Lakhdar Boulanouar

发表

Application of response surface methodology in describing the performance of mixed ceramic tool when turning AISI 4140 steel

M. Elbah, H. Aouici, Ikhas Meddour, 2016 .

Investigation and modeling of cutting forces and surface roughness when hard turning of AISI 52100 steel with mixed ceramic tool: cutting conditions optimization

M. Elbah, Mohamed Athmane Yallese, Lakhdar Boulanouar, 2015 .

Statistical Analysis of Surface Roughness and Tool Life Using (RSM) in Face Milling

Salim Belhadi, Lakhdar Boulanouar, Mohieddine Benghersallah, 2015 .

Usinage de l'acier 100Cr6 trempé par un outil en nitrure de bore cubique

Kamel Chaoui, Mohamed Athmane Yallese, Lakhdar Boulanouar, 2004 .

Modeling and multi-objective optimization of surface roughness and productivity in dry turning of AISI 52100 steel using (TiCN-TiN) coating cermet tools

Lakhdar Boulanouar, Ouahid Keblouti, Mohamed Walid Azizi, 2017 .

Statistical analysis of AISI304 austenitic stainless steel machining using Ti(C, N)/Al2O3/TiN CVD coated carbide tool

Tarek Mabrouki, Mohamed Athmane Yallese, Lakhdar Boulanouar, 2015 .

Mathematical modeling for turning on AISI 420 stainless steel using surface response methodology

Tarek Mabrouki, Kamel Chaoui, Mohamed Athmane Yallese, 2015 .

Technologies de Production Mécanique : Un premier master professionnalisant en mécanique à l'Université d'Annaba

Sami Chatti, Abdelaziz Amirat, Kamel Chaoui, 2013 .

Multi response optimization of surface roughness in hard turning with coated carbide tool based on cutting parameters and tool vibration

Lakhdar Boulanouar, Ouahid Keblouti, Mohamed Walid Azizi, 2019 .

The effects of cutting conditions on mixed ceramic and cubic boron nitride tool wear and on surface roughness during machining of X200Cr12 steel (60 HRC)

Jean-François Rigal, Kamel Chaoui, Mohamed Athmane Yallese, 2005 .