Yoshitaka Tanimizu

发表

F-0613 User interface systems for holonic manufacturing system simulation

Nobuhiro Sugimura, Yoshitaka Tanimizu, Kouji Iwamura, 2001 .

Integrated Production and Transportation Scheduling for Low-Carbon Supply Chains

Yoshitaka Tanimizu, Hiromasa Ito, Kenta Matsui, 2017 .

Improvement of crossover operator in genetic algorithm for reactive scheduling(Manufacturing systems and Scheduling)

Nobuhiro Sugimura, Yoshitaka Tanimizu, Keiichi Shirase, 2005 .

A Study on Integrated Process Planning and Scheduling System for Holonic Manufacturing

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2006 .

Modeling of Job Selection Criteria by Machining Center based on Deep Reinforcement Learning

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2016 .

Production Cost Analysis and Production Planning for Plant Factories Considering Markets

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2015, APMS.

Autonomous Agents for Dynamic Process Planning in the Flexible Manufacturing System

Hossein Tehrani Nik Nejad, Nobuhiro Sugimura, Koji Iwamura, 2009 .

210 Evaluation of multi-layered dynamic supply chain models by using simulation

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2011 .

S1402-2-2 A Study on Facility Layout with Feedback of Execution Data

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2009 .

A Study on Reactive Scheduling for Hierarchical and Decentralized Manufacturing Systems

Nobuhiro Sugimura, Yoshitaka Tanimizu, Tatsuhiko Sakaguchi, 2002 .

Manufacturing phronesis (a report on higher skills analysis and proposals for phronesis cultivation)

Yoshitaka Tanimizu, Kazuaki Iwata, Masahiko Onosato, 2010 .

2103 A Study on Integrated Reactive Scheduling Using Co-evolutionary Genetic Algorithm

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2008 .

214 Scheduling Systems by Using 3D CAM Aimed at High Production Efficiency for 5-Axis Machine Tools

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2015 .

S1440101 Development of a production scheduling system using a diffuse co-evolutionary genetic algorithm

Yoshitaka Tanimizu, Nobuhiro Sugimura, Hideyuki Nonomiya, 2015 .

S1401-1-3 Selection of orders by parallel and distributed scheduling in dynamic supply chains

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2009 .

Analysis of kinematic motion deviations of machining centers based on geometric tolerances

Koji Iwamura, Yoshitaka Tanimizu, Nobuhiro Sugimura, 2014 .

1323 A Study on Genetic Algorithm Based Multi-objective Reactive Scheduling

Yoshitaka Tanimizu, Nobuhiro Sugimura, Tatsuhiko Sakaguchi, 2005 .

1101 A Study on Scheduling System Considering Statistical Distribution of Operation Time : Application to Real-time Scheduling based on Tardiness

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2007 .

A Study on Support System for Re-design of Production Lines based on Cluster Analysis

Nobuhiro Sugimura, Yoshitaka Tanimizu, Tomohito Imai, 2002 .

Extension of reactive scheduling method using co-evolutionary genetic algorithms (application to open shop scheduling problems and experimental evaluation)

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2013 .

Analysis of Kinematic Motion Deviations of Rotary Tables Based on Geometric Tolerances

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2012 .

Design Process Support for Production Lines : Reconfiguration of Production Lines by using Numerical Analysis

Yoshitaka Tanimizu, Nobuhiro Sugimura, Takayuki Yoneda, 2003 .

A Real-time Scheduling of Holonic Manufacturing System

Nobuhiro Sugimura, Yoshitaka Tanimizu, Kazutaka Inoue, 2000 .

4110 Genetic Algorithm Based Reactive Scheduling : Generation Method of Initial Individuals for Additional Jobs

Nobuhiro Sugimura, Yoshitaka Tanimizu, Keiichi Shirase, 2005 .

Development of scheduling system considering statistical distribution of machining time executed by human operators

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2010 .

Optimal disassembly scheduling considering post disassembly processes with genetic programming

Yoshitaka Tanimizu, Yousuke Tanaka, 2019 .

312 Work scheduling considering preferences of human operators and simulation for evaluation

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2010 .

2108 Simulation based real-time scheduling for Holonic Manufacturing Systems

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2006 .

Consistency Management among Various Models for Production Planning

Nobuhiro Sugimura, Yoshitaka Tanimizu, Masaharu Kurosawa, 1998 .

Negotiation Strategy for Economical Reuse in Closed-Loop Supply Chains

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2014, APMS.

201 Real-time scheduling method using reinforcement learning for Holonic Manufacturing Systems

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2006 .

4109 A study on a real-time scheduling of Holonic Manufacturing Systems : Determination of effectiveness values based on expectation value of objective function

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2005 .

S142014 Education Planning of Human Operators by Using Mathematical Programming

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2012 .

New approaches towards "service manufacturing system" and "resilient manufacturing"

Yoshitaka Tanimizu, Toshiya Kaihara, 2014 .

1102 ホロニック生産システムにおける効用値に基づくリアルタイムスケジューリング : すべてのホロンが将来の状態の予測を行う手法(OS1-1 生産スケジューリング)

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2007 .

2202 A Study on Human Oriented Autonomous Distributed Manufacturing Systems : Real-time Scheduling Method Based on Preference of Human Operators

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2008 .

2204 Development of scheduling system considering statistical distribution of machining time by human operators

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2009 .

Human-Oriented Dynamic Task Reallocation and Rescheduling in Cellular Manufacturing Systems

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2010 .

A Human Oriented Real-Time Scheduling for Autonomous Distributed Manufacturing System: Control of Preferences of Human Operators Aimed at Improving Productivity

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2012 .

A study on torelance design of five-axis machining centers

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2016, 2016 International Symposium on Flexible Automation (ISFA).

1510 A study on a real-time scheduling of Holonic Manufacturing Systems : Evaluation criteria of utility values based on reinforcement learning for holons

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2006 .

A study on development of a work instruction system for assembly cells based on analysis of learning processes

Yoshitaka Tanimizu, Satoru Ishii, Takashi Yokotani, 2014 .

F-0617 Reactive Scheduling for Hierarchical and Decentralized Manufacturing Systems : Application of GA

Nobuhiro Sugimura, Yoshitaka Tanimizu, Tatsuhiko Sakaguchi, 2001 .

An evolutionary algorithm for assembly scheduling problems with release times

Yoshitaka Tanimizu, Ryota Nakatani, 2017 .

1203 ホロニック生産システムにおけるリアルタイムスケジューリングに関する研究 : 効用に基づく意思決定プロセス

Nobuhiro Sugimura, Yoshitaka Tanimizu, Kouji Iwamura, 2002 .

1319 Development of Computer Aided Support System for Manufacturing System Engineering

Nobuhiro Sugimura, Yoshitaka Tanimizu, Tomokazu Nagata, 2000 .

S141013 A study on allocation of human operators considering statistical distribution of machining time

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2011 .

1511 A study on multi-agent based supply chain configuration considering production schedules

Nobuhiro Sugimura, Yoshitaka Tanimizu, Masahiko Yamanaka, 2006 .

A Study on Scheduling of Holonic Manufacturing Systems

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2002 .

A partial modification method for disturbed production schedules by using hybrid genetic algorithm

Yoshitaka Tanimizu, Tomoya Tanikawa, 2017 .

2101 ホロニック生産システムにおけるリアルタイムスケジューリングに関する研究 : 加工プロセスと搬送プロセスを行う作業者ホロン(OS2 生産スケジューリング)

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2006 .

Simulation based real-time scheduling method for holonic manufacturing systems - Method for reducing calculation time of simulation

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2007 .

Improvement of reactive scheduling system for setup time

Nobuhiro Sugimura, Yoshitaka Tanimizu, Tatsuhiko Sakaguchi, 2004 .

A Study on Real-time Scheduling for Holonic Manufacturing Systems - Application of Reinforcement Learning -

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2010 .

D024 Analysis of Kinematic Motion Deviations of Machining Centers Based on Geometric Tolerances

Koji Iwamura, Yoshitaka Tanimizu, Atsushi Takahashi, 2007 .

202 A Study on Scheduling System Considering Statistical Distribution of Operation Time

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2006 .

Flexible Multi-Layered Dynamic Supply Chain Models with Cooperative Negotiation

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2013, Int. J. Autom. Technol..

Real-time scheduling for holonic manufacturing systems based on estimation of future status

Nobuhiro Sugimura, Yoshitaka Tanimizu, Kouji Iwamura, 2006 .

Genetic Algorithm Based Reactive Scheduling (2nd Report, Modification of Production Schedule for Additional Jobs)

Nobuhiro Sugimura, Yoshitaka Tanimizu, Tatsuhiko Sakaguchi, 2005 .

Object-oriented simulation of real-time scheduling in holonic manufacturing systems

Nobuhiro Sugimura, Yoshitaka Tanimizu, S. Ae, 1999, APMS.

309 Development and Evaluation of Dynamic Production Management System Using Multi-Objective Hybrid Genetic Algorithms for Cellular Manufacturing

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2013 .

Optimal Disassembly Scheduling with a Genetic Algorithm

Yoshitaka Tanimizu, Hideyuki Nonomiya, 2017 .

307 Proposal and experimental evaluation of reactive scheduling method for machining and assembly processes

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2013 .

S141014 Analysis of Learning Processes and Development of a Work Support System in Cellular Manufacturing

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2011 .

A Study on estimation of three-dimensional tolerances based on simulation of virtual machining in turning processes including kinematic motion deviations

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2015 .

Evolutional reactive scheduling for agile manufacturing systems

Nobuhiro Sugimura, Yoshitaka Tanimizu, Kouji Iwamura, 2006 .

Case based design support system for manufacturing lines

Nobuhiro Sugimura, Yoshitaka Tanimizu, Tomohito Imai, 2002 .

A Study on Modeling and Analysis of Kinematic Motion Deviations of Machine Tools (1st Report, Modeling and Analysis of Geometric Deviations of Constituting Units)

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2005 .

A Search Algorithm for Generating Alternative Process Plans in Flexible Manufacturing System

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2007 .

Computational evaluation of order selection methods in dynamic supply chains

Nobuhiro Sugimura, Yoshitaka Tanimizu, Yasuhiro Maeda, 2012 .

410 A Study on Reactive Scheduling based on Genetic Algorithm : Modify the production schedules from the viewpoint of tardiness

Yoshitaka Tanimizu, Nobuhiro Sugimura, Kazuhiro Harada, 2004 .

1509 A study on reallocation toward tardiness of cellular manufacturing systems

Nobuhiro Sugimura, Yoshitaka Tanimizu, Akira Bandai, 2006 .

427 Extension of a reactive scheduling method using a diffuse co-evolutionary genetic algorithm

Yoshitaka Tanimizu, Nobuhiro Sugimura, Michisuke Sakamoto, 2014 .

A study on real-time scheduling of holonic manufacturing systems (5th report, estimation method of future status without decision criteria of other holons)

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2008 .

A study on a real-time scheduling of Holonic Manufacturing Systems : Determination of effectiveness values based on estimation

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2004 .

3-A-4 A STUDY ON REAL-TIME SCHEDULING FOR HOLONIC MANUFACTURING SYSTEM

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2002 .

ホロニック生産システムにおけるリアルタイムスケジューリングに関する研究 : 第1報,効用値に基づく意思決定プロセス(機械要素,潤滑,工作,生産管理など)

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2003 .

A study on supercooling processes of leaf lettuces produced in plant factory

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2016, 2016 International Symposium on Flexible Automation (ISFA).

A basic study on development of a multiple-layered dynamic supply chain model for machining and assembly processes

Yoshitaka Tanimizu, Ryota Nakatani, 2016 .

A Study on A Real-Time Scheduling of Holonic Manufacturing Systems (2nd Report, Determination of Effectiveness Values Based on Estimation of Future Status of HMS)

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2004 .

718 Astudy on motion analysis for nursing operationsbased on two-dimensional skeletal model

Koji Iwamura, Yoshitaka Tanimizu, Nobuhiro Sugimura, 2011 .

1318 A Study on Production Schedules Considering Statistical Distribution of Operation Time

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2007 .

208 A Study on Education Plan of Human Operators Considering Production Schedules : Modeling of Manufacturing System for Education Plan

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2011 .

A Study on Development of Adaptive Strategies in Dynamic Supply Chains : Extension of Two-Layered Model Considering Transportation Constraint(Machine Elements, Design and Manufacturing)

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2010 .

409 A study on a real-time scheduling of holonic manufacturing systems : Determination of effectiveness values based on estimation

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2004 .

A Study on Object-Oriented Model Repository for Manufacturing System Modeling

Nobuhiro Sugimura, Yoshitaka Tanimizu, Kazuaki Iwata, 1998, PROLAMAT.

1512 A study on genetic algorithm based reactive scheduling : Improvement of crossover for multi-objective optimization

Nobuhiro Sugimura, Yoshitaka Tanimizu, Tsuyoshi Miyamae, 2006 .

A study on transportation processes of autonomous distributed AGV based on social force model

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2016, 2016 International Symposium on Flexible Automation (ISFA).

A study on tolerance design of machine tool components based on shape generation motions

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2016 .

416 Reactive Scheduling System for Unscheduled Input of Emergent Jobs

Nobuhiro Sugimura, Yoshitaka Tanimizu, Tatsuhiko Sakaguchi, 2003 .

Modeling and Simulation of Closed-Loop Supply Chains Considering Economic Efficiency

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2013, APMS.

Applying Multi-agent Reinforcement Learning to Autonomous Distributed Real-time Scheduling

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2013 .

A Study on Real-Time Scheduling for Holonic Manufacturing Systems - Determination of Utility Values Based on Multi-agent Reinforcement Learning

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2009, HoloMAS.

119 Manufacturing Phronesis : the present situation of higher skills observed in research studies of domestic manufactures

Yoshitaka Tanimizu, Kazuaki Iwata, Masahiko Onosato, 2010 .

GENETIC ALGORITHM BASED REACTIVE SCHEDULING IN MANUFACTURING SYSTEM –ADVANCED CROSSOVER METHOD FOR TARDINESS MINIMIZATION PROBLEMS–

Nobuhiro Sugimura, Yoshitaka Tanimizu, Tatsuhiko Sakaguchi, 2007 .

Lean production and transportation scheduling for dynamic supply chain management

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2010, 2010 8th IEEE International Conference on Industrial Informatics.

A multi-layered model for dynamic supply chain configuration

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2007 .

404 A Study on the re-design of production line using numerical analysis method

Yoshitaka Tanimizu, Nobuhiro Sugimura, Takayuki Yoneda, 2004 .

Description and Analysis of Manufacturing System Engineering Process

Nobuhiro Sugimura, Yoshitaka Tanimizu, Keiji Mitsuyuki, 2002 .

103 A Study on Modeling and Analysis of Motion Deviations of Machine Tools : Rotary Tables

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2010 .

A Study on Real-Time Scheduling of Holonic Manufacturing Systems (4th Report, Multi-objective Optimization Process for Individual Holons and Whole HMSs)

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2006 .

3363 Extension of a Reactive Scheduling Method Using Co-evolutionary Genetic Algorithms under Precedence Constraints

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2011 .

Mathematical Analysis of Three-dimensional Geometric Tolerances of Mechanical Products : Analysis under Maximum Material Condition(Digital design and digital manufacturing (continued))

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2005 .

A Study on Real-Time Scheduling of Holonic Manufacturing Systems (3rd Report, Modeling of Decision Criteria of Utility Values for Estimation of Future Status of HMS)

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2006 .

3102 A Study on Dynamic Production Management using Hybrid Evolutionary Computation Algorithms in Cellular Manufacturing Systems

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2009 .

Agent-based Dynamic Process Planning and Scheduling in Flexible Manufacturing System

Hossein Tehrani Nik Nejad, Nobuhiro Sugimura, Koji Iwamura, 2008 .

D026 A Work Instruction System Based on an Analysis of Learning Processes for Assembly Cells

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2013 .

3A1 CO-EVOLUTIONARY GENETIC ALGORITHMS FOR REACTIVE SCHEDULING

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2009 .

Experimental verification of reactive scheduling system for disassembly processes

Yoshitaka Tanimizu, Hideyuki Nonomiya, Tomoya Tanikawa, 2017 .

Analysis of Kinematic Motion Deviations of Machining Centers with Rotational Axis Based on Geometric Tolerances

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2012 .

Optimal disassembly scheduling using an evolutionary algorithm based on a tree structure

Yoshitaka Tanimizu, Yousuke Tanaka, 2018 .

1313 A Study on Production Scheduling for Hierarchical and Decentralized Manufacturing Systems

Nobuhiro Sugimura, Yoshitaka Tanimizu, Kouji Iwamura, 2000 .

Development of a work instruction system based on analysis of learning processes for cellular manufacturing

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2014 .

GA Based Reactive Scheduling for Aggregate Production Scheduling

Yoshitaka Tanimizu, Keiichi Shirase, Tatsuhiko Sakaguchi, 2008 .

1B1 ASSIGNMENT OF HUMAN OPERATORS TO MACHINE TOOLS AND SCHEDULING CONSIDERING STATISTICAL DISTRIBUTION OF PROCESSING TIMES(Technical Session 1B: Workforce Scheduling 1)

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2013 .

Multi-objective Reactive Scheduling Based on Genetic Algorithm

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2007 .

S1420101 A study on simulation of transportation process of AGV by using social force model

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2015 .

Proposal of a three-layered dynamic supply chain model using backward scheduling

Yoshitaka Tanimizu, Katsuya Tanaka, Rika Kanbara, 2018 .

1312 A Real-time Scheduling of Holonic Manufacturing System : Decision Making Process of Holon and Its Simulation

Nobuhiro Sugimura, Yoshitaka Tanimizu, Kazuaki Inoue, 2000 .

304 Autonomous Distributed Scheduling by Using Multi-agent Reinforcement Learning for Minimizing Sum of Earliness and Tardiness

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2013 .

Expansion of a diffuse co-evolutionary genetic algorithm in reactive scheduling

Yoshitaka Tanimizu, Hideyuki Nonomiya, Tomoya Tanikawa, 2016 .

C30 Agent based integrated system for process planning and scheduling for FMS

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2008 .

A030 A Simulation of Kinematic Deviations of Boring Processes on CNC Machining Centers

Koji Iwamura, Yoshitaka Tanimizu, Nobuhiro Sugimura, 2013 .

Study on process planning system for holonic manufacturing (3rd report, process planning considering machining schedules)

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2004 .

115 Proposal of a closed-loop supply chain model for parts reuse considering economic efficiency

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2013 .

A Study on development of adaptive strategies in dynamic supply chains (Proposal of a framework and two-layered models)

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2009 .

A study on Real-Time Scheduling Methods in Holonic Manufacturing systems

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2002, DIISM.

Game Theoretical Models for Supply Chain Optimization

Yoshitaka Tanimizu, Toshiya Kaihara, Tatsushi Nishi, 2016 .

遺伝的アルゴリズムを用いたリアクティブスケジューリング : 第1報,作業の遅延に対する生産スケジュールの変更(機械要素,潤滑,工作,生産管理など)

Nobuhiro Sugimura, Yoshitaka Tanimizu, Tatsuhiko Sakaguchi, 2003 .

1B1 A STUDY ON INTEGRATED PROCESS PLANNING AND SCHEDULING SYSTEM FOR HOLONIC MANUFACTURING SYSTEMS : MODIFICATION OF PROCESS PLANS(Technical session 1B: Manufacturing systems)

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2006 .

2203 A Study on Construction of Adaptive Strategies in Dynamic Supply Chains : Cooperative Scheduling in Multi-layered Models

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2009 .

Co-evolutionary Genetic Algorithms for Reactive Scheduling

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2010 .

B32 Analysis of Kinematic Motion Deviations of Machining Centers Based on Geometric Tolerances(Advanced machining technology)

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2009 .

A Co-evolutionary Algorithm for Open-shop Scheduling with Disassembly Operations

Yoshitaka Tanimizu, Hideyuki Nonomiya, Michisuke Sakamoto, 2017 .

Multi-Objective Production and Transportation Scheduling Considering Carbon Dioxide Emissions Reductions in Dynamic Supply Chains

Nobuhiro Sugimura, Yoshitaka Tanimizu, Chisato Ozawa, 2012, Int. J. Autom. Technol..

116 Assignment of Human Operators to Machine Tools and Scheduling Considering Statistical Distributions of Processing Times and Yields

Nobuhiro Sugimura, Yoshitaka Tanimizu, Kohei Morita, 2014 .

Integrated Production and Transportation Scheduling for Multi-objective Green Supply Chain Network Design

Yoshitaka Tanimizu, Katuhumi Amano, 2016 .

2204 A Study on Dynamic Task Reallocation Considering Learning Curves in Cellular Manufacturing Systems

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2008 .

A study on real-time scheduling of holonic manufacturing systems

Koji Iwamura, Yoshitaka Tanimizu, Nobuhiro Sugimura, 2005 .

A study on education planning method for human operators considering production plans

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2014 .

Development of scheduling system considering statistical distributions of processing times for human operators

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2012 .

A Study on Integrated Process Planning and Scheduling System for Holonic Manufacturing

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2004 .

A Study on Tool Allocation Method Considering Load Balancing and Optimization of Transportation Based on Mathematical Programming

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2015 .

1314 The fundamental research regarding the analysis of motion deviation of the machine tool

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2007 .

201 Simulation for Transportation Processes of Autonomous Distributed AGV Systems by Using Social Force Model

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2015 .

Multi agent architecture for dynamic incremental process planning in the flexible manufacturing system

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2010, J. Intell. Manuf..

A study on modeling and analysis of kinematic motion deviations of machine tools (2nd report, modeling and analysis of linear tables and mechine tools)

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2008 .

3708 Development of reallocation supporting system of workers using genetic algorithm

Nobuhiro Sugimura, Yoshitaka Tanimizu, Yoshiyuki Sakashita, 2007 .

A Study on Human Oriented Autonomous Distributed Manufacturing System —Real-time Scheduling Method Based on Preference of Human Operators

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2009 .

A study on tolerance design of parallel link robots based on geometric tolerance of components

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2016 .

生産システムの多目的モデリングに関する研究(第3報,階層分散型生産システムのコンカレント・リスケジューリング

Yoshitaka Tanimizu, Kazuaki Iwata, Kouji Iwamura, 2001 .

S142012 Assingnment of Human Operators to Machine Tools and Scheduling Considering Stochastic Distribution of Processing Times

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2013 .

A Study on Computer Support for Manufacturing System Engineering

Nobuhiro Sugimura, Yoshitaka Tanimizu, Keiji Mitsuyuki, 2000 .

A reuse model based on remaining values of rechargeable batteries in closed-loop supply chains

Yoshitaka Tanimizu, Katsuya Tanaka, 2019 .

A study on development of adaptive strategies in dynamic supply chains (Proposal of models and negotiation processes for multi-layered supply chains)

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2010 .

Analysis of Kinematic Motion Deviations of Rotary Tables Based on Geometric Tolerances

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2012 .

A study on estimation of 3-dimensional surface roughness of boring processes including kinematic motion deviations

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2014 .

109 ホロニック生産システムのシミュレーションに関する研究(OS-5 生産システム)

Nobuhiro Sugimura, Yoshitaka Tanimizu, Kouji Iwamura, 2001 .

A study on tolerance design of machine tool components based on shape generation motions (Theoretical analysis considering rotational table positions)

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2017 .

A Study on Real-Time Scheduling for Holonic Manufacturing Systems - Simulation for Estimation of Future Status by Individual Holons

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2007, HoloMAS.

A Real-time Scheduling Method Considering Human Operators in Autonomous Distributed Manufacturing Systems

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2008 .

Evaluation of adaptive strategies of dynamic supply chains in terms of reliability

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2010 .

Disassembly scheduling method using a genetic algorithm

Nobuhiro Sugimura, Yoshitaka Tanimizu, Hideyuki Nonomiya, 2016 .

A Study on Real-Time Scheduling of Holonic Manufacturing Systems(Manufacturing systems and Scheduling)

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2005 .

A study on development of adaptive strategies in dynamic supply chains (proposal and experimental evaluation of order selection methods)

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2011 .

生産システムの多目的モデリングに関する研究 : 第1報, 複数のモデル間の整合性管理の支援

Nobuhiro Sugimura, Yoshitaka Tanimizu, Kazuaki Iwata, 1997 .

動的サプライチェーンにおける適応戦略の構築に関する研究 : 多階層のサプライチェーンのモデルと交渉プロセスの提案( 生産システム部門研究発表講演会2010)

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2010 .

Dynamic Supply Chain Management for Lean Manufacturing

Yoshitaka Tanimizu, 2014 .

A Two-Layered Model for Dynamic Supply Chain Management Considering Transportation Constraint

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2010 .

Extension of two-layered dynamic supply chain model considering transportation constraint

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2009 .

2A1 DEVELOPMENT OF SCHEDULING SYSTEM FOR HUMAN OPERATORS CONSIDERING UNCERTAINTY OF PROCESSING TIME(Technical session 2A: OS1: Practical scheduling approach(2))

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2011 .

Real-time Scheduling in Holonic Manufacturing Systems : Scheduling based on Simulation

Nobuhiro Sugimura, Yoshitaka Tanimizu, Kouji Iwamura, 2002 .

F-0618 A Study on Decision Making Processes for Holonic Manufacturing Systems : Framework of Decision Making Processes

Nobuhiro Sugimura, Yoshitaka Tanimizu, Kouji Iwamura, 2001 .

A Study on A Real-time Scheduling of Holonic Manufacturing Systems : Development of Emulation System

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2002 .

A study on engineering process support for manufacturing systems (1st report, description of manufacturing system engineering process and development of support tool)

Nobuhiro Sugimura, Yoshitaka Tanimizu, Keiji Mitsuyuki, 2002 .

104 数理計画法に基づく負荷平準化および搬送最適化を考慮した工具配分に関する研究(OS1-1 スケジューリングI)

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2012 .

Supply Chain Optimization Through Cooperative Negotiation by Using Backward Scheduling

Yoshitaka Tanimizu, Rika Kanbara, 2021, APMS.

Analysis of geometric deviations of machine products under maximum material conditions

Nobuhiro Sugimura, Koji Iwamura, Yoshitaka Tanimizu, 2007 .

A study on closed-loop supply chain model for parts reuse with economic efficiency

Yoshitaka Tanimizu, Yusuke Shimizu, Y. Tanimizu, 2014 .