na Ra Lee, 2015 .

Process sequence design of large axi-symmetric forging product of AISI4130 in nozzle type

Yong-Taek Im, Naksoo Kim, Eundeog Chu, 1995 .

Preform design of hybrid-forming process to make sheet metal IT products with a sharp edge

Naksoo Kim, Hyunsoo Jeong, Seokmoo Hong, 2015 .

Optimal design to reduce the maximum load in ring rolling process

Naksoo Kim, Kai Jin, Honglae Kim, 2012 .

Finite-element analysis and experimental verification for drawbead drawing processes

Naksoo Kim, Young-Moo Heo, Daegyo Seo, 1997 .

A Study on the Development of Dedicated FEA Tool for Roll Forming of Arbitrary Cross Sections

Naksoo Kim, Wan-gi Cha, Honglae Kim, 2011 .

A study on process improvements of multi-stage deep-drawing by the finite-element method

Naksoo Kim, Hyung-Jong Kim, Byung-Hee Jeon, 1995 .

Minimizing the axial force and the material build-up in the tube flow forming process

Naksoo Kim, Kai Jin, Honglae Kim, 2013 .

Multivariable regression and gradient boosting algorithms for energy prediction in the radial-axial ring rolling (rarr) process

Luca Quagliato, Guido Berti, Naksoo Kim, 2021 .

A New Approach to Preform Design in Metal Forging Processes Based on the Convolution Neural Network

Luca Quagliato, Naksoo Kim, Donghwi Park, 2021, Applied Sciences.

Machine Learning-Based Models for the Estimation of the Energy Consumption in Metal Forming Processes

Luca Quagliato, Guido Berti, Naksoo Kim, 2021, Metals.

AN ANALYSIS OF MOLDING AND CURING OF SMC BY THE FINITE ELEMENT METHOD

Naksoo Kim, 1992 .

A parametric study on forming length in roll forming

Naksoo Kim, Naksoo Kim, Sukmoo Hong, 2001 .

Analysis of wire-drawing process with friction and thermal conditions obtained by inverse engineering

Naksoo Kim, Changsun Moon, Naksoo Kim, 2012 .

Finite element modeling of the deformation behavior of semi-solid materials

Yong-Taek Im, Naksoo Kim, Jong-Hoon Yoon, 2001 .

Buckling Analysis of Roll Forming Process using Finite element method

Naksoo Kim, Jong-Hun Kim, Young-In Kim, 2003 .

Study on Dimensional Change in Wire Product During Wire-Drawing Process

Naksoo Kim, Changsun Moon, Naksoo Kim, 2012 .

Numerical analysis and optimal design to reduce residual stresses and deformations of die casting baseplate after ejection

Naksoo Kim, Kai Jin, Naksoo Kim, 2015 .

Numerical simulations and experiments on fabricating bend pipes by push bending with local induction-heating process

Naksoo Kim, Kai Jin, Hui Wang, 2016 .

Rigid–thermoviscoplastic finite-element analysis of the semi-solid forging of Al2024

Yong-Taek Im, Naksoo Kim, Y. Im, 1999 .

Three-dimensional simulation of gap-controlled plate rolling by the finite element method

Naksoo Kim, Shiro Kobayashi, Naksoo Kim, 1990 .

Optimum conditions for parallel translation of maxillary anterior teeth under retraction force determined with the finite element method.

Naksoo Kim, Joungsik Suh, Naksoo Kim, 2010, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.

A Study on Roll Wear in the Roll Forming Process

Naksoo Kim, Byung-Seok Kang, 2003 .

The prediction of deformation behavior and interfacial friction under hot working conditions using inverse analysis

Naksoo Kim, Hong-Seok Choi, 2008 .

Ring rolling process simulation by the three dimensional finite element method

Naksoo Kim, Susumu Machida, Shiro Kobayashi, 1990 .

Prediction of tool wear in the blanking process using updated geometry

Naksoo Kim, Seunghyeon Cheon, Naksoo Kim, 2016 .